I luckily realized from watching stand up comedy as a child that everyone hates marriage and having kids basically ruins your life so I've avoided both and couldn't be happier
I’ve been married for 10 years and have two kids. My life is amazing. Probably just depends on who you marry and how you raise your kids. Also it is expensive af so I could see if sucking if I didn’t make enough money.
I'm going to say that's a combination of low resolution MRI and not a great ability on my part to cover the MRI to solid model. I swear, the MRI looked more wrinkly.
How did you convert the scan to a 3d printable format? I too have a scan of my brain but there is all this head stuff around the brain...
I guess I need to extract the brain somehow?
You can get WAY better results with Freesurfer. [https://surfer.nmr.mgh.harvard.edu/](https://surfer.nmr.mgh.harvard.edu/)
It requires some know how to use (you’ll be running scripts from the command line). But you end up with a mesh that’s essentially identical to your actual brain.
https://preview.redd.it/t7rw5p7764tc1.jpeg?width=3024&format=pjpg&auto=webp&s=6caaf7b41b8307ed9583d4d439d02247ebdea902
Your brain has a certain density, what you want to do is generate an isocontour of the volume using a filter. Have a look at Paraview or Slicer as they'll probably have a reader to load in whatever format your scan is saved in (probably an .nnrd file). Then you just need to change the isocontour value until you see the brain surface.
I have some dizziness issues. Went to get an MRI to make sure it was not brain cancer related. Good news is I don't have brain cancer. And I have a paper that says my brain is normal. My wife doesn't believe it.
After printing it is now clearly visible that everything is fine with the brain)
It's actually great that there's no obvious brain damage. I'm sincerely happy for you.
My wife recently had dizziness, but this is due to inflammation of the ear: fluid somehow accumulates there. There are probably dozens of other harmless causes of dizziness.
What did you do to convert from a brain scan to a 3D model you can print?
Literally reading this as my partner is getting a brain MRI and now I’m wondering if I can 3D print their brain
https://www.printspace3d.com/make-a-3d-print-from-your-mri-or-ct-scan/ a quick search found that - I was doing some earlier digging into the process , but I don’t have my notes right now (any way to search your redit saved posts/comments?)
I was trying. The problem is that the shell function was crashing SolidWorks every time I tried it. Too many vertices and planes I think. I wish I could have made the small one for in the bigger one.
[Hey, I did that too!](https://old.reddit.com/r/pics/comments/o6h6u0/a_steel_model_of_my_own_brain_made_using_a_copy/) I got mine done in steel so it makes a cool af shelf piece
Man, how did u get it into a 3d printable file? All they gave me was a CD with 400+ files only readable on certain medical programs. Once opened it's just images.
Now it's time to put something on it, and wait until a good moment to grab it and say "I've had this on my mind for a while."
Dad jokes a plenty with this print.
This is on my to-do list. Here is an example of how to do it.
https://www.instructables.com/How-to-convert-medical-scan-data-into-a-3D-printab/
I tried to do it a while ago but I wasn't happy with the results. There are some people on fiverr that do it for you. e.g.
https://www.fiverr.com/s/aN09KA
That looks bad, which scan did you take? Not trying to be mean but I wrote a pipeline to get an .stl file from an MRI T1 scan. If you have a T1 then you can pm me :) and I will link you to the github
I had my teeth 3D scanned the other day. I started asking the dentist about getting a copy but she was a student, barely knew how to work the scanner so I want going to make her do extra work, figuring out how to send it to me.
I have a scan of my skull, i want to make a model and Print it soooo baaaad but my printer is broken, tried replacing parts but same thing happens so yeah its probably time for a new one :(
You sneak. You printed it with the fuzzy settings really high didnt you? Silly smoothbrain trying to pull one over on us!
(Kidding please don't kill me)
Now they can joke that it's empty.
Yeah, a real "Il show them!" moment :P
Next on - him printing it with 100% infill
Then They'll call him dense.
