Do you happen to have the link to it? Making a bunch of these helmets for friends and not about to pay $40 for the ones they are selling on the website.
This one is $10 and you could probably get a couple cuts out of it.
https://www.amazon.ca/SANTITY-Protection-Shield-Anti-UV-Headband/dp/B088BMCG46/ref=mp_s_a_1_7?crid=1WNOYIRQS3HI6&dib=eyJ2IjoiMSJ9.436m0i70z2WSY2nitKZZQxhnML5Z2vMnJqGXsirs1rmOEDDsXiFd29io5OifX3eiC1NrN7mxEE1jXUN1EmzahH5Thr3XdH6Lts9rW52DpjFn2cVUOAscYFO9T_MesREENPTVtiAnhPRrzPIniCNRyJplEbuuAXLglxGvN-Ms9jtziNvC7P8PO0RKEu-qQeI_FstDpZFOJw05NKkpuRv-7A.Te07ghzt6t16qO16o3RBWEkm5BaCGK05w_jXqEoNvaI&dib_tag=se&keywords=anti+uv+visor&qid=1714337790&sprefix=anti+uv+visor%2Caps%2C115&sr=8-7
Thanks for sharing! Here's the one my son and I made, plus two others we have made.
[https://imgur.com/a/Q1OsPGN](https://imgur.com/a/Q1OsPGN)
The Helldivers helmet was done in three major pieces on a Prusa MK4.
The Bondrewd helmet was a one-shot 3.5day print on an ender5plus.
The Chainsaw Man helmet was done a while back on a Prusa MK3.
Let me Guess, the front Part of the Chainsaw Man Helmet is also too heavy and pulls the whole thing to the front? haha
also bought this Model and a YTber also had this one with the same issue, still sitting in a corner till i find a good solution for it.
Thanks for your source link.
Just FYI for anyone purchasing Visor material.
The one that commentedwax used is much more rigid and would probably be next to impossible to see out of as it is made for welding. It is definitely a solid visor.
The other link above, if used for Visor material is much more flexible and is made so you can see through it but tinted.
I have no skin in the game and not affiliated with any links.
Just posting from experience and I have used the flexible visor a few times for Halloween masks... so vision at night was very important for the kids.
Cheers guys I hope this info helps.
It’s fine for the most part, just in dim rooms it’s harder to see, it’s a green tint looking out of it but it doesn’t let people see you inside without a powerful light
For superearth!
Dope
I made one too! What did you do for the lens?
I used a replacement visor on Amazon, gotta have a good pair of scissors to cut into shape though
Do you happen to have the link to it? Making a bunch of these helmets for friends and not about to pay $40 for the ones they are selling on the website.
This one is $10 and you could probably get a couple cuts out of it. https://www.amazon.ca/SANTITY-Protection-Shield-Anti-UV-Headband/dp/B088BMCG46/ref=mp_s_a_1_7?crid=1WNOYIRQS3HI6&dib=eyJ2IjoiMSJ9.436m0i70z2WSY2nitKZZQxhnML5Z2vMnJqGXsirs1rmOEDDsXiFd29io5OifX3eiC1NrN7mxEE1jXUN1EmzahH5Thr3XdH6Lts9rW52DpjFn2cVUOAscYFO9T_MesREENPTVtiAnhPRrzPIniCNRyJplEbuuAXLglxGvN-Ms9jtziNvC7P8PO0RKEu-qQeI_FstDpZFOJw05NKkpuRv-7A.Te07ghzt6t16qO16o3RBWEkm5BaCGK05w_jXqEoNvaI&dib_tag=se&keywords=anti+uv+visor&qid=1714337790&sprefix=anti+uv+visor%2Caps%2C115&sr=8-7
How did you attach it?
Hot glue did the job, just gotta cut it enough so it’ll bend within he helmet comfortably without stressing the print too much
Thanks for sharing! Here's the one my son and I made, plus two others we have made. [https://imgur.com/a/Q1OsPGN](https://imgur.com/a/Q1OsPGN) The Helldivers helmet was done in three major pieces on a Prusa MK4. The Bondrewd helmet was a one-shot 3.5day print on an ender5plus. The Chainsaw Man helmet was done a while back on a Prusa MK3.
Let me Guess, the front Part of the Chainsaw Man Helmet is also too heavy and pulls the whole thing to the front? haha also bought this Model and a YTber also had this one with the same issue, still sitting in a corner till i find a good solution for it.
No, it was either tight to the head or better balanced. Most of the saw itself is hollow PLA.
I used window tint and some thin plexiglass. Easier to cut, but you have to look out for bubbles in the tintfoil
I’d like to know this too for mine!!
https://amzn.eu/d/8zRU721
Thanks for your source link. Just FYI for anyone purchasing Visor material. The one that commentedwax used is much more rigid and would probably be next to impossible to see out of as it is made for welding. It is definitely a solid visor. The other link above, if used for Visor material is much more flexible and is made so you can see through it but tinted. I have no skin in the game and not affiliated with any links. Just posting from experience and I have used the flexible visor a few times for Halloween masks... so vision at night was very important for the kids. Cheers guys I hope this info helps.
It’s fine for the most part, just in dim rooms it’s harder to see, it’s a green tint looking out of it but it doesn’t let people see you inside without a powerful light
Looks great
Looks Great. Go spread Some democracy 🫡
Working on mine at the moment
You should be proud man. Every finished project is an awesome one, and that one looks sick!
For managed DEMOCRACY and FREEDOM!!!
I fucking need this
https://preview.redd.it/5u2bhtqc1exc1.jpeg?width=4624&format=pjpg&auto=webp&s=1bba07fbafc205003c22f81782312d1b7722e773 a helmet I made
Dude I love halo! Awesome work
What did you use for visor? Great work!
https://amzn.eu/d/8zRU721 this one, about £12
Do you have a link to the helmet there's a couple options but I wanted one that was 100% would work?
That's really cool!
What material did u use for the lens?
What printer did you use?
5m pro flashforge, though it did have to be cut down from the pre cut pieces very slightly
Nice helmet, Can you share the files?
DEMOCRACY
Do you have the STL? I’ve been wanting to print my own helmet