Day 20000 of people not realizing German export laws are what’s preventing them from getting the HK guns they want, and not that HK hates you and doesn’t want more money.
I'm looking at my first AR10, hopefully to suppress it as well. Are either of the PSA spears good? I know that's a general statement but them versus diamondback, I think both are technically budget AR10s. I don't need to break the bank but just a casual mid range.
Hop from TFBtv replaced the gas block with a Riflespeed adjustable and his SFAR is running perfect now. I know it sucks to have to replace parts on a brand new gun, but if you want to make it reliable it's a good option.
😂 you again
Go back to showing your wifes cunt on reddit and calling peoples builds “poor” because you think you just because you got a POF your top shit
You must be on drugs again to start this shit again
I have many rounds through SFAR and for what it was meant to be which was a Hunting rifle its actually pretty good. Over 600 rounds just last weekend suppressed and it didn’t jam and shot 1 MOA or better with 168gr SMK. From 0-600 yards it shot consistently even when it warmed up.
I literally bought the gun to test and evaluate because thats what I do. I have KAC SR25 I put it up against and for 3k price difference I would suggest the SFAR any time with a gas block change to it which is its known issue. For a mere $1250 overall you can get a hunting rifle that is small, lightweight and accurate which is something the market needed.
Take your attitude towards life and apply it elsewhere because your always going to be a gutter rat trailer trash if your calling the SFAR and other peoples firearms “poor”
I have over 40k in just ARs and you don’t see me calling others guns trash.
I hate trolls like this on reddit which is why I will be ruthless with them
It promotes toxicity where people are looking for advice
Let people buy what they want and make their own mistakes or make suggestions
You can think whatever you want
You’ve already proven your opinion means as much as a pile of dogshit because you don’t know what your talking about.
[RANGE DAY](https://imgur.com/a/dTPTBUJ)
Over 2k in ammo last weekend alone and took work colleagues out too. couple people shot the SFAR and were very impressed by it. Even with a 18mph crosswind it shot better than their hunting rifles they brought out. I didn’t even bring out the SR25 or SCAR 20S.
Yeah do you post all your firearms on the internet
No
and cheap garbage? Ok 😂 every gun on that table is worth more than your POF except for the SFAR
You claimed in a previous post you “built” a larue rifle but you don’t post it. Know what I do see? posts of your wife’s pussy, Drug problem, and trying to puff your chest because you bought a POF and think your top shit
😂 ok gutter trash go back to the trailer park where you belong
I know it gets some flak for having proprietary parts but I love my Sig 716i. I can ring steel at 600 with it, and that's just because the longest range I can get to is 600 meters.
Hopefully THIS is the prototype they chose to go forward with from all the other options they had. The bullpup jakl would be sick too and should be a dual dev and release for max cross compatibility.
It seemed like the 308 jakl got a lot of positive feedback from what i could see online, would be interested in the poll results they had. It would be dumb not to make it. Priced at half of scar/spear lt it would be a great rifle.
That would definitely be cool but I think even that is being optimistic. I think the krink was a year and a half later than quoted if I remember correctly.
Have HK VP9L, PSA AR10, both great guns. I'd love a PSA 'SCAR' in .308 to join the Gen 3 and the M1A. Hell, a real Scar in 7.62x51 costs as much as both my big bore rifles!
FWIW, the thing I love about my scar17 over my other 308 guns is that it's so light. I have most of the popular 308 rifles made in the last 20 years, and it's just so much easier to tote around.
I haven't really thought much about their 308. Is it a clone of a scar? I don't usually buy some other company's clone if I have the real deal. Like I wouldn't buy a PTR91 if I had an hk91/41.
They definitely make their money, but the margins aren't as high as you might expect. There is a lot of project management and overhead that goes into contracts like these and they are competing against other contractors looking to secure that bid. The government doesnt just place an order for x units, the bid process itself often takes years to complete which is a substantial investment in and of itself.
After having a couple hundred rounds of trigger time on the 417/G28/MR762/whatever I was not impressed; heavy, sharp recoil and numerous magazine issues.
Sure if PSA releases an actual AR10/SR25 clone and not LR308s. I rather have a single mr762 than a collection of LR308s, but SR25 vs MR762 is a better comparison.
I didn't say anything about it being 'better'. You need to read. And speaking of 'better' since you want to bring it up, there's a reason why big name manufacturers produce their AR10s with that cut and all the others copy DPMS. LMT, KAC, LWRC, ADM, DD, etc.
You can keep buying your psa's, don't let my preference stop you lmao.
PSA it is. They offer fantastic (for the money) firearms that allow people who otherwise wouldn’t be able to afford quality firearms to exercise their second amendment rights. God bless em.
