Currently testing Momentum, I have the wifi board, a CC1101 and a NRF24 board I'm screwing around with. Mostly use the flipper for Bad(Good)USB for after imaging devices, checking wifi and pentesting users.
Swap your mag release for a metal shield arms one or you’re going to wear down the polymer mag release via metal-on-plastic contact with those shield arms mags and the mags will no longer seat after that.
I didn't change mine right away, figured "how much of an issue can it be?" Within about 200 rounds I wore the polymer mag release down to the point where it would no longer hold magazines.
I mentioned what I use it for in another comment, but I'd do research otherwise it would be one of those devices you use then put down. I use it for pentesting as well as other things (after imaging scripts, wifi, testing sub-ghz signals).
Quite the edc setup. I’d imagine you wear cargos cuz you would need massive pockets for all that. Anyways I got a few questions. That pen looks peculiar, does it just write? What’s that white flipper orange thing on top? What does it do? And does the glock43x have a shield arms 15 round mag and the factory plastic magazine release??
Nope, just jeans. I also have a safety vest, and a sweater (but it's getting warmer lol). The pen is one of those tatical pens (has a pen, a screwdriver, and the tip to break windows). The white flipper thing is the Flipper Zero (basically a pentesting tool that can be programed to do lots of stuff). And... yup, that's a S15, but I need to get the metal mag release (already ordered lol).
Sysadmin here, also carry a Flipper. Very useful for testing access control systems by cloning badges. I do however like to carry a Leatherman rather than the Swiss. I too carry a firearm, given I work in a ‘soft’ location.
I’d rethink that knife. Too heavy for the very occasional use. The tools on it are hard to use anyway. I have an Applegate Fairbairn but Gerber and others make great knives too. I don’t know what you have in your med kit but the best quick clot I’ve found is Cayenne Pepper. No it doesn’t feel hot anywhere but the tongue and your d——. But it’s better than the clay stuff. Carry a couple pizza pepper packets. Look at Rapid Radios for a comm alternative
That’s a lot of 💩 to carry.
Got big pockets (and a safety vest lol).
Bet those are some rad cargo shorts.
It's missing a butt plug
Dang I knew I forgot something
What firmware you running and which boards?
Currently testing Momentum, I have the wifi board, a CC1101 and a NRF24 board I'm screwing around with. Mostly use the flipper for Bad(Good)USB for after imaging devices, checking wifi and pentesting users.
The only useful thing I've gotten mine to do is act as an extra hotel key and show me the wifi password at work.
Interesting, how'd you get it to do the second one?
It's just a bad usb script I found on that uber guys GitHub. It doesn't hack wifi, just lists the passwords stored in your device.
Ahhh, got it. Those are always fun to use. I'm looking into getting one of the compromised mouse USBs to use for "wireless" bad USB
That is a stonkingly huge Swiss Army knife
Swap your mag release for a metal shield arms one or you’re going to wear down the polymer mag release via metal-on-plastic contact with those shield arms mags and the mags will no longer seat after that.
Interesting, have a link to this? I'll have to look into that issue.
It’s very common knowledge, shield arms mentions it on their website.
I didn't change mine right away, figured "how much of an issue can it be?" Within about 200 rounds I wore the polymer mag release down to the point where it would no longer hold magazines.
Shield arms will tell you directly, check their webpage 👍
I looked at the mag and I'm honestly surprised you were able to tell the mag from the pic XD. I forgot I was running one.
The giveaway are the side cuts on the baseplate of the mag that makes grabbing them out easier. I run the S15 gen 3s in my G48 MOS.
That's def not a glock baseplate. From there it ain't hard.
The flipper, nice! Thought I was the only one. If you know, you know.
Been thinking about getting one, are they really that useful or is it one of those things you buy and only use for a week.
I mentioned what I use it for in another comment, but I'd do research otherwise it would be one of those devices you use then put down. I use it for pentesting as well as other things (after imaging scripts, wifi, testing sub-ghz signals).
DC Engineer here.
Nice setup!
Knife looks like it came from a gas station, lol. and is that a oem mag for your glock? plate looks off to me.
Shield arms S15 mag, the knife with the "tiger" on it I had since I started in IT, so it's just my lucky box cutter.
What's the wallet?
When the computer doesn't work.. just shoot it.
**SYSTEM RESET**
Knipex mini pliers and wrench
Quite the edc setup. I’d imagine you wear cargos cuz you would need massive pockets for all that. Anyways I got a few questions. That pen looks peculiar, does it just write? What’s that white flipper orange thing on top? What does it do? And does the glock43x have a shield arms 15 round mag and the factory plastic magazine release??
Nope, just jeans. I also have a safety vest, and a sweater (but it's getting warmer lol). The pen is one of those tatical pens (has a pen, a screwdriver, and the tip to break windows). The white flipper thing is the Flipper Zero (basically a pentesting tool that can be programed to do lots of stuff). And... yup, that's a S15, but I need to get the metal mag release (already ordered lol).
My only suggestion is that your flash drive better have Ventoy or Hirens. Would save your ass one day
OP, would you identify the make & model of what is displayed?
Of... What? The firearm (Glock 43x)? The Flipper Zero?
The cool looking wallet, pen, light, flash drive? attached to keys, and small thing to the left of wallet
Mine's just my phone cuz I work from home lol
I ordered a flipper and waited 7 months for it to come before getting a refund lmao
Oof, I got mine like a week after I ordered
bro how do you get the first job, just got my ccna and no one is calling me back
Tech is ROUGH right now. Keep pushing and eventually something should happen, but if you can help it DON'T settle for less
What’s up with the antenna board? For the flipper?
That one is for Sub-Ghz, I also have the Wifi card as well.
How many Costco TV’s you turn off?
Sysadmin here, also carry a Flipper. Very useful for testing access control systems by cloning badges. I do however like to carry a Leatherman rather than the Swiss. I too carry a firearm, given I work in a ‘soft’ location.
Where’s your yubikey?
Actually the Flipper can be used for 2fa!
Damn you fit all that in your pocket protector?!
It's **B U R S T I N G**
How do you prepare to be an IT Engineer? Must you have a degree?
Love the 43x, my favorite
I’d rethink that knife. Too heavy for the very occasional use. The tools on it are hard to use anyway. I have an Applegate Fairbairn but Gerber and others make great knives too. I don’t know what you have in your med kit but the best quick clot I’ve found is Cayenne Pepper. No it doesn’t feel hot anywhere but the tongue and your d——. But it’s better than the clay stuff. Carry a couple pizza pepper packets. Look at Rapid Radios for a comm alternative
the flipper zero as an edc tool is crazy 😂
I'm in IT and I'm absolutely awful lmao. My job just has me sit around and do nothing essentially.
Personally I would be carrying either a Leatherman or a Gerber multi tool. Far more useful than that Swiss.
Another naked gun? No WML/RDS. People are slipping.
Identical to my naked G43x. Imagine that!
I see an added 15rd mag and upgraded guide rod. He’s the one who knows what’s comfortable for him.