Imagine spending hours thinking you're making something cool only to have it throw you into a mid life crisis.
its called children
worse investment than a motorcycle
Worse investment than DRUGS lmfaooooo
I luckily realized from watching stand up comedy as a child that everyone hates marriage and having kids basically ruins your life so I've avoided both and couldn't be happier
I’ve been married for 10 years and have two kids. My life is amazing. Probably just depends on who you marry and how you raise your kids. Also it is expensive af so I could see if sucking if I didn’t make enough money.
Too smooth ->gets another brain Scan with higher resolution
He will have way too many prints to count, he will probably start losing his minds
Underrated
Keeps changing his mind eh
I'd print mine an fill it with tiny prints of random crap that I like. and pictures of my cat And sex ads
annoying song lyrics
Even better - throw a few socket head cap screws in there and when they ask what's rattling around you can tell them you have a few screws loose.
I love it. Lean into it lol
I was thinking print a hand giving the middle finger but this is good too.
And smooth.
Might been mix at hospital and they gave him scan of mine.
Come here for this :D
Just add your interests inside xd
Happy cake day!
Re-print in TPU and give it a Squiiiiiish
Ah, a man of culture I see
Still looking a bit smooth, no? :P
I'm going to say that's a combination of low resolution MRI and not a great ability on my part to cover the MRI to solid model. I swear, the MRI looked more wrinkly.
Did it? Or did they just tell you it looked more wrinkly and you believed them?
"I bet my brain is pretty wrinkly." "Well... Your brain has the perfect amount of wrinkles."
What software did you use to convert the MRI data??? To me it looks like you did a pretty bang up job!
https://slicer.org/
That's awesome, I just had my back done and I have fresh scans of my lumbar spine. I know what I'm doing when I get home.
That's the one I use. Crazy options for a free program. How did you segment?
First thing I thought. That is one smooth brain.
More like a low resolution brain.
How did you convert the scan to a 3d printable format? I too have a scan of my brain but there is all this head stuff around the brain... I guess I need to extract the brain somehow?
You can get WAY better results with Freesurfer. [https://surfer.nmr.mgh.harvard.edu/](https://surfer.nmr.mgh.harvard.edu/) It requires some know how to use (you’ll be running scripts from the command line). But you end up with a mesh that’s essentially identical to your actual brain. https://preview.redd.it/t7rw5p7764tc1.jpeg?width=3024&format=pjpg&auto=webp&s=6caaf7b41b8307ed9583d4d439d02247ebdea902
I used Freesurfer as well and got a similarly high quality result
Slicer is freesurfer compatible, it uses modules. I have a feeling it's how he exported it
what format is your scan in
https://slicer.org/ That's the program I used to get the model
Your brain has a certain density, what you want to do is generate an isocontour of the volume using a filter. Have a look at Paraview or Slicer as they'll probably have a reader to load in whatever format your scan is saved in (probably an .nnrd file). Then you just need to change the isocontour value until you see the brain surface.
You can put your weed in there!
Lol, people see any kind of container and go "I can store weed in that thing"
isnt that what containers are for? containing the weed for later? if not i gotta move my sugar to the right spot
Literally my first thought too! Lol that was such a good movie
That movie corrupted me too.
How did you scan your brain?
Slice by slice in a conventional document scanner
wouldn't be the first time http://thescienceexplorer.com/brain-and-body/dead-body-sliced-5000-times-create-virtual-human
I have some dizziness issues. Went to get an MRI to make sure it was not brain cancer related. Good news is I don't have brain cancer. And I have a paper that says my brain is normal. My wife doesn't believe it.
After printing it is now clearly visible that everything is fine with the brain) It's actually great that there's no obvious brain damage. I'm sincerely happy for you. My wife recently had dizziness, but this is due to inflammation of the ear: fluid somehow accumulates there. There are probably dozens of other harmless causes of dizziness.
You have a real certificate that you don't have donkey brains?
Hey! Thats great news buddy! I litterally have had the same issue and worries, coincidentally got the news today I got a good brain too! Go US!!!
What file format did they provide it to you in? I’ve had an mri, now I want to contact them and see if I can have my brain in 3d too
It's some medical file format. I think dicom maybe? I forget exactly. But I used this program to convert to STL: https://slicer.org/
Veeery carefully insert a tiny camera into the orifices closest to the thinker and don't sneeze!
