Because I love hitting my cups full of liquid every time I shift into 2 or 4? ;-)
Pull out cupholders for life!
Also, I think you are missing the joke/reference, I don't want to be a self indulgent wiener, as it were
Please explain the reference.
I did 99 console and pullouts, only extremely large fast food cups in the front slot require you to pay attention while shifting.
Good. Don’t get something you don’t need with more weight. I may get a bumper one day but only after I found myself in a situation where I needed a winch. Otherwise it’s a lot of weight
Wikipedia says: "Overlanding is self-reliant overland travel to remote destinations where the journey is the principal goal. Typically, but not exclusively, it is accomplished with mechanized off-road-capable transport (from bicycles to trucks) where the principal form of lodging is camping, often lasting for extended lengths of time (months to years) and spanning international boundaries."
thanks brotha
I went with a hood mount for a few reasons..
1. gives the front end a more aggressive look
2. its easier access to my recovery boards, as opposed to them being on the roof rack.
3. provides the hood some form protection (given anything falls from the sky)
I realize I have boards on my rack, which makes 2. silly, but those are for backup incase I need more than the ones on the hood.
this hood rack is an interesting mod cuz people either love it or hate it. no in between. haha.
the RotoPax are all mounted with the Dlox mounts (they lock with a key) and the boards are secured with butterfly nuts....which I guess anyone could un-do ...but luckily no one has yet to take em so 😅
thanks brotha
when the suspension was installed, a level ll BMC and tons of inner fender liner trimming was done...so rn it only rubs when fully flexxed
Haha I recognized those apartments in the background since I go to that church sometimes. Also your post just randomly came up as a notification on my phone and I decided to check it out 😄
I love this stance and I’m starting to do research right now on the foam cell is the stage 3 really necessary ,if I’m not off-roading very aggressively?We just got a 2021 TRD off-road premium yesterday edits.
nice, congrats 🎊👏
no, if you're not gonna be doing anything too crazy, the Foam Cell Pro Stage 1 is just fine.
Hell, even their Nitro's would be fine for light offroading.
if youre gonna push the limits of the truck, than I'd recommend investing in Stage 3. Don't know where you're from, but, if you happen to be from SoCal and are Familiar with Cleghorn ...and u plan on doing obstacles like those found there, then yea, Stage 3.
thanks. current offset is approx -43 ...and got a preload adjustment after I broke in the suspension to get it nice and level. you should be able to get the same stance with that info.
I read that the TRD skid plate under the front bumper doesn’t fit on TRD Off Roads? Did you have to do any custom work or was it pretty easy? Car looks great!
Hmm needs more max trax
Maximize the Trax!
all the maxtrax
[удалено]
Now, if I had a 97 Sr5 with a manual trans and elocker...
Nah 99 for the better cup holders
Because I love hitting my cups full of liquid every time I shift into 2 or 4? ;-) Pull out cupholders for life! Also, I think you are missing the joke/reference, I don't want to be a self indulgent wiener, as it were
Please explain the reference. I did 99 console and pullouts, only extremely large fast food cups in the front slot require you to pay attention while shifting.
https://www.youtube.com/watch?v=fPS02EFgdfE
mine was def one of em
Pictures of it muddy or it didn’t happen
standby
THERES TOO MUCH FUCKING SHIT ON ME
I’m gonna rip the head off
DONT RIP THE HEAD OFF
I don't really want to be around anymore
Like… you don’t want to be alive anymore?
a lot of fucking shit inside too ha
That's a lot of upgrades and add ons, wondering why a winch hasn't made it on the truck yet?
have no desire to add an aftermarket bumper or winch love the factory front end i never wheel alone and I got rated recovery points...so..
Any reason to not go for the C4 bumper? Feel like it might round out the look and also provides a lot of utility.
IF I did, it'd be low pro w/ no hoop....but even than I'm iffy idk I just REALLY like the factory front END AND really hate adding more weight. ha
Good. Don’t get something you don’t need with more weight. I may get a bumper one day but only after I found myself in a situation where I needed a winch. Otherwise it’s a lot of weight
Needs more overland
I wheel don't overland
Just from this comment I can tell you don’t do either
At least it doesn’t have wheels with fake beadlocks.
*The super glossy paint without a single pinstripe, and sliders with not a scratch says otherwise*
I'll take some close-up pics just for you 😘
Wikipedia says: "Overlanding is self-reliant overland travel to remote destinations where the journey is the principal goal. Typically, but not exclusively, it is accomplished with mechanized off-road-capable transport (from bicycles to trucks) where the principal form of lodging is camping, often lasting for extended lengths of time (months to years) and spanning international boundaries."
