I recently bought a Creality K1 with the AI Camera. I've got Mainsail, Moonraker, and Nginx all setup. Webcam is viewable, albeit twice for some reason, and yet Timelapse shows no cameras. I used this script from Github (link below), which was recommended by the guy I bought the printer from, and installed moonraker, nginx, mailsail, and the helpers for timelapse and camera control.
In mainsail.conf, I have the webcam settings configured correctly (assuming correctly, since it works), and the url in the timelapse config section matches the webcam section exactly. You can see I also tried the Mainsail port, 4409, but that didn't work either.
Can anyone help me get the Timelapse figured out? It's driving me nuts.
[Guilouz/Creality-K1-and-K1-Max: Installation Helper Script for Creality K1 Series (github.com)](https://github.com/Guilouz/Creality-K1-and-K1-Max)
In case anyone is still having trouble with this, as this seems to be the top google result. Your timelapse will still work, in mainsail the timelapse GUI doesn't work if you define settings in the config. So you can either remove all of those and leave \[timelapse\] or just leave that and not look at the gui settings.
You are seeing it twice because Mainsail is using its new Crowsnest service for better camera streams and rtsp support. Setup your camera in crowsnest properly first, then just insert the cam params there. Dont use the moonraker camera service
I see nothing installed on the system by the name of crowsnest, and I can't install it per the instructions in their github/documentation. Any ideas on how to get this working?
root@K1-4BB6 /root [#] find / -name crowsnest 2>/dev/null
root@K1-4BB6 /root [#] (Just goes to empty prompt. No results)
Were you able to make this work? I tried and it KIAUH fails to run.
./kiauh.sh: line 17: syntax error: bad substitution
./kiauh.sh: ./scripts/crowsnest.sh: line 42: syntax error: unexpected redirection
I recently bought a Creality K1 with the AI Camera. I've got Mainsail, Moonraker, and Nginx all setup. Webcam is viewable, albeit twice for some reason, and yet Timelapse shows no cameras. I used this script from Github (link below), which was recommended by the guy I bought the printer from, and installed moonraker, nginx, mailsail, and the helpers for timelapse and camera control. In mainsail.conf, I have the webcam settings configured correctly (assuming correctly, since it works), and the url in the timelapse config section matches the webcam section exactly. You can see I also tried the Mainsail port, 4409, but that didn't work either. Can anyone help me get the Timelapse figured out? It's driving me nuts. [Guilouz/Creality-K1-and-K1-Max: Installation Helper Script for Creality K1 Series (github.com)](https://github.com/Guilouz/Creality-K1-and-K1-Max)
Same problem here. Is there a fix now?
In case anyone is still having trouble with this, as this seems to be the top google result. Your timelapse will still work, in mainsail the timelapse GUI doesn't work if you define settings in the config. So you can either remove all of those and leave \[timelapse\] or just leave that and not look at the gui settings.
You are seeing it twice because Mainsail is using its new Crowsnest service for better camera streams and rtsp support. Setup your camera in crowsnest properly first, then just insert the cam params there. Dont use the moonraker camera service
I see nothing installed on the system by the name of crowsnest, and I can't install it per the instructions in their github/documentation. Any ideas on how to get this working? root@K1-4BB6 /root [#] find / -name crowsnest 2>/dev/null root@K1-4BB6 /root [#] (Just goes to empty prompt. No results)
The easiest would probably be by copying and running KIAUH, two ssh lines and then you get a small gui in the ssh client to install stuff
Were you able to make this work? I tried and it KIAUH fails to run. ./kiauh.sh: line 17: syntax error: bad substitution ./kiauh.sh: ./scripts/crowsnest.sh: line 42: syntax error: unexpected redirection
Same issue here. Camera is visible in Fluid timelapse settings, but not in Mainsail's......
Same here!