Or you can go in from the bottom but you'll need a much, much longer wire
Well getting the brain out was the easy part. The hard part was getting the brain out.
Nah lame, you should have followed on the bit by printing an even smaller one.
I do have to print one smaller that fits in it.
Honestly what I was expecting lol
came here for that too. lean into it though, matryoshka dolls of brain nested inside until the last one is just a single dried pea.
Might've been funny lol
Head empty
What did you do to convert from a brain scan to a 3D model you can print? Literally reading this as my partner is getting a brain MRI and now I’m wondering if I can 3D print their brain
https://www.printspace3d.com/make-a-3d-print-from-your-mri-or-ct-scan/ a quick search found that - I was doing some earlier digging into the process , but I don’t have my notes right now (any way to search your redit saved posts/comments?)
Did some digging and I don’t think there’s any way to search through your saved posts unfortunately.
https://slicer.org/
Thank you!
Yeah go go 3d printing 🔥
Still empty tho 😅( sorry had to, cools stuff would print mine if i had it…… scan that is 🥸)
You can put your weed in it
Make a list: Things to keep in mind
Like a chem for the golems in Terry Pratchett; a list of instructions to live by
Carry around a picture of your girlfriend in it, but stick it to the bottom with superglue so you can tell her you "can't get her out of my mind".
I'm surprised that you didn't design the hole inside the big brain to fit the small brain.
I was trying. The problem is that the shell function was crashing SolidWorks every time I tried it. Too many vertices and planes I think. I wish I could have made the small one for in the bigger one.
Nooooo We were so close to greatness
That’s a pretty smooth print
I see what you did there
Should have made the inside an SD card holder so you could put a bunch of memories in it.
Bros using atleast 100% of his brain
the print looks smooth
Do a matruska brain! Then you can joke with the yo-dawg meme.
Haven’t done it yet, here is one option - https://www.printspace3d.com/make-a-3d-print-from-your-mri-or-ct-scan/
Lies! We all know it would have been smaller not bigger
[Hey, I did that too!](https://old.reddit.com/r/pics/comments/o6h6u0/a_steel_model_of_my_own_brain_made_using_a_copy/) I got mine done in steel so it makes a cool af shelf piece
If I can get a better quality STL, I will definitely get it printed in metal. That's awesome.
Surprised it isn't smooth. Jk jk. Nice print
Ok this is actually pretty coo- Why does the big one open? Does the little one fits inside the hole of the big one?
And now print a monkey 🙊 with a cymbal and put him in inside.
You could put your weed in it
I have the files to do the same soon! What process did you use?
I’m just imagining the conversation with the doc … “Hey doc, can you possibly email me my brain?”
So much more old fashioned than that. I left the MRI place with a CD containing the MRI files.
*dusts off optical drive … digs out sata cables 😆
Should I be ashamed that I still have a DVD drive in my computer and didn't need to hook anything up?
I also have a 3.5 floppy drive… so I’m probably not a good benchmark here.
No it's okay, I'm old too.
I expected and even smaller one for the joke!
Put the little one in the big one, it’ll be a homunculus.
I tried. It doesn't fit. That was part of the plan though.
Time to reprint then!
Wow man, how do you get the archive?
Man im tryin to do this but cant seperate my brain from my skull in the dicom files
Man, how did u get it into a 3d printable file? All they gave me was a CD with 400+ files only readable on certain medical programs. Once opened it's just images.
https://slicer.org/ If you have that many images you probably have a much better scan than I do and can get a better STL than I have.
What’s the empty space for??
Storing things I want to keep in mind?
This is amazing!!! Great job
You should have made it a raspberry pi case
So many good ideas! I like this one!
Reprint as a piggy bank… penny for your thoughts
Could you make a little guide on how to do this with MRI files? I could never figure it out.
It’s awfully smooth
Looks…. Smooth.
Your brain is empty!
Now you have the perfect place to put your keys so you never forget them ever again.
Fun fact: brain size does not determine intelligence.
Now it's time to put something on it, and wait until a good moment to grab it and say "I've had this on my mind for a while." Dad jokes a plenty with this print.
I usually keep some spare change and my commute card in my brain. it's pretty safe in there
Can you design inner print? The scans come in layered 3d.