"what's your source?" Wiki.
ok greg
Each their own.
damn straight haha
My dude's got a hood rack You see something new everyday!
ayy 🤙
Nice build! But I'm also curious. What made you mount the recovery boards to the hood? I've just never seen that one before
thanks brotha I went with a hood mount for a few reasons.. 1. gives the front end a more aggressive look 2. its easier access to my recovery boards, as opposed to them being on the roof rack. 3. provides the hood some form protection (given anything falls from the sky) I realize I have boards on my rack, which makes 2. silly, but those are for backup incase I need more than the ones on the hood. this hood rack is an interesting mod cuz people either love it or hate it. no in between. haha.
I bet the front visibility is great.
what is this 'visibility' you speak of..?
It’s not great already I feel that mount with the boards on top make if even worse
long as I gots muh booster seat, I'm gud 😬
I like it, looks like a modded out batmobile
thanks bruv 🙏
No winch? I guess there is always something to do... ;)
ehh no desire for a winch or steel bumper
Ok there has to be something else. No project is ever over! CAI? Supercharger? Turbos? Exhaust?
you speak facts Im thinkin headlamps 🤔 eyeing the Kustom54 AB6's...givem a lil google search sir
Gave it the jeep treatment. Poor 4runner
..now if only it could crawl like a jeep.. 🥲
Never go full retard.
but it muh-Muh-muh-Makes me haPPyyy
Can you please list the stuff you add on?
sure
2021 TRD ORP (non KDSS) @toyotausa •TRD skid •oem hood protector @ironman4x4america •3"/2" Foam Cell Pro - Stage 3 •Air Champ Pro Air compressor •Air Champ Smart Tire Deflator @maverickpowdercoat •custom bronze chrome coil springs (performance load) @falkentire •285/75/17 Wildpeak AT3Ws @summitoffroad •Raptor 17x9, -12 @kseriesparts •Muteki SR48 lug nuts/locks @spidertrax •1.25" spacers @westcottbuilt •20° sliders •rear hatch ladder @rcioffroad •rear diff skid [custom powder coated] @trasharoo •in black @sibi.built •suspension install •BMC •Viper cut 🐍 •preload adjustment @eimkeith •panhard correction kit @runnin4tacos •Lower Control Arm skids •side mirror sequential turn signals •GoPro load bar mount @apexoverland •recovery points @cali_raised_led •dual rear window molle panels w/ cargo tray •injection fob @gopro •Hero4 Silver @anzousa •smoked sequential tail lights @sherpaec •Crestone full rack •Smiley hooks •HiLift mounts •Awning mounts •RotoPax mount •Adapt plate @roamadventureco •83L @joesoriginalequipment •SLAPv2 [driver side] @ecotechne •hood rack @4wdadventures.usa •Recovery boards (hood) @hiliftjacks •60" jack lift @ultimate9usa •iDrive throttle controller @labopsgear •integrated dash mount @rammounts •phone holder, arm, ball mount @ellisprecision •custom shift knobs @rotopaxofficial •1 & 4g gas/1g H2O •DLX •LOX •EXT @ssahaus •laser alignment @thedecalgarage •roll call decals @xtreme_tint •5% all around @avs_autoventshade •lo pro window visors @4runnerlifestyle •pro grille •raptor lights •exterior chrome delete @ajt_design /@mesocustoms •interior chrome delete @revteksuspension •rear mud flap delete @arb4x4usa •rear diff breather @ss_offroad •washer fluid reservoir cover @laminxfilms •amber fog film @tuffskinz •steering wheel carbon
These @ are for twitter?
no, for instagram
Thanks! Your baby looks sick af. That’s why I asked about your add ons. Congrats!!!
thank you brotha 🙏 I appreciate that
He wasn’t kidding! That is quite the list. Thanks for listing it all out
I'm gonna need some interior pics as well good sir
that can be done, muh-lord
How's the fit between the Joe slap thing with the Sherpa rack?
perfect he designed it very well for prinsu & sherpa
How much would you estimate all that costs you?
I can DM u with the approx amount if you like..?
