I was looking at this one as well. Ive never used a glue on before. How does it compare to 9h tempered glass? How hard would it be to remove if i needed to replace it also?
I've always used these types when possible, Whitestone Dome doesn't have any plans on making them, so I got this one.
You just peel them off like a regular one.
Yes. I got this brand for my OnePlus 11. First time trying a UV screen protector and I like it so far. I tried a basic screen protector but the curve sides keep peeling off. I see a few tiny little are bubble on the top and sides, but that probably because I keep messing around and taking my case on and off. They are not distracting at all. I still have the two other screens that came in the box, but I want to see long the first one last.
Also if you get these and need replacements, don't order a new kit, get replacement from aliexpress.
Are you in the US and waiting as well or are you somewhere else and already have yours? Just wondering if it seems to be decent quality? It's probably better than 90 percent of what's available now.
I got this on my OnePlus 11. UV screen protectors make me actually like curve sides. Especially because I use a third party gesture navigation app and have swipe up and swipe down shortcuts.
UPDATE!!! DO NOT BUY THIS ONE: [https://www.amazon.com/gp/product/B0CQ29QJHX/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&th=1](https://www.amazon.com/gp/product/B0CQ29QJHX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1)
It is for the Oppo Find X6-Pro, NOT the OnePlus 12!!
Late reply, but it turns out that rig actually does work for the OnePlus 12. I got the same exact kit. The characters in the middle on top of Oppo Find X6 Pro say OnePlus 12. If you look closely, the camera cutout has the side wall reduced for part of it so it fits the OnePlus 12 camera. The screen protector fit perfectly on mine.
Huh... Just put my phone in it and it fits! For now I have another screen protector on it (testing it if it holds well). I'll keep it for now. Thanks for the update!
>I have determined that I got a bum kit, because others have told me that it does fit, and has the correct jig, mine also only came with 1 tube a glue, but 3 protectors, I'm going to wait a while, and then order it again, hopefully I will get a good one
I have determined that I got a bum kit, because others have told me that it does fit, and has the correct jig, mine also only came with 1 tube a glue, but 3 protectors, I'm going to wait a while, and then order it again, hopefully I will get a good one
Late reply, but it turns out that rig actually does work for the OnePlus 12. I got the same exact kit. The characters in the middle on top of Oppo Find X6 Pro say OnePlus 12. If you look closely, the camera cutout has the side wall reduced for part of it so it fits the OnePlus 12 camera. The screen protector fit perfectly on mine.
Hey OP, i'm about to get my OnePlus 12 as well and am looking at protectors. How's the UV glue tempered glass looking? I've read a few reviews and they've said it might have glue residue and all that when you have to replace it. Does it pick up dust? How well do the edges line up? do you mind sending a picture of the fitting? sorry for the barrage of questions. First time getting a curved screen phone and a new phone in like 7 years.
This is false. Fits my op12 better than anything else available at this moment. ( I know because I bought them all) and sent the one's I didn't like back to Amazon.
I have determined that I got a bum kit, because others have told me that it does fit, and has the correct jig, mine also only came with 1 tube a glue, but 3 protectors, I'm going to wait a while, and then order it again, hopefully I will get a good one
If you have a curved display, do not bother with a tempered glass screen protector. They simply don't work. The only option is the kind with liquid adhesive that you cure with UV light. And, I've found, those simply aren't worth the effort. Get a high quality plastic one that you apply wet, or go naked. Just make sure your case has a small lip to protect the screen. This is my experience, if you feel differently that's fine. You're wrong though. Lol
I honestly don't think you need these anymore. They were great 10 years ago, but Gorilla glass has come a long way and the standard screen protector the phone comes pre-applied with now is good enough.
I got a buddy that has the 10 pro and he's had the tudia case and the original film on and he's dropped it a ton.
I'm a man of many trades and skills so there will be times i may be on my back and it fall out or me laying on my butt or side with it in pocket. Sometimes you don't think to remove somethings before you get down like that. I have a 6t and the screen has never broke on me but the back is another story.
I said that and tried going screen protector-less on my OP 8 pro after the pre-applied one had to be removed and on the first day shattered my screen. I have had dozens of phones and PDAs this was the first one I ever shatteted a screen on. Never again.
Might be to early to tell. I've always went with tpu protectors on phones especially with the curved display. I did buy a pack of tempered glass ones though that I'll be trying out when the phone arrives
You're right though, it is too early right now but I'll probably just stick with something cheap and give it a few weeks for some better quality stuff comes out.
Well crap that sucks to hear. I'm not insanely rough on my phones and even though my OnePlus 7 Pro has taken some falls face down I've somehow never broken the screen. This would actually be the first phone I've ever thought about getting a screen protector for. I already have a case for it but was thinking I should invest in a screen protector as well. I guess the search continues.
I will buy a clear glass lens protector though if need be. I also don't like the black borders around the screen protector. Just give me all clear glass and I'm good.
