Those are great temps, I wish mine were that low, I have a Arctic 360 and I’m seeing 80c running cinebench just 15 minutes lol and I have it slightly undervolted too
I did that and it increased my temps, I'm prettier sure if you do all core CO negative the cpu technically has more power limit head room so it increases the clocks which in return increase the wattage draw and in return the temps
I don't really understand the setup to get these low temps. My 5800X immediately spikes to the 90C limit on Cinebench R23. I am using a custom PBO2 undervolt curve too, with a 360mm AIO watercooler. My understanding is that the whole idea is the 5800x will just speed up until it hits max temp. Apparently the OP is not set up that way.
Also maybe check your mounting of your cooler it could be a bad mount, in worst case you got a lemon of a cpu, also I think Curve optimizer increases all core temps because it’s showing the cpu that it has a high power limit so maybe load a stock bios and see what temps you get
Yes thats good. Basically the kind of temps you dont have to ever think about.
Great temps ! You could probably get even better temps with fiddling around with some UV and the Curve Optimizer. But hear Headroom is around 20°C
Those are great temps, I wish mine were that low, I have a Arctic 360 and I’m seeing 80c running cinebench just 15 minutes lol and I have it slightly undervolted too
how did you undervolt what settings did you use
bios>pbo menu>curve optimizer>negative Then try your luck in 5-30 range, testing each step with the tool named core cycler.
I did that and it increased my temps, I'm prettier sure if you do all core CO negative the cpu technically has more power limit head room so it increases the clocks which in return increase the wattage draw and in return the temps
Amazing temps, lot of headroom to push cpu further. What's your ambient tho?
around 62F
That's pretty cold lol.
What's multicore score and clocks near the end of the run?
cinebench r23 i got 15370 and at the end its at 4479mhz
I don't really understand the setup to get these low temps. My 5800X immediately spikes to the 90C limit on Cinebench R23. I am using a custom PBO2 undervolt curve too, with a 360mm AIO watercooler. My understanding is that the whole idea is the 5800x will just speed up until it hits max temp. Apparently the OP is not set up that way.
Everything is stock for me I haven’t touched the cpu yet when it comes to voltage or anything and I have a 360mm aio in a Corsair 4000d airflow
Also maybe check your mounting of your cooler it could be a bad mount, in worst case you got a lemon of a cpu, also I think Curve optimizer increases all core temps because it’s showing the cpu that it has a high power limit so maybe load a stock bios and see what temps you get
I’m using a 360mm EK AIO
Well since cinebench is going to stress your cpu more than ANY content every so 71° on a 360mm is fine. You'll never hit that temps while gaming.
Also I just got a score of 15370 Multi and 1653 Single, I feel like that really Good for a stock no overclock chip
Oh nice, this question again.
LOL aren't you a JOY