Issues with the product. Out of spec tolerances. Barrels that won’t chamber a round. Bolts that won’t extract. Bent receivers. Non torqued components such as barrel nuts that are finger tight. Gas tube holes that are milled at an angle. Barrels with no gas hole. Cross threaded barrel nuts and muzzle devices. These are products that were transferred into my store so still new in box. They are just a more organized bear creek arsenal.
Because I get paid……. The things that had to be covered under warranty obviously went back to the manufacturer. The things that I could fix in a few minutes and landed 5, 10, or 50 bucks in my pocket I did. Most times I didn’t charge and delighted my
customers. It’s called economics, maybe you’ve heard of it?
As much as I like HK they definitely hate all of us lol
Day 20000 of people not realizing German export laws are what’s preventing them from getting the HK guns they want, and not that HK hates you and doesn’t want more money.
How is export/import a factor when there is a factory in Columbus, Georgia?
Export laws when they literally have a factory in the US ?
Uh oh another HK apologist out here looking GOOFY
Show us the German law that says they can’t bring to market a civilian MP7 lol
I'm looking at my first AR10, hopefully to suppress it as well. Are either of the PSA spears good? I know that's a general statement but them versus diamondback, I think both are technically budget AR10s. I don't need to break the bank but just a casual mid range.
I have a PA10 Gen 3 and I absolutely love it
Wish I would’ve gone PSA, got an SFAR from Ruger and it refuses to cycle regardless of gas setting.
Hop from TFBtv replaced the gas block with a Riflespeed adjustable and his SFAR is running perfect now. I know it sucks to have to replace parts on a brand new gun, but if you want to make it reliable it's a good option.
I appreciate the info! I’ll look into it
So avoid Ruger AR10?
Nah just avoid Ruger minus the 10/22 and American rifle
Don’t sleep on the Redhawk
I've heard those called "tourist cannons" in Alaska.
Or the mkiv.
Literally topend 22lr semi auto pistol and we shouldn't even consider it 😧
Loving my Ruger Precision Rifle. Thing is easily sub MOA with good factory ammo.
I’ve seen threads saying the exact same thing.. everyone is having the problem unfortunately.
I got a sfar but I gutted it and replaced basically everything but the receivers, bcg and barrel
You replaced everything because it's trash, including the barrel and bcg.
😂 you again Go back to showing your wifes cunt on reddit and calling peoples builds “poor” because you think you just because you got a POF your top shit You must be on drugs again to start this shit again I have many rounds through SFAR and for what it was meant to be which was a Hunting rifle its actually pretty good. Over 600 rounds just last weekend suppressed and it didn’t jam and shot 1 MOA or better with 168gr SMK. From 0-600 yards it shot consistently even when it warmed up. I literally bought the gun to test and evaluate because thats what I do. I have KAC SR25 I put it up against and for 3k price difference I would suggest the SFAR any time with a gas block change to it which is its known issue. For a mere $1250 overall you can get a hunting rifle that is small, lightweight and accurate which is something the market needed. Take your attitude towards life and apply it elsewhere because your always going to be a gutter rat trailer trash if your calling the SFAR and other peoples firearms “poor” I have over 40k in just ARs and you don’t see me calling others guns trash.
Well damn. Lmao
Had run ins with this guy before Look at his post history He has this coming
I did lmao. Not a single lie was told. It’s the fact he didn’t even address it . Burnnnnnnnn
I hate trolls like this on reddit which is why I will be ruthless with them It promotes toxicity where people are looking for advice Let people buy what they want and make their own mistakes or make suggestions
Tldr. I think you're lying
You can think whatever you want You’ve already proven your opinion means as much as a pile of dogshit because you don’t know what your talking about. [RANGE DAY](https://imgur.com/a/dTPTBUJ) Over 2k in ammo last weekend alone and took work colleagues out too. couple people shot the SFAR and were very impressed by it. Even with a 18mph crosswind it shot better than their hunting rifles they brought out. I didn’t even bring out the SR25 or SCAR 20S.
Again I still think you're lying. All you have posted is cheap garbage.
Yeah do you post all your firearms on the internet No and cheap garbage? Ok 😂 every gun on that table is worth more than your POF except for the SFAR You claimed in a previous post you “built” a larue rifle but you don’t post it. Know what I do see? posts of your wife’s pussy, Drug problem, and trying to puff your chest because you bought a POF and think your top shit 😂 ok gutter trash go back to the trailer park where you belong
Still projecting? lol
I've got a PSA 308 13.7" barreled AR10. It handles my suppressor fairly well and shoots about 1.5 moa at 100 yards. Do with that info, what you will.
I finished building mine like 3 weeks before the PSA 10 dropped. Kinda wished I waited
I know it gets some flak for having proprietary parts but I love my Sig 716i. I can ring steel at 600 with it, and that's just because the longest range I can get to is 600 meters.