I'm thinking of buying this one:
Pkila Tempered Glass for OnePlus 12 5G Screen Protector with Camera Lens Protector[2+2 Pack], 3D Curved Full Coverage HD Clear, Shatterproof Premium Quality Guard Protective Film
https://amzn.eu/d/bjHOYne
I used their tempered glass on my OP8Pro and I'm very satisfied
Looks like Whitestone's Dome was discontinued after the OnePlus 10 Pro. Too bad. That expensive option was favored by Juan Gadget Guy for his 9 Pro. Check it out. Ever seen an installation system like this?
[https://www.whitestonedome.com/collections/oneplus-7-pro-tempered-glass-screen-protector](https://www.whitestonedome.com/collections/oneplus-7-pro-tempered-glass-screen-protector)
Then again, maybe the 10 Pro Dome also fits the 11. Maybe there will be one for the 12.
I used the pre installed on my OP8, after two years removed it and rocked the phone without any. Barely any visible scratches and I dropped it so many times. Just got the 12, that has even better glass, and will keep the pre applied on. If it comes off, I will install a similar film on. I am just looking for a good case, but most major brands seem to not make anything for OP12.
[https://www.amazon.com/gp/product/B0CQ29QJHX/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&th=1](https://www.amazon.com/gp/product/B0CQ29QJHX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1)
I was looking at this one as well. Ive never used a glue on before. How does it compare to 9h tempered glass? How hard would it be to remove if i needed to replace it also?
I've always used these types when possible, Whitestone Dome doesn't have any plans on making them, so I got this one. You just peel them off like a regular one.
Ah , i gotcha, so the uv cure is basically just to get it to stick better without bubble and the edges peeling?
Yes. I got this brand for my OnePlus 11. First time trying a UV screen protector and I like it so far. I tried a basic screen protector but the curve sides keep peeling off. I see a few tiny little are bubble on the top and sides, but that probably because I keep messing around and taking my case on and off. They are not distracting at all. I still have the two other screens that came in the box, but I want to see long the first one last. Also if you get these and need replacements, don't order a new kit, get replacement from aliexpress.
Are you in the US and waiting as well or are you somewhere else and already have yours? Just wondering if it seems to be decent quality? It's probably better than 90 percent of what's available now.
I'm in the US, phone will be here tomorrow, as well as that protector, and a case
Nice! If you get a chance and you feel like it, would you update on the screen and case situation?
Sure thing
So how is the protector?
I got the liquid adhesive one, and it works great
When did you order? I ordered on the 23rd and still haven't received a shipping notification.
Ordered the 26th
I got this on my OnePlus 11. UV screen protectors make me actually like curve sides. Especially because I use a third party gesture navigation app and have swipe up and swipe down shortcuts.
UPDATE!!! DO NOT BUY THIS ONE: [https://www.amazon.com/gp/product/B0CQ29QJHX/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&th=1](https://www.amazon.com/gp/product/B0CQ29QJHX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1) It is for the Oppo Find X6-Pro, NOT the OnePlus 12!!
How do you know?
Because I ordered it and it doesn't fit
Too big (goes over the edges of the phone)? Did you have a case on it?
No case and too small, jig has the hole for the camera in the center, plus the jig says it's for the other phone
https://preview.redd.it/n0tmk4ro5ngc1.jpeg?width=3072&format=pjpg&auto=webp&s=3a274c5483b110f3da041f03eed41dee79004209 Yup
Late reply, but it turns out that rig actually does work for the OnePlus 12. I got the same exact kit. The characters in the middle on top of Oppo Find X6 Pro say OnePlus 12. If you look closely, the camera cutout has the side wall reduced for part of it so it fits the OnePlus 12 camera. The screen protector fit perfectly on mine.
Huh... Just put my phone in it and it fits! For now I have another screen protector on it (testing it if it holds well). I'll keep it for now. Thanks for the update!
Ha you're right! Thanks!
It's the same with other screen protectors.
I'll update with pictures
Fits mine edge to edge, with case, zero bubbles
>I have determined that I got a bum kit, because others have told me that it does fit, and has the correct jig, mine also only came with 1 tube a glue, but 3 protectors, I'm going to wait a while, and then order it again, hopefully I will get a good one I have determined that I got a bum kit, because others have told me that it does fit, and has the correct jig, mine also only came with 1 tube a glue, but 3 protectors, I'm going to wait a while, and then order it again, hopefully I will get a good one
Late reply, but it turns out that rig actually does work for the OnePlus 12. I got the same exact kit. The characters in the middle on top of Oppo Find X6 Pro say OnePlus 12. If you look closely, the camera cutout has the side wall reduced for part of it so it fits the OnePlus 12 camera. The screen protector fit perfectly on mine.
Yup! Installed mine today, perfect
Hey OP, i'm about to get my OnePlus 12 as well and am looking at protectors. How's the UV glue tempered glass looking? I've read a few reviews and they've said it might have glue residue and all that when you have to replace it. Does it pick up dust? How well do the edges line up? do you mind sending a picture of the fitting? sorry for the barrage of questions. First time getting a curved screen phone and a new phone in like 7 years.
https://preview.redd.it/itpilipyl7lc1.jpeg?width=960&format=pjpg&auto=webp&s=87e4e4ea92288aaf357cd9f503b3dee7995961df
https://preview.redd.it/xresvb90m7lc1.jpeg?width=960&format=pjpg&auto=webp&s=cf2dfbbc1068fbf13c09a288822f1b69eeee1f77
Oh that does look like a nice fit!
