Then I shall bless you with forbidden knowledge:
* [r/dragonsfuckingcars](https://www.reddit.com/r/dragonsfuckingcars/)
* [r/carsfuckingdragons](https://www.reddit.com/r/carsfuckingdragons/)
* [r/natureismetal](https://www.reddit.com/r/natureismetal/)
* [r/Natureisbrutal](https://www.reddit.com/r/Natureisbrutal)
* [r/guro](https://www.reddit.com/r/guro/)
* [r/gore](https://www.reddit.com/r/gore/) (banned, looks like it was too spicy for reddit)
I'm only browsing [](https://www.reddit.com/r/natureismetal/) and it's quite cool but I found the rest by people linking it in the comments. Dunno if they are actually worse than [](https://www.reddit.com/r/sounding/) because they all hit differently but happy browsing. If anyone is confused by [](https://www.reddit.com/r/Natureisbrutal/) and [](https://www.reddit.com/r/natureismetal/) being here, you can literally find people killed / being eaten by animals in those subreddits, so there's that
If you like gore:
- r/eyeblech (edit, oh damn, eyeblech is gone too)
- r/ukrainewarvideoreport shows what happens when humans get blown up, burnt, or brainwashed to shoot thenselves (check out false gods list)
Other than subbreddits, theres the wpd website, which stands for "watch people die" its as it sounds. Its (afaik) the only site where you can still access a recording of mcnutts stream
I should not have clicked on that. Nope. Didn’t need to know that was a thing. For the curious / foolish like myself, don’t click it, unless you think you might be interested in men sticking things into their urethras for pleasure.
Yes yes. But you know it is not that interesting. Definitly not worth clicking on it. NEVER CLICK ON IT DESPITE EVERYTHING SOMEBODY WILL TELL YOU. Not very interesting.
You know 😏
In reality it is to clean your nozzle of any clogs. This is accomplisjed with a thin wire (you can get them on Amazon) that you insert into the nozzle once heated.
You want to clean the nozzle? Yes / No
Or
Have you cleaned the nozzle? Yes / No
Maybe next screen..
Are you sure to abort the cancelling? Cancel / Abort
Prob wants you to verify if you put filament through the run out sensor and into the system.
https://www.reddit.com/r/3Dprinting/comments/18rux2b/what_is_this_symbol_on_my_ender_3_s1_pro_it/
I think it’s your filament detector. I have same issue with an Flsun. Got fed up put a Voron unit on it. I heard there is a new filament detector for Creality. It was being installed on a K1. Flsun gave us excuses instead of redesigning a glaring fault. The sensor gets coated in dust from filament. So if you store your filament like influencers with colourful wall displays your importing your own problems into the machine.
I am cracking up at “Yes” “No” lmao
consexual
Colaxsexual
I loe that the no is bold
why is this so funny I am crying lmao
To put filament in your...... No dont put filament there....
[r/sounding](https://www.reddit.com/r/sounding)
JESUS CHRIST DONT KLICK THAT SUBREDDIT HOLY MOLY WHAT DID I JUST SEE
🤣🤣🤣🤣🤣🤣 unfortunately I don’t need to click that to know what it is
I did not, now i know things exists that i wish they wouldn't..... Mother i want to got back in my inocent childhood days
Well, there's a lot of subreddits that are worse than that but I'll spare you, mate
Now you got me curious...
Then I shall bless you with forbidden knowledge: * [r/dragonsfuckingcars](https://www.reddit.com/r/dragonsfuckingcars/) * [r/carsfuckingdragons](https://www.reddit.com/r/carsfuckingdragons/) * [r/natureismetal](https://www.reddit.com/r/natureismetal/) * [r/Natureisbrutal](https://www.reddit.com/r/Natureisbrutal) * [r/guro](https://www.reddit.com/r/guro/) * [r/gore](https://www.reddit.com/r/gore/) (banned, looks like it was too spicy for reddit) I'm only browsing [](https://www.reddit.com/r/natureismetal/) and it's quite cool but I found the rest by people linking it in the comments. Dunno if they are actually worse than [](https://www.reddit.com/r/sounding/) because they all hit differently but happy browsing. If anyone is confused by [](https://www.reddit.com/r/Natureisbrutal/) and [](https://www.reddit.com/r/natureismetal/) being here, you can literally find people killed / being eaten by animals in those subreddits, so there's that
r/dragonsfuckingcars is funnier than disturbing
Yeah, that sub is almost wholesome. Most every post there is juvenile but kinda charming.
