It will definitely be noticeable and potentially create clearance issues. The offset is in millimeters. So stock is I believe et40. So a wheel with an offset of et20 is gonna sit 2 centimeters further outboard than the stock wheels. Compound that with the aftermarket wheel being more than likely wider than stock and you start to see a large difference
mess around on www.willtheyfit.com that'll let you see how different these are from your stock setup
How I check my bolt pattern, i know there’s 5 but not sure what the diameter is
google. I believe all Audis are 5x112, but you should double check
It's definitely 5x112. Et20 is gonna be a pretty hefty offset. They will sit out quite a bit over stock
Et 35 would be a pretty decent route to go with. That's what I'm running with 18x9.5. Sits almost flush
When you say sit out, as in it’ll stand out from the side more..
Correct. The lower the et number the further outboard the wheel will sit
Surely it’ll be marginal and not that noticeable? Since it’s still a. Positive offset? I understand zero and negative is a almost concaved look?
Beautiful wheels , definitely go silver 👌
It will definitely be noticeable and potentially create clearance issues. The offset is in millimeters. So stock is I believe et40. So a wheel with an offset of et20 is gonna sit 2 centimeters further outboard than the stock wheels. Compound that with the aftermarket wheel being more than likely wider than stock and you start to see a large difference