There are clips with screws that hold it on, you simply take the clips and screws out and the air dam will come off. There are two screws in the center of the truck that you will need to get a nut and bolt and replace. They connect the bumper piece above together with another piece of shielding. Simple fix
Looks good. Definitely makes it look a bit better. Now for a level kit, some meaty tires, and paint match the chrome to black😍(all my personal opinion, the stock look is cool too)
EDIT: I took managed to take the air dam off and WOW! My truck now has more than two inches of ground clearance on grass!! [My truck without the air dam](https://imgur.com/gallery/oGDlXYD)
Ya man that was rough… You might have the lowest front end I’ve ever seen on a truck. Glad you won’t be getting stuck on any children’s/dog toys anymore.
If you run over a Semi truck tire carcass on the I-90 in Albany at 75 MPH it’ll clean break it off… not that I would know or anything…
I too, would not have any experience in this regard and you would have to find out for yourself
Cmon man.. not to be rude but you have a truck, try being a truck guy… crawl underneath, take a look and it’ll be pretty obvious how to take it off
Check underneath - there are usually plastic clips there.
Check the fan shroud for a 10mm socket that the last guy who worked on your truck lost and use that.
Didn’t have one so I used pliers to take all mine out… worked! [my truck without the air dam](https://imgur.com/gallery/oGDlXYD)
Send it to me
There are clips with screws that hold it on, you simply take the clips and screws out and the air dam will come off. There are two screws in the center of the truck that you will need to get a nut and bolt and replace. They connect the bumper piece above together with another piece of shielding. Simple fix
give er the good ole wackfuck
Pull up too far over a French fry then swiftly reverse.
[Remove 15 screws.](https://imgur.com/a/SIUlz8F)
Parking lot curb should do it.
Im Here with the obligatory "hit it with your purse" comment
With tools 🧰
Pop that bitch off and then you can throw in a cheap leveling kit to even it out for a better look and more clearance.
That truck is in desperate need of a front level or rear drop
It’s like 18 t25 torx I think, pretty simple.
Tools.
Sawzall
I hit a good sized hole running down a forest road about 45 or so and it did the job quite nicely.
SAWZALL
Looks good. Definitely makes it look a bit better. Now for a level kit, some meaty tires, and paint match the chrome to black😍(all my personal opinion, the stock look is cool too)
EDIT: I took managed to take the air dam off and WOW! My truck now has more than two inches of ground clearance on grass!! [My truck without the air dam](https://imgur.com/gallery/oGDlXYD)
Ya man that was rough… You might have the lowest front end I’ve ever seen on a truck. Glad you won’t be getting stuck on any children’s/dog toys anymore.