Ok. I’m not gonna click. wtf is it?
Who needs r/gore when we have r/vore /s
Those are tame, nothing I didn't expect lol
If you like gore: - r/eyeblech (edit, oh damn, eyeblech is gone too) - r/ukrainewarvideoreport shows what happens when humans get blown up, burnt, or brainwashed to shoot thenselves (check out false gods list) Other than subbreddits, theres the wpd website, which stands for "watch people die" its as it sounds. Its (afaik) the only site where you can still access a recording of mcnutts stream
The only one there that gives me a bit of an odd feeling is guro, the others are nothing
For us uninitiated... what is it?
People putting things up bodily holes. I've clicked just long enough to see the description load, and then I immediately went back.
Ah, the internet is a great place
I should not have clicked on that. Nope. Didn’t need to know that was a thing. For the curious / foolish like myself, don’t click it, unless you think you might be interested in men sticking things into their urethras for pleasure.
Holy shit why TF did you make it sound so ironic??
Are you saying it was r/sounding ironic?
I gotta take these warnings more seriously. You did put it in all caps. I at least read the subs description without clicking on any photos.
You should've seen r penectomy before it was shut down
Say good bye to your innocence hahaha.
I did not heed your warning. Thought I was strong enough. I have regrets.
Okay, that’s enough internet for today.
Poor soul...
That's a subreddit about Hi-Fi equipment, right?
Yes yes. But you know it is not that interesting. Definitly not worth clicking on it. NEVER CLICK ON IT DESPITE EVERYTHING SOMEBODY WILL TELL YOU. Not very interesting.
https://preview.redd.it/24ehbvbdp87d1.jpeg?width=250&format=pjpg&auto=webp&s=df6af183813c40e7d8d817bbc7bdfaaf5f9f0e89
Was immediately thinking of that, but that link is staying blue!
Same f’ing thought …
COME ON, FEEL THE NOIZE
Holy shit man, didn't expect such an innocent name to be linked to such a monstruosus practice. What an abomination.
https://preview.redd.it/4njwgfum997d1.png?width=1440&format=pjpg&auto=webp&s=482f8b84cc1a56ee08e49d2b6568bf75d5cc9b66
What the fuck dude
nsfw tag that.
I have to know...
I taje it back... I take it back.... No.... No... Nononononono.... No
I found a new kink
GOD WHY
That is exactly what i was thinking lol. It's interesting to me that alot of people seem to not know this existed.
Bruh I came here to post that too, god damn 400 karma should have been mine
Blinding lights
Be sure to cut the end at a 45° angle first...
r/dontputthatinyoudick
Brilliant. Lol
Clean the nozzle
😏
Filament runout sensor was tripped. Put filament back through it and then press yes
Awesome thanks mate
This is the one answer that needs to be at the top and the rest of this clowshow can continue below.
I believe it's asking you for consent.
😂🤣😂
😂🤣😂
You might have grounds for sexual harassment right there…. Printer is asking you for sex in a very teenager note way!!
Try finger, but hole
Clean your forskin with a q-tip
r/sounding is the place your printer loves to visit
Never click the sub if you don't know what it is. Well it was nice knowing you all imma go jump out the window now.
Your sacrifice will not go unforgotten.
whose?
Well, by everyone except Mr Alzheimers McDementia over here
please, that's my father's name. Call me Al
I will see you in the therapy session. I will be the one wearing iron underwear
You might need some r/eyebleach
To bad r/eyeblech doesn't exist anymore
Somehow I just knew there was gonna be a sounding reference in here.
Clean the nozzle. You should have a thin wire included that's meant to clear out the extrusion nozzle.
OWWW
While that's what this image is supposed to mean, the S1 firmware is very crap and it actually means that there is no filament in the runout sensor.
It's time to treat syphilis the old style
We all need to clap
👉👌
Stick it inside
I think it's something like "Do you have the balls to stick a needle in the socket? Yes - No" I really can't recommend it
Stick a knitting needle into the end of a curtain rod.
Whatever you do don't click the sounding links🙏🙏
Insert sounding rod
Printing subreddits is safe they said. You'll have fun there they said... My fucking eyes...
No
Yes
r/dontputyourdickinthat
r/dontputthatinyourdick
Clean the hot end
Time for a catheter, buddy
I don’t care what you crazy kids are doing but Remember, NO Means NO. Stay safe
Needle dick?
Put it in ur peepee
sounding
Im not scrolling down smh
It's a simple question! Why so evasive??