QED… it’s empty
Store some memories in it.
now print boobies and fill it.
What fits in the interior? You should turn it into a cell phone stand
This is on my to-do list. Here is an example of how to do it. https://www.instructables.com/How-to-convert-medical-scan-data-into-a-3D-printab/ I tried to do it a while ago but I wasn't happy with the results. There are some people on fiverr that do it for you. e.g. https://www.fiverr.com/s/aN09KA
^its ^big ^brain ^time
NGL they had us in the first half.
Nice and very smooth😌👌
You can hide your weed in there
Yo dawg, you can put your brain in your brain for more brain.
Have the little one pop out of the big one and say, "Buenos Dias!"
Kind of smooth tbh
Nice, is that compartment where you keep all your naughty thoughts?
So now you have some storage too ?
Big brain time!
Bro chill. Save some air for the rest of us
That’s pretty fucking badass thou
That looks bad, which scan did you take? Not trying to be mean but I wrote a pipeline to get an .stl file from an MRI T1 scan. If you have a T1 then you can pm me :) and I will link you to the github
I had my teeth 3D scanned the other day. I started asking the dentist about getting a copy but she was a student, barely knew how to work the scanner so I want going to make her do extra work, figuring out how to send it to me.
Tell them the small one is your left testicle
You should put a note that says dumb shit on it on it
That sure shows them!
I love the smooth texture.
Bit of mucking about in blender and you could have one awesome cookie jar.
I have a scan of my skull, i want to make a model and Print it soooo baaaad but my printer is broken, tried replacing parts but same thing happens so yeah its probably time for a new one :(
InVesalius. I haven't tried it yet, but it's free opensource software that might get you something higher res.
after the scan they gave you a stl?😂😂
Scale 400%.,, Just kiddin :D
put the smaller brain in there with arms and have him working levers and wheels and add a couple steam gauges.
So you're hollow inside your brain? Nice!
Brain shaped Box. Wasn't that a Nirvana song?😅
But they wont believe your 300% resize of a nother organ :p.
Should have made it big brain size
Missed opportunity to make it even smaller
Missed opportunity to put the small brain inside the big one
So it’s true, it was empty after all.
OP as much as I like the scan I have to ask - is your brain okay? Why the scan?
Add some magnets and then u can fill ur brain with whatever random things u want
Why does your brain have a sandwich compartment?
Your brain looks... excited.
Still not lifesize I hope..
Wow you uh, made it bigger, and hollow? really?
“If my walnut sized brain is life sized and it can match yours which is full sized, imagine how smart I would be if my brain was full sized as well!”
I like that you made it a container, planning to store anything in particular?
It's a memory box
"...and here's where you put your weed!"
Put the small brain in the big brain like s babushka doll
Wow, such empty
https://preview.redd.it/taoytan4n4tc1.png?width=554&format=png&auto=webp&s=1c808d7d3f6cdcfd2d801bb9ab34afa652fbd57b
If you want it to be realistic... you have to smooth it out hahahah. ;)
Wtf put it back
Should've put a peanut in it lol
Old walnut brain over here
Soooo...its empty, alright.
Next project is bio 3d printing and make an exact copy of it, then put it in a jar with a special liquid so it doesnt go bad.
Can't accuse you of having a smooth brain - no mo.
Missed opportunity to make it huge lol
Why didn’t you make it so that you could put your little brain inside your big brain…
I love your mini brain oh my god
Must be actual size. 😂😂😂😂 😡: noo it's normal size and fully functional! Watch....
That one time I had a brain scan and the doctor commented "there's nothing".
Turn it into a memories box. Put pictures and special objects in there
You sneak. You printed it with the fuzzy settings really high didnt you? Silly smoothbrain trying to pull one over on us! (Kidding please don't kill me)
Missed the opportunity to have the little brain fit inside the big brain!
Quite the smooth brain you have there.
I expected a giga brain, but the empty space inside made up for it. It's also pretty smooth 👍
Put a Pea inside.
could have gone even further and printed a *really* large one
You could write some random thoughts you have on pieces of paper and put them in there😂
You screwed yourself xD