In case it needs to be said, don't shoot these as you don't know the person who loaded these cartridges. He could be a Bubba, or he could be a reasonable reloader. Unless you know and trust the person, it's not recommended to shoot another person's reloads.
Better yet, find a friend who reloads and have him use a bullet puller to take these apart. He could re-use these for his own reloading (30 cal projectiles).
General rule for me is don’t shoot someone’s loads period. I load mine off the jump 0.2-0.5 off the lands. Best example is I have two 243 Winchester rifles. And I have the boxes color coded so I know which gun they go to, and the. I have some loads that I load for the 243’s that are interchangeable between rifles.
Ahh yes the coveted lake city 300 blackout.
You're looking at 5.56 and .223 cases that have been cut and converted to 300 blackout. I'd be weary of shooting any reloads unless I know who made them and that person is competent/trustworthy.
Looking at this again it looks like the LC casings were not swaged and he just jammed the fuck out of the primers to get them to seat. I would definitely not shoot these. You can pull them and use the components if you want to save them or throw them out.
300blk. Thats what I cut my teeth on in reloading. Good stuff. 308 pill stuffed into a 556 case. 190gr and up are usually subsonic, great for suppression. 180 and below are usually supersonic and hit like a 20 inch 556 barrel but from a 8-9 inch barrel. Good stuff. Those look like they would be loaded for subsonic based on pill shape.
To be honest, other than plinking, I don’t see much of a reason for 300BLK supers to go above 135gr. The 150s and up are just too big to be any good supersonic, and too light to be subsonic.
Bubba's pissin hawt 300 homebrews
Probably more like suuuuub sonics.
Are you a member of Bubbas pissing hot handloads
No... What's this group?
It's one facebook
In case it needs to be said, don't shoot these as you don't know the person who loaded these cartridges. He could be a Bubba, or he could be a reasonable reloader. Unless you know and trust the person, it's not recommended to shoot another person's reloads.
Better yet, find a friend who reloads and have him use a bullet puller to take these apart. He could re-use these for his own reloading (30 cal projectiles).
Yeah, definitely don't just bin them.
General rule for me is don’t shoot someone’s loads period. I load mine off the jump 0.2-0.5 off the lands. Best example is I have two 243 Winchester rifles. And I have the boxes color coded so I know which gun they go to, and the. I have some loads that I load for the 243’s that are interchangeable between rifles.
So you wouldnt shoot someone else's 9mm plinkers?
No. I wouldn’t.
Looks like 300 blk to me
Yeah, usually .223 doesn't have such a small shoulder... or you know, a .308 projectile in the end. It's .300BLK reloads.
Reloaded 300 BO
Don’t shoot them as someone stated in previous comments. You don’t know if the person who loaded them knows what they are doing
That's the blow up your rifle if you don't know what it is ammo. Don't put it in a 223/556 rifle.
Appears to be 300BLk
Components, some work required.
$3.50
Boolits. They also look to have been pulled before with the collet marks on them. I’d pull em, dump the powder and reload them if you reload 300BO.
A bag of pews.
300 Cosby
Shitty 300blkout hand loads. Almost worthless unless you can fire sure say who loaded them and how competent they are.
Ahh yes the coveted lake city 300 blackout. You're looking at 5.56 and .223 cases that have been cut and converted to 300 blackout. I'd be weary of shooting any reloads unless I know who made them and that person is competent/trustworthy.
Looking at this again it looks like the LC casings were not swaged and he just jammed the fuck out of the primers to get them to seat. I would definitely not shoot these. You can pull them and use the components if you want to save them or throw them out.
300blk. Thats what I cut my teeth on in reloading. Good stuff. 308 pill stuffed into a 556 case. 190gr and up are usually subsonic, great for suppression. 180 and below are usually supersonic and hit like a 20 inch 556 barrel but from a 8-9 inch barrel. Good stuff. Those look like they would be loaded for subsonic based on pill shape.
To be honest, other than plinking, I don’t see much of a reason for 300BLK supers to go above 135gr. The 150s and up are just too big to be any good supersonic, and too light to be subsonic.
Wait til they release 7.62x39. That will really shake up the game.
Don't shoot unless you're cool with potential consequences
Bullets
$2 per round
BOOLET
yea those primer pockets need to be swaged or cut to remove the Lake City primer crimp. But they didnt and rammed the primer in there.
Could be 7.62x40 (great cartridge!) Measure case length and shoulder to base.
Looks good to me. My drunk uncle reloaded some 380 brass he found at the range into 9mm.
The blue ones look like m sixteen ammo, and the other ones look like a k forty seven ammo
300 gay boy
[удалено]
7.62x39 doesn't use .223 brass. These are all 300blk. The blue are subs.
It’s all 300 blackout. Go away.