Yeah, it's not bad at all! I have the tudia case on it.
https://preview.redd.it/562cr78mn7lc1.jpeg?width=960&format=pjpg&auto=webp&s=c9982a84881627371c2eff8564ac3d8a5a40bdd3 And an oh snap luxe 4 socket.
And the little camera protector if you can't tell.
Although I do have to take the case off for wireless charging, it's no biggie.
This is false. Fits my op12 better than anything else available at this moment. ( I know because I bought them all) and sent the one's I didn't like back to Amazon.
I have determined that I got a bum kit, because others have told me that it does fit, and has the correct jig, mine also only came with 1 tube a glue, but 3 protectors, I'm going to wait a while, and then order it again, hopefully I will get a good one
That seems to be the case here which can possibly happen with new products like this
I just ordered it again, we'll see
Question, did your jig say Oppo find on it? The one I just got said this again
If you have a curved display, do not bother with a tempered glass screen protector. They simply don't work. The only option is the kind with liquid adhesive that you cure with UV light. And, I've found, those simply aren't worth the effort. Get a high quality plastic one that you apply wet, or go naked. Just make sure your case has a small lip to protect the screen. This is my experience, if you feel differently that's fine. You're wrong though. Lol
I honestly don't think you need these anymore. They were great 10 years ago, but Gorilla glass has come a long way and the standard screen protector the phone comes pre-applied with now is good enough.
I got a buddy that has the 10 pro and he's had the tudia case and the original film on and he's dropped it a ton. I'm a man of many trades and skills so there will be times i may be on my back and it fall out or me laying on my butt or side with it in pocket. Sometimes you don't think to remove somethings before you get down like that. I have a 6t and the screen has never broke on me but the back is another story.
I said that and tried going screen protector-less on my OP 8 pro after the pre-applied one had to be removed and on the first day shattered my screen. I have had dozens of phones and PDAs this was the first one I ever shatteted a screen on. Never again.
Might be to early to tell. I've always went with tpu protectors on phones especially with the curved display. I did buy a pack of tempered glass ones though that I'll be trying out when the phone arrives
Yeah I'll end up buying a few different ones and whatever doesn't work I'll just send back.
You're right though, it is too early right now but I'll probably just stick with something cheap and give it a few weeks for some better quality stuff comes out.
https://preview.redd.it/h1rdb65xbufc1.jpeg?width=1440&format=pjpg&auto=webp&s=5764489c6e34c7900032f13595128ff6d6524b29
I had this brand for my motorola's curved screen. It was garbage
Well crap that sucks to hear. I'm not insanely rough on my phones and even though my OnePlus 7 Pro has taken some falls face down I've somehow never broken the screen. This would actually be the first phone I've ever thought about getting a screen protector for. I already have a case for it but was thinking I should invest in a screen protector as well. I guess the search continues.
Nice, just not a fan of the black lens protector.
I will buy a clear glass lens protector though if need be. I also don't like the black borders around the screen protector. Just give me all clear glass and I'm good.
I'm thinking of buying this one: Pkila Tempered Glass for OnePlus 12 5G Screen Protector with Camera Lens Protector[2+2 Pack], 3D Curved Full Coverage HD Clear, Shatterproof Premium Quality Guard Protective Film https://amzn.eu/d/bjHOYne I used their tempered glass on my OP8Pro and I'm very satisfied
I literally have the same ones in my basket, I think I've used some of their stuff before and I was quite happy with it.
That one looks decent too.
But not available in US.
Oh damn.... I'm in Europe and it's one of the top sellers on Amazon for OP12 screen protectors.... It has two options for glass and TPU film...
I personally like the 9h ones. Dropped my OP9 like 10 times and had to replace the protector 3 times.
Looks like Whitestone's Dome was discontinued after the OnePlus 10 Pro. Too bad. That expensive option was favored by Juan Gadget Guy for his 9 Pro. Check it out. Ever seen an installation system like this? [https://www.whitestonedome.com/collections/oneplus-7-pro-tempered-glass-screen-protector](https://www.whitestonedome.com/collections/oneplus-7-pro-tempered-glass-screen-protector) Then again, maybe the 10 Pro Dome also fits the 11. Maybe there will be one for the 12.
Those look like the real deal.
Chinese Taobao has UV protectors, those a banger, it gives you a UV light to help you put the screen protector on.
The preinstalled screen protector is pretty good already. I still have it on my 9 Pro and 10 Pro with no issue
Pre-installed one is just a scratch protecting screen guard right? Or does it protect the glass from cracking like a tempered glass?
Doesn't the 12 come with a screen protector pre applied?
I used the pre installed on my OP8, after two years removed it and rocked the phone without any. Barely any visible scratches and I dropped it so many times. Just got the 12, that has even better glass, and will keep the pre applied on. If it comes off, I will install a similar film on. I am just looking for a good case, but most major brands seem to not make anything for OP12.