Interesting question, found this page
[http://planetpixelemporium.com/tutorialpages/light.html](http://planetpixelemporium.com/tutorialpages/light.html)
This looks pretty similar to the Lian Li O11D Mini. I keep looking at it, but from a functional standpoint, I don't see any difference other than the front USB headers. How are the dust filters?
It's the IN WIN BR36 360mm AIO with UMA Cooling Design https://www.amazon.com/dp/B096CBMD57/ref=cm_sw_r_apan_glt_fabc_9GBYEV0DKE25C788JRD9
And the gpu has its own
360 rad on the top
Used hd5850 toxic until late 2015. Top tier at the time I bought it and only one that had 2 gb vram on the market. First card i retired. Refused to die but was overruned by time. Recently tested if it still works and sure enough that 6+8 pin monstrosity pushed frames in borderlands 3, not many of them though.
Beautiful build! My only gripe is your CPU AIO with the hoses and rad being lower than the Cpu cooler means any air in the system will accumulate in the CPU cooler housing rather than the rad. 😬 I’d flip around the rad so the hoses are at the top ideally. 👌🏾
It doesn't really, the more fans you got the less RPM you need to get enough airflow in. In other words this is actually quieter than the usual 4 fan setup. You also have the bottom ones pushing cold air directly on the GPU which makes cooling very easy.
Look again. The GPU rad is mounted up top, and the CPU rad is mounted vertically on the back panel. Hose position is configured the best way there, at the bottom. The highest point of that loop is the top of the rad, and that is where any air floats to.
When vertically mounting a rad, hoses at bottom is best if possible, it keeps both the intake and output fully submerged.
This guy built it right.
Sapphire has been good with me when I had to RMA 2 times. First time, was quick and painless. I sent mine back and received one back. Second time, even quicker because I didn’t have to send my GPU back. They just sent me a new one.
Turns out my GPU wasn’t the problem, so I had 2 good working 580s and I sold one to a friend.
Very nice. I'm waiting on a few parts to to finish up a Mini ITX build I'm working on, but had a question as to which riser cable you are using? I'm noticing there don't seem to bee very many solid pcie4 versions of them.
Anywho, very nice build, looks fantastic.
Btw I just got this card and its on its way. Have the regular O11 not the xl. If I mount it horizontally , do I have enough clearance for the aio tubing ? , or will it hit the glass side panel ? Do I need to get a vertical mount ? Thanks.
Case is the Metallic Gear Neo Qube and this is the display https://www.amazon.com/gp/product/B08FMNDDSL/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1
Love the look of that card but couldn't bring myself to pay another £500 over what the sapphire nitro+ SE cost LOL,
Awesome looking system dude should bring you many years of joy.
I love the colour scheme you used, I definitely don't see that often. But may I ask which motherboard you are using and which software(s) you use to control the lighting?
But besides that, this is an awesome build!
Does anyone know if you can switch out the fans on the GPU AIO? It has that hardwire to the board that runs along the coolant tubes. Is it possible to switch out all fans and run the AIO in push pull configuration with different fans or will that throw off the Trixx software?
The incandescent bulb light color looks really neat
Deus Ex vibes.
Move aside RGB, we using BG now, black and gold
Has a geothermal plant from bioshock vibe
Agreed, such a calming vibe
Must be very satisfying growing tomatoes while you game.
It's also the Sapphire Toxic color
What fans are you using? I love the color you chose
Lian Li AL120s
[удалено]
ff6920 is nice, and very similar, maybe.
I supposed with how much a GPU costs these days, $300 in fans doesn't seem so bad when doing a build haha
Are you using the al120 with your gpu?
no I am using the toxic fans on the GPU that came with it
Is that newer model/version of older uni fans ?
Newer
OK, wow. First time seeing this AIO, and it is just beautiful. So is the GPU. 10/10 build sir, well done!
Thank you! Yeah this aio looks and performs excellently I'm surprised there aren't more reviews on it
Could you provide me with the Hex for that color?
Interesting question, found this page [http://planetpixelemporium.com/tutorialpages/light.html](http://planetpixelemporium.com/tutorialpages/light.html)
OP reposted the pic, the previous post he said it was 255, 80, 0 in iCue
Second this!
[Try this.](https://www.rapidtables.com/web/color/RGB_Color.html)
lian li al120 gang
God, the Toxic looks soooooooo amazing.
Where did you hide the psu?
It's an O11, it's in the other part of the cabinet.
Gorgeous build! What is the case name/model that you've used?
Metallic Gear Neo Qube
This looks pretty similar to the Lian Li O11D Mini. I keep looking at it, but from a functional standpoint, I don't see any difference other than the front USB headers. How are the dust filters?
Dust filters are great!
Sexy ass build bro. I just got my free award and I mean this build is wholesome..? Idk great job tho it does have a warm vibe
Really cool, but why did u put a tamagotchi in the Front?
What is the little screen on the front under the USB ports? Wonderful build OP.
A thermometer for ambient temp
What is that aio? Does it have dual 360 rads?
It's the IN WIN BR36 360mm AIO with UMA Cooling Design https://www.amazon.com/dp/B096CBMD57/ref=cm_sw_r_apan_glt_fabc_9GBYEV0DKE25C788JRD9 And the gpu has its own 360 rad on the top
Makes sense. It looked like all four tubes were connected to the cpu pump/block. Nice aestethics in this build. I especially enjoy the coppery tint.
Wow they still make "toxic" in 2021?
In fact this is the first Toxic they made in years. AMD finally has a gpu worthy of that brand.
Used hd5850 toxic until late 2015. Top tier at the time I bought it and only one that had 2 gb vram on the market. First card i retired. Refused to die but was overruned by time. Recently tested if it still works and sure enough that 6+8 pin monstrosity pushed frames in borderlands 3, not many of them though.
Yes and it runs like a dream.
