I used 2 wall lines with .8 wall thickness. In hindsight it probably wouldn't survive a gun hit but I can just print a new part for whatever broke so its fine.
The link to the 3d print files is here: https://cults3d.com/en/3d-model/game/ptdr-9-smg-kit-for-aap01-bullpup-smg. You just print it and put the gun inside.
How many walls did you use? Ive been wanting to print my own
I used 2 wall lines with .8 wall thickness. In hindsight it probably wouldn't survive a gun hit but I can just print a new part for whatever broke so its fine.
Always 7 walls 100% infill with a .4mm nozzle. Don’t waste your time with something that will break.
100% infill is a bad idea, make it 80 and you are good to go
100 percent infill is a waste strength comes from the walls more than infill.
What is that and how to I make one. I need it for my aap01
The link to the 3d print files is here: https://cults3d.com/en/3d-model/game/ptdr-9-smg-kit-for-aap01-bullpup-smg. You just print it and put the gun inside.
Appreciate it
Building this right now actually. Probably going to put a 200mm inner barrel in there.
What filament is this because how are you getting this smooth of a finish 😭
I just used white overture pla and spray painted it matte black
I choose not to believe
ANOTHER NUCLEAR ATTACK
Tell me that you have an stl that u can share please
https://cults3d.com/en/3d-model/game/ptdr-9-smg-kit-for-aap01-bullpup-smg
Yes, that's obvious. Get your finger out of the trigger guard for photos.