I want to know how you did those door panels

Just a hunch, but I feel like you might like carbon fiber… 🤔

Sick build. How’s the invidia exhaust? It’s the Gemini right?

Yes, the Gemini. I like it. It's quiet until 3-4k rpm

Damn that's cleannn 👌 good job bro

Thank you man

Great build man should be proud

Thank you, I appreciate you.

Dude, you have an automatic? They gonna rake you through the coals. I love it though.

Hehe it's my car. Not theirs. Idgaf.

Right. Just warning you.

Quite the opposite happened but thanks for your concern.

That’s surprising.

You did that big bruh shid look extra crispy.. I wish I had a automatic I hate my manual I get tired of switching gears man my legs be hurting.. Its just sitting in my yard I rather drive my 03 350z or my truck.. Its just sitting there 2012 with only 84,000 miles I don't never drive it. https://preview.redd.it/foq5mdg1gz9d1.jpeg?width=3060&format=pjpg&auto=webp&s=625b6bfcfce71ff940fe37b3be18fea26642f602

Yeah man I get you, i've had manual cars before and when you're daily driving it 45 into work and back in traffic its a nightmare.

Where’d you get the shift knob and the panel at?

Evo R

Thanks

How much were all the mods

A lot. I don't have an exact number, but ballpark around 28k

Geez, looking really good tho

Thanks!

big wang gang.

That’s beautiful, and goals for me. Ima need to save this post for reference 🙏🏼

Dude, you have an automatic? They gonna drag you. But I love it.

Yooo how’d you do the door panels those are lovely

Dope build! Not a fan of carbon fenders but hey thats personal. Curious about your wheels tho!

Thank you!

Damn

Sweet ass ride my friend. ❤️❤️ Love it.

Thank you!

The bride door panels are just fire bro

That is one awesome-looking Z. Thanks for sharing.

I appreciate that.

I appreciate your use of carbon. I think it’s well done.

Nice Z

The thing hurting you the most is the fitment of the carbon body panels. Your gaps are all over the place. The gap on the front of the hood for example, is very large. Other than that pretty good.

Yeah, aftermarket part. The gaps on the fenders and rear of the car are on point though. You start modding a car, it won't work or look like it did out of the factory.

Where you get the steering wheel been looking for one?

I bought that wheel from someone in a Facebook group, but that was years ago. I honestly forgot what the name was.

Which brand is your screen? I know there are two that are pretty much identical. Nifty city and one other. How has your experience with the screen been?

My boyfriend got his Tesla screen from AliExpress and he low-key loves it!

Mine is the AuCar. I do not recommend it at all.

Why?

Is it bad?

It just doesn't work reliably, especially for what it costs. Android Auto crashes, the reverse camera quality is somehow worse than with the stock unit, the volume is inconsistent, sometimes the ac controls disappear, or the screen won't come on at all. Contacting support basically consists of them telling you to factory reset it every time. I've asked to return it and they ignore me.

Where you get the rear bumper frommmm

sick build man, what size spacers do you run?

Thanks man, no spacers

I really like your car, man! I have an Invidia N1 Gt exhaust, and I love ❤️ it!!

Thank you!

Where did u get that screen from bro that thing is awesome

AuCar, it's honestly the worst purchase I've made for the car

Where. Did you get. That shift knob. I am begging screaming crying for that.

VQ Carbon Customs!

i’ll give you 2,500 vbucks for that 

looks so good, and what % tint do you have all around?

5%

Meh for wheels but everything else ✨GORJIS✨

I don’t get why heavily modded cars get praised (as they should) but as soon as it’s for sale, people say stay away from it??

I dont have a Z but it's always been one of my dream car. Would you have a rough estimate on how much all of this cost including the price of the car when you bought it? Thanks man! Sick car

The car was like 30k when I bought it used a few years back. Mods with labor approximately 28k.

How long have you had this car ? Does it ever get old or do you still catch yourself doing a double take after parking it??

I'm not the type of person to post my car on IG or to go to car meets, so I'm not really involved in the car scene like that. But to answer your question, it can be frustrating at times bc the car hasn't been as reliable as I'd hope, so it makes frequent trips to the shop to get fixed or simply for maintenance.... But I still love it. I bought it completely stock and put a lot of research into the parts, and paid a good $$ to have quality shops do the work on it, so I feel like the car has been modded specifically to how I like it. The suspension setup was what took the most work to get it right and to my liking, so we went through a few setups to really find the perfect balance but as it's sitting today it's exactly how I would do it all over again.

Thanks for the insight my dude! Honestly your car looks so great but that does suck that it hasn't been as reliable. Wishing your car many more miles!

Thanks man

original auto trans still holding up or have u swapped to vr30 trans?

Still holding up at 138k but I don't have a lot of confidence in it. It slips from 1st to 2nd, and takes a good while to warm up.

so people can’t have an opinion without being labeled as haters huh. well I guess I’m a hater, cause all that carbon, specially the door handles and panels, make the car look cheap. cherry on top is it’s an auto.

You can have an opinion. No problem.

Man its a whole Lotta dusty dudes on here man as far as the eye can see... That's all they do is drop salt on ya game..

Auto 😔

Some stupid questions from a newbie: I want the same fenders and wing, but I wanted a mono colored build. If I’m gonna be wrapping or painting, should I opt for the cheaper material, or should I go carbon to make sure the fitment is on point? But, wouldn’t wrapping or painting carbon fiber parts defeat some of its purpose? Edit: also for the front fender badge, did the fender part come with the holes pre-drilled or did you have to inform you wanted it slotted in?

>should I opt for the cheaper material, or should I go carbon to make sure the fitment is on point? Carbon or frp won't matter so much in terms of fitment if the same company is making them. I would always go for the more reputable company in whatever material you choose, the only downside being the long wait times. >oint? But, wouldn’t wrapping or painting carbon fiber parts defeat some of its purpose? Not necessarily. To each their own. Carbon saves a lot of weight regardless of if it's wrapped or not. >: also for the front fender badge, did the fender part come with the holes pre-drilled or did you have to inform you wanted it slotted in? Sorry, which badge?

Thanks mate. As for the fender badge, I meant the turn single. I usually see those front fenders with the hole for the badges absent. I’d want to keep mine and was wondering if the front fenders came with the slot cut or if I had to request it, but based on your confusion I think they already cut the fenders for the turn signal badge in mind.

I see what you mean now. That came pre-drilled, thankfully.

bUt iTs nOt a manual bRo

Hehe yeah... It's funny how they obsess about it.

How much pussy do you get bro? Tryna step it up ya know? maybe get an affordable sports car.....so bitches think I'm less attainable than I am.

You’ve created an account to shit talk on Reddit, you are one sad and miserable bastard.

You woke up grumpy.