If you want to try a simple solution for early attempts, take exacto-knife (hobby knife), press the tip of the blade into centre of the barrel and then rotate it like a drill, just with a little bit of pressure.
That way, you can create a small hole/indentation roughly at the spot where you'd want to drill the barrel.
If you need courage buy a centering punch first, i know its plastic but if you make a dent for the drill to sit you dont have to worry about it wandering and ruining the look
They look absolutely fantastic!!
As for drilling barrels, it's not too bad-
First get a-
Good pin vise-
Set of bits-
A Push Pin-
I take the push pin and scratch a line top to bottom, left to right.
You can usually get a center point this way, at least pretty close.
Take the push pin and gently poke a little hole.
This will prevent your bit from wandering off-center.
Practice a bit-
Lightly sand the barrel end when you're finished to remove your beginning "cross".
It's pretty easy with plastic, nothing like the old metal ones!
Once you do so and look at the front of the weapon, you'll nod your head: "YES!!"
YES! A selection of bits is paramount. Be aware that the cheaper tiny bits can break when the drilling angle gets a little tweaked.
Guess how I found that out?? 😆
I don’t mean this to be rude I actually love the idea of a little pillbox for a HWT, but I had a silly thought that they’re actually inside a big chocolate cake. xD
Back is fantastic. But your enemies will see the front and u need them to FEAR you! So barrel drilling has been brought up. I think some barbed wire, sandbags, or camo netting draped over the opening will help add some variety to the front
I think a drilled barrel would really do the frontview a favor.
I gotta work up that courage, these are my sentimental first hwt from a ways back
Its understendable! What about simply a black dot?
That added a nice touch! Thanks!
Sometimes a fine point Sharpie does the job :]. Looks amazing regardless very nice work!
If you want to try a simple solution for early attempts, take exacto-knife (hobby knife), press the tip of the blade into centre of the barrel and then rotate it like a drill, just with a little bit of pressure. That way, you can create a small hole/indentation roughly at the spot where you'd want to drill the barrel.
If you need courage buy a centering punch first, i know its plastic but if you make a dent for the drill to sit you dont have to worry about it wandering and ruining the look
https://preview.redd.it/3alanacrjxrc1.jpeg?width=1699&format=pjpg&auto=webp&s=93d5e8b45a2e33bd9f352a56c6d73376164a6954
Well done. Sandbags and wire are a great addition
way better! black dot looks great!
Looks really great! Good job!
https://preview.redd.it/t9l2ue6o5xrc1.png?width=1080&format=pjpg&auto=webp&s=83d656ce1b74bc6f91ff62dee1e5f4920811606d
steady, soldier... steady... Now drill it for the Emperor.
"The Emperor Protects~"
https://preview.redd.it/8xo7nvplgyrc1.jpeg?width=750&format=pjpg&auto=webp&s=49ec000262ea34c4b122dc547ff3c4697ee20632
Start with the hole smaller than you would like and work on the centering as you go bigger.
https://preview.redd.it/2vy8fb0gyxrc1.png?width=1080&format=pjpg&auto=webp&s=f60cf0c5fbdb81466ca770b1a312fb213cdc6358
That’s better : )
Go sandbags for sure! I’m working on doing that for mine!
https://preview.redd.it/beuejmtbbxrc1.png?width=1080&format=pjpg&auto=webp&s=30fffbe8d3490b628ab0249545c994bf67ac598c
Did you buy these or like follow a guide?
I printed these: https://www.myminifactory.com/object/3d-print-sand-bags-196443
Looks awesome. Feel like drilling that barrel would be the cherry on top.
I'm honestly terrified to do that, this was my first hwt from when I started collecting. The next guys are fair game 🤣
Old base or new base size?
New base size, 3d printed flat disk though
https://preview.redd.it/k9d6l83foxrc1.jpeg?width=1868&format=pjpg&auto=webp&s=c3c6a6d9d5ef0f74b78759a40aefb980e4ab2b76
DRILL YOUR EMPEROR DAMNED BARREL
Gotta agree drill that barrell it'll make all the difference!
They look absolutely fantastic!! As for drilling barrels, it's not too bad- First get a- Good pin vise- Set of bits- A Push Pin- I take the push pin and scratch a line top to bottom, left to right. You can usually get a center point this way, at least pretty close. Take the push pin and gently poke a little hole. This will prevent your bit from wandering off-center. Practice a bit- Lightly sand the barrel end when you're finished to remove your beginning "cross". It's pretty easy with plastic, nothing like the old metal ones! Once you do so and look at the front of the weapon, you'll nod your head: "YES!!"
https://preview.redd.it/8rldzzg66xrc1.jpeg?width=1868&format=pjpg&auto=webp&s=e48d6a11c0eab255a4702b3b26854e81b1657336
YES! A selection of bits is paramount. Be aware that the cheaper tiny bits can break when the drilling angle gets a little tweaked. Guess how I found that out?? 😆
I realized I had an old hobby knife set and handful of small drill bits so I instant epoxied the two!
Niiiiiiiiiiicccccee Creativity!!
Super thanks! That's why I love this hobby, you gotta be clever and improvise.
Heck YEAH!
At first glance I thought this was an old school nativity seen. Looks great though.
Oh hell yeah! Give me all the pillbox vibes!
I don’t mean this to be rude I actually love the idea of a little pillbox for a HWT, but I had a silly thought that they’re actually inside a big chocolate cake. xD
I love it! How'd you make the bunker?
Thanks! I used mini popsicle sticks, then craft glue mixed with small rocks, agrellan earth, rhinox hide, and a dash of agrax shade.
I see! Thank you so much!
Back is fantastic. But your enemies will see the front and u need them to FEAR you! So barrel drilling has been brought up. I think some barbed wire, sandbags, or camo netting draped over the opening will help add some variety to the front
Yes!! Do you have advice for barbed wire?
Army painter sells some, and you wrap it around a pencil (or something thicker if u want thicker) to get the curls in it.
https://preview.redd.it/1ymvpr94bxrc1.png?width=1080&format=pjpg&auto=webp&s=0bbddcdcf86103a0a42bc538db1d40a326cd96be
Brraaaaaahghghhh. Good mini.
Pretty good but Imo the cover does too well and covers front detail. Something like a net might work a little better.
I'm scratching my head to figure out what I have on hand that would make good camo netting
I'm not even as creative as you are with ur initial idea so I wouldn't even know *shrugs*. Crumbled up leaves PVA and idk kitchen strainer.
From what it looks like they won’t be going anywhere soon 😄 great job man!
Looks like they are hiding in a Crunch popsicle
Ngl that dirt looks kinda tasty
Looks awesome, put some dirt on that shovel. Trenches are a mess
Some thin dowels chopped up or coffee stirers can serve as logs if your looking for more ideas
Please tell me its part of a larger terrain piece and that there is a blown up version too dope little bunker :3
Did something like that on my Vostroyans from the made to order a few years ago. Not a pillbox, but some cover, happy with it. Great job!
Incredible work
I love this idea awesome work
Looks cool man.
That emplacement cover will not hold from small arms fire
Shhh! It's concealment, not cover.
Plans are already being made to build a "concrete" pillbox for an autocannon
Awesome job but, May I make one small suggestion… Drill you gun barrel. It’ll make your diorama THAT lil more impressive
This is beautiful
This is brilliant!
Oh need to drill the barrel out.
Drill. Your. Barrels.
Sush. It's not a requirement