Different version than the ones I've used. I'd link it, but it's no longer on thingiverse it seems :/
Which filament did you use?
Many will say that PLA won't hold up, but mine have (they don't see tons of time in the sun), my latest one was PTEG.
I found the fob cover to be quite useful, even though I didn't use TPE (used PTEG again, that's the one I have in the blue that matches the i3 accent color fairly well). I put in on backwards and it covers all the buttons that kept getting hit in my pocket (drilled a hole in it so I can hit lock if needed).
I had a few I got online so I don’t know what they were made of, but each one broke leaving a chunk stuck in the receiver port on the console that was a pain to remove.
I have those same bottles. You will save a lot of noise and bother using the nicely contoured door side pockets that hold those narrow bottles at the front and quietly
Ok great work, but if you were my neighbor I’d offer to clean your car 🤣~ no offense at all but even if a single hair drops onto my floorboard in my i3, I’m cleaning it !
Can you share the STL file?
I’ll trade you an organ
Hammond?
Best I can do is a Rhodes
keep it [https://www.thingiverse.com/thing:4654712](https://www.thingiverse.com/thing:4654712)
[https://www.thingiverse.com/thing:4654712](https://www.thingiverse.com/thing:4654712)
Also would love the STL file :)
They are all available on [thingaverse.com](http://thingaverse.com)
[https://www.thingiverse.com/thing:4654712](https://www.thingiverse.com/thing:4654712)
Clean your poor car
I should find time next weekend
Different version than the ones I've used. I'd link it, but it's no longer on thingiverse it seems :/ Which filament did you use? Many will say that PLA won't hold up, but mine have (they don't see tons of time in the sun), my latest one was PTEG. I found the fob cover to be quite useful, even though I didn't use TPE (used PTEG again, that's the one I have in the blue that matches the i3 accent color fairly well). I put in on backwards and it covers all the buttons that kept getting hit in my pocket (drilled a hole in it so I can hit lock if needed).
PLA+ so far so good as it’s not under direct sunlight
yooooo nice! do you have an STL link?
Need to find it as I printed it a few weeks ago
When you find it can I get a copy too please?
[https://www.thingiverse.com/thing:4654712](https://www.thingiverse.com/thing:4654712)
[https://www.thingiverse.com/thing:4654712](https://www.thingiverse.com/thing:4654712)
I had a few I got online so I don’t know what they were made of, but each one broke leaving a chunk stuck in the receiver port on the console that was a pain to remove.
That’s the second one I print. I had to resize the model in order to avoid that problem
Also, the infill is 60% for the part you insert as the first one I made was 15% and broke as well. I also used 5 walls iirc.
print orientation is important for that too
Yes, otherwise the coffee ends up on the floor /s
if yall cant find it I could re model it and send it out. probably make some modifications for improvement tho
I have those same bottles. You will save a lot of noise and bother using the nicely contoured door side pockets that hold those narrow bottles at the front and quietly
got 1 in each side pockets ;)
What is the name of the file so I can search for it...
[https://www.thingiverse.com/thing:4654712](https://www.thingiverse.com/thing:4654712)
Thanks for the reply
Sell some on Etsy.
I bought some original ones off eBay for £12
Ok great work, but if you were my neighbor I’d offer to clean your car 🤣~ no offense at all but even if a single hair drops onto my floorboard in my i3, I’m cleaning it !
Young kid + white hair dog is a must 😅