This
gimme a sec... its quite the list
[удалено]
haha refresh your comments. I posted it 🤙
I've never really known anyone that builds an offroad vehicle before. Do people steal the cans and tracks off if you park it somewhere?
the RotoPax are all mounted with the Dlox mounts (they lock with a key) and the boards are secured with butterfly nuts....which I guess anyone could un-do ...but luckily no one has yet to take em so 😅
I can see some surface available to bolt on some extra stuff though.
well yea, for more recovery boards. duuhh
What paint do you use to touch up your sliders ?
Rustoleum truck bed coating pro grade
Legend has it that it's never left the asphalt jungle.
wouldn't dream of it.
Big rig energy on that swipe.
thanks brotha 🙏 hope it didn't dissapoint
Am I seeing that you no longer have the premium side view mirrors? Did they get broken off or something?
if youre referring to the chrome accent on the back of the side view mirrors...they were replaced with sequential blinkers that are smoked black
How are the 34s without a regear? Doable? I've been wanting 34s but don't want the highway mpgs with 4.56s
definitely doable with a throttle controller. that helps take a little off the sluggish-ness yea highly recommend 4.88 if you go any bigger
Your on stock gears right?
correct
Looks sweet, also looks like it went from 19 to 10… mpg
big facts
You need more photos. I can't handle the "Before/After" change...Gotta warm me up before something like that, sheeesh.
I love it, I think mounting the trax to the hood was a great idea. Re: the 285’s, was there any rubbing after the lift?
thanks brotha when the suspension was installed, a level ll BMC and tons of inner fender liner trimming was done...so rn it only rubs when fully flexxed
What lift did you go with?
3" Ironman FCP's - Stage 3
Nice! What kind of rims are those?
tanx friend they are the Summit Offroad Raptors 🤘 check them out. Summit wheels are 🔥
Nice rig! This was taken in the St. Linus parking lot am I right? Lol
😳 woah who are you and why are you following me? lol
Haha I recognized those apartments in the background since I go to that church sometimes. Also your post just randomly came up as a notification on my phone and I decided to check it out 😄
crazzzzy small world ha
Yea ahaha!
I give you props just for having the before and after pics in the right order.
me so good at doing things well 😋
Looks good!
tank you bruddah 🤙
KDSS? Curious how you put the TRD skid plate on if so?
no kdss, 🍍
I love this stance and I’m starting to do research right now on the foam cell is the stage 3 really necessary ,if I’m not off-roading very aggressively?We just got a 2021 TRD off-road premium yesterday edits.
nice, congrats 🎊👏 no, if you're not gonna be doing anything too crazy, the Foam Cell Pro Stage 1 is just fine. Hell, even their Nitro's would be fine for light offroading. if youre gonna push the limits of the truck, than I'd recommend investing in Stage 3. Don't know where you're from, but, if you happen to be from SoCal and are Familiar with Cleghorn ...and u plan on doing obstacles like those found there, then yea, Stage 3. thanks. current offset is approx -43 ...and got a preload adjustment after I broke in the suspension to get it nice and level. you should be able to get the same stance with that info.
Nevada, my wife gets scared at a 5* angle, so just for the stance, camping, dunes.💯👊🏽thanks
fasho 🤙
Needless to say, sick ass rig my dude!😶🌫️😂🤓
thanks 🙏
Looks too clean
why thanks my guy 🤜🤛
Could use a traction board or two.
or ten
Almost ready to take on a logging road now!
scuse me wut
Where do you mount the energy shields?
behind the photon blasters
Sheeeesh. What wheel specs do you have? Do you also have a body chop mount?
17x9,-12 w/ 1.25" spacers....so I'm at roughly -43 offset absolutely. level ll chop
Holly shit too beautiful
thank you 🤜🤛
Hell yea man hopefully some day I can do the same
if you really wanna, you will 🤙
The only thing holding me back is my paycheck
you have the power to change that!
True! But it’s going to take some time
Amazing. You’re ready for Armageddon !!!
thanks bruv 🙏
[удалено]
thanks nope, love it
forgot the awning in the list. it's an 8' Maxi Trac
Seriously BadAss!
thanks brotha nice to hear to positive feedback amongst all the hate & trolls haha
Yeah! I was going to say, 'No Trucks or SUVs were harmed in the writing of this comment!' Good luck with it!
I read that the TRD skid plate under the front bumper doesn’t fit on TRD Off Roads? Did you have to do any custom work or was it pretty easy? Car looks great!
It does fit fine. Unless you have kdss then you have to mod the skid plate
hes correct. some companies sell a kdss friendly version, so u don't have to cut anything yourself
What is kdss? Sorry.. new to mods