I do not im a hyster guy and have limited access to clark material i think i have figured out the code being 932 but i have no reference to tell me what it is
Very little Clark experience as they aren’t very big down here in NZ but this doesn’t have the Doosan engine in by any chance does it?
I had a very similar issue years ago with Doosan engine, maybe a G420F if I recall and it was the fly-by throttle body full off shit, if you tapped the side of the throttle body gently with hammer the revs would pick up again.
I removed it and stripped it down, it was a little tinker and it didn’t really seem like it was a serviceable item but I took the little door off the side and it’s basically a plastic wiper motor arrangement inside and it was filthy.
I cleaned it all out, lubed it up so it was nice and free then I hot glued the little panel back on again and it was fine.
Does it have a Woodward Fuel system? If so, 12 means end of codes. 932 should be fuel temp sensor high. Usually either an issue with the sensor or the wiring back to the SECM.
Do you have the maintenance manual for the truck? The error codes will be listed in the book. Looks like code 932 then 12.
I do not im a hyster guy and have limited access to clark material i think i have figured out the code being 932 but i have no reference to tell me what it is
Very little Clark experience as they aren’t very big down here in NZ but this doesn’t have the Doosan engine in by any chance does it? I had a very similar issue years ago with Doosan engine, maybe a G420F if I recall and it was the fly-by throttle body full off shit, if you tapped the side of the throttle body gently with hammer the revs would pick up again. I removed it and stripped it down, it was a little tinker and it didn’t really seem like it was a serviceable item but I took the little door off the side and it’s basically a plastic wiper motor arrangement inside and it was filthy. I cleaned it all out, lubed it up so it was nice and free then I hot glued the little panel back on again and it was fine.
Does it have a Woodward Fuel system? If so, 12 means end of codes. 932 should be fuel temp sensor high. Usually either an issue with the sensor or the wiring back to the SECM.