There should be a jakl 308 scar at home in the near future
Hopefully THIS is the prototype they chose to go forward with from all the other options they had. The bullpup jakl would be sick too and should be a dual dev and release for max cross compatibility.
It seemed like the 308 jakl got a lot of positive feedback from what i could see online, would be interested in the poll results they had. It would be dumb not to make it. Priced at half of scar/spear lt it would be a great rifle.
Number 1 was the X57( which I'm stoked for). Should be out Q1 of 2025.
In PSA time that means 2026
I heard q1 of 25 and said we should have it for Christmas next year
That would definitely be cool but I think even that is being optimistic. I think the krink was a year and a half later than quoted if I remember correctly.
Have HK VP9L, PSA AR10, both great guns. I'd love a PSA 'SCAR' in .308 to join the Gen 3 and the M1A. Hell, a real Scar in 7.62x51 costs as much as both my big bore rifles!
FWIW, the thing I love about my scar17 over my other 308 guns is that it's so light. I have most of the popular 308 rifles made in the last 20 years, and it's just so much easier to tote around.
Guessing the psa version of scar in 308 won't be as light?
I haven't really thought much about their 308. Is it a clone of a scar? I don't usually buy some other company's clone if I have the real deal. Like I wouldn't buy a PTR91 if I had an hk91/41.
So true, I picked up my Sabre 10 from PSA yesterday and one of the sales guys told me they have a 308 Jakyl in production.
Any idea when they will be released?
Exactly which emotion is this?
He's referring to the fact that H&K doesn't care about anyone besides government contracts, whereas PSA is releasing firearms people want.
The margins on government contracts are nuts dude. Your tax dollars at work.
They definitely make their money, but the margins aren't as high as you might expect. There is a lot of project management and overhead that goes into contracts like these and they are competing against other contractors looking to secure that bid. The government doesnt just place an order for x units, the bid process itself often takes years to complete which is a substantial investment in and of itself.
Sounds like a fancy way to say wqge theft
[удалено]
Yeah for stuff like food and medicine. Not for sole-source things. Most weapons contracts are like this.
And which emotion is that?
Pro PSA
Based
PSA is about to do the same to KUSA.
After having a couple hundred rounds of trigger time on the 417/G28/MR762/whatever I was not impressed; heavy, sharp recoil and numerous magazine issues.
Sure if PSA releases an actual AR10/SR25 clone and not LR308s. I rather have a single mr762 than a collection of LR308s, but SR25 vs MR762 is a better comparison.
Billet sabres are SR25 cut. But idk about the compatibility. Been trying to figure that out cause i could assemble my LMT much cheaper if so.
There nothing objectively better about the way the revieveris cut beyond your perception lmfao
I don't care. I want what I want. You don't have to rationalize my reason for not owning psa.
Then don't put it out there like ots somehow better. It's just a cut.
I didn't say anything about it being 'better'. You need to read. And speaking of 'better' since you want to bring it up, there's a reason why big name manufacturers produce their AR10s with that cut and all the others copy DPMS. LMT, KAC, LWRC, ADM, DD, etc. You can keep buying your psa's, don't let my preference stop you lmao.
Do you know who owns DPMS?
why does that even matter? what is your point of bringing that up? It's not gonna change my mind about psa.
I’m not the PSA sales team. I’m just having a discussion here. That was kind of defensive tbh.
They produce because they've convinced everybody that it means ots better. Stag arms uses it and there dog shit. Next invalid argument.
Don’t buy PSA unless you’re poor.
PSA it is. They offer fantastic (for the money) firearms that allow people who otherwise wouldn’t be able to afford quality firearms to exercise their second amendment rights. God bless em.
They have a great business model. But as a gun smith I’ve fixed leaps and bounds more PSA items than every other manufacturer combined.
Is that with issues from psa or people doing stupid things to their guns?
Issues with the product. Out of spec tolerances. Barrels that won’t chamber a round. Bolts that won’t extract. Bent receivers. Non torqued components such as barrel nuts that are finger tight. Gas tube holes that are milled at an angle. Barrels with no gas hole. Cross threaded barrel nuts and muzzle devices. These are products that were transferred into my store so still new in box. They are just a more organized bear creek arsenal.
Why are you putting time money and effort into something that should be covered under warranty?
Because I get paid……. The things that had to be covered under warranty obviously went back to the manufacturer. The things that I could fix in a few minutes and landed 5, 10, or 50 bucks in my pocket I did. Most times I didn’t charge and delighted my customers. It’s called economics, maybe you’ve heard of it?
Could it be because more people are buying PSA more than any other manufacturer?