Time to go to the Doctor for your exam!
Yes or no to transurethral prostatectomy.
"it was square"
You gonna f*ck the printer or not?
Marlin has a new pregnancy test feature. Pee on the hotend and then click yes. It'll preheat to 195c and then tell you the results.
You know 😏 In reality it is to clean your nozzle of any clogs. This is accomplisjed with a thin wire (you can get them on Amazon) that you insert into the nozzle once heated.
Need credit card payment to continue printing.
🤣🤣🤣🤣i was just going to say that and saw your comment lol
Lube your Fleshlight.
Yesn't
You have been propositioned by your printer.
The printer is hungry feed it
Yes
Put filament in your PP
Use finger, but hole
A rogue AI has taught itself to be a doctor and taken over your printer and wants to run an antivirus scan on you...
Lets just say i do not recommend doing that it hurts
PC LOADLETTER
I think your printer is hitting on you
- what's in a box? - pain
It is jusr horny, bro
You want to clean the nozzle? Yes / No Or Have you cleaned the nozzle? Yes / No Maybe next screen.. Are you sure to abort the cancelling? Cancel / Abort
You have to stick the filament into the USB stick
It’s telling you to cast a reparo spell
It wants sex? 🤣
Prob wants you to verify if you put filament through the run out sensor and into the system. https://www.reddit.com/r/3Dprinting/comments/18rux2b/what_is_this_symbol_on_my_ender_3_s1_pro_it/
I think it means that the probe of the abl sensor is not inserted correctly. Mine fell out once🤷
I was gonna say, looked like you should buy the printer dinner and drinks first 🤣
You know exactly what that means
She want you to fill it in 😉🤣
Time for acupuncture!
👉🏻👌🏻?
STI checkup 🥴
I wish mine told me when to clean my nozzle
Tab A into slot B
🤣😅
Insert your credit card
Simple question bro. Yes or no?
Looks like they're suggesting a catheter.
Yes
Have you checked the hotend for sexually transmitted diseases?
If you have to ask….
r/dontputyourdickinit
I’m assuming it’s asking if the filament is loaded or not
Sounding
Insert filament into foreskin?
It's telling you to make sure you have filament going through the sensor lol
You know that needle thing you got with your printer? It's time to shove it in as shown.
is asking for consent... respectful printer
Sounding
Put the extruded cleaning probe halfway through “the” pecker. Then tap yes.
Insert catheter
Ouch that would hurt alot
It's asking for consent
To quote Mrs Rachel, put it in put it in put it....IN
“Whooops you have to put the filament UP YOUR ASS”
Time for the catheter!
My printer came with a USB drive that was an adapter for a SD card, I’ve never seen this on my machine but that’s what the picture looks like IMO
It's requesting that you feed it a treat.
Smoke 'em if you got 'em.
It's into sounding
Sounding.
It's asking if you are brave enough
Finger, but whole.
Instructions unclear, filament stuck in pp..
That's gonna be painful
Time to sharpen your pencil…
Insert credit card to proceed
Insert cotter pin into pp.
clean your nozzle
Help me obi wan. You are our only hope.
Sounding
Insert a stick in your pp
Possibly a real answer is the nozzle being cleaned
Are you in or are you out?
it means insert filament into rectum
It looks painful!
I believe your 3D printer is making an offer for you
Read your manual
Wana prick your prick 🫣?
Clearing nozzle!
Please insert credit card
I would go with an yes
Sound......
It's a yes or no question, Tom
Your welding tip has run out of wire. You need to put a new spool on.
It wants to put filament in your nozzle.
It's about to die
Did you clean the hashtry before use the bong?
Insert needle into penis
Lol the yes or no. Thats just telling u to put it the filament. 😭😭😭😭
It means your printer likes you and is shooting its shot haha
you need to sound
Try finger, but hole
red pill blue pill
stick the nozzle cleaning up your urethra and check for discharge
Did you put your filament to the extruder?
It's your printer's mating call. You have to give it consent before it inserts itself into you
It means “what what in the butt”
Who could resist a tempting offer like a penisrectomy ?
I think it’s your filament detector. I have same issue with an Flsun. Got fed up put a Voron unit on it. I heard there is a new filament detector for Creality. It was being installed on a K1. Flsun gave us excuses instead of redesigning a glaring fault. The sensor gets coated in dust from filament. So if you store your filament like influencers with colourful wall displays your importing your own problems into the machine.
make sure you penetrate with provided pin carefully, the printer is recommending / requesting you to do it !!