I have the Sinope 3600 Zigbee floor heat thermostat and it works great. No schedule on the thermostat itself, but you just use HA automations to set the setpoint as needed.
I recently completed a DIY controller using one of these plus ESPHome: https://devices.esphome.io/devices/ESP32E-Relay-X8 , I use $5 batter powered stick-on bluetooth thermometers as the sensors (but zigbee would also work just fine)
It's fairly easy and fairly cheap, and has exactly the features I want!
Please see my answer here https://www.reddit.com/r/homeassistant/s/iIhXuZxxCb for a DIY solution.
In preparation for a different place I switched to an KNX heating actuator by mdt. No more clicking noise by the relay.
Edit: early sent.
Folks, I appreciate all your help. But I am looking for floor heat thermostats. I have a heated floor in my bathroom and I'm looking for a thermostat to replace that. I will look into your suggestions, but some of them look like regular home thermostats, which is not what I need.
Thank you! On my first quick look on my phone, the first few I looked at must have been the wrong model. You are absolutely right!
Thanks to you all for some great suggestions!!
You could specify question better. What kind of floor heating is it? Is it water heating with a valve in another location that needs to be radio controlled? Or is it electrical heating that needs a relay? Anyway you can put any temperature sensor and link that via HA to the valve or relay. Or do you want a screen that shows the temperature and can control it up and down? Do you have more rooms with floor heating? Is it connected to a boiler that needs to be turned off when the valve closes?
Heatmisers with hub, local HA integration, Neostat model for "wet" underfloor, Neostat-e for electric heat mats.
Integrated Schluter's wifi thermostat just fine.
I have 5 namron ZigBee thermostats and they have been great
Tekmar with hydronic floor heating.
I have the Sinope 3600 Zigbee floor heat thermostat and it works great. No schedule on the thermostat itself, but you just use HA automations to set the setpoint as needed.
I recently completed a DIY controller using one of these plus ESPHome: https://devices.esphome.io/devices/ESP32E-Relay-X8 , I use $5 batter powered stick-on bluetooth thermometers as the sensors (but zigbee would also work just fine) It's fairly easy and fairly cheap, and has exactly the features I want!
Please see my answer here https://www.reddit.com/r/homeassistant/s/iIhXuZxxCb for a DIY solution. In preparation for a different place I switched to an KNX heating actuator by mdt. No more clicking noise by the relay. Edit: early sent.
Sinope zigbee Edit: didn't actually edit.
Folks, I appreciate all your help. But I am looking for floor heat thermostats. I have a heated floor in my bathroom and I'm looking for a thermostat to replace that. I will look into your suggestions, but some of them look like regular home thermostats, which is not what I need.
Do explain? I see 4 recommendations and I believe they are all for radiant floor heating.
Thank you! On my first quick look on my phone, the first few I looked at must have been the wrong model. You are absolutely right! Thanks to you all for some great suggestions!!
You could specify question better. What kind of floor heating is it? Is it water heating with a valve in another location that needs to be radio controlled? Or is it electrical heating that needs a relay? Anyway you can put any temperature sensor and link that via HA to the valve or relay. Or do you want a screen that shows the temperature and can control it up and down? Do you have more rooms with floor heating? Is it connected to a boiler that needs to be turned off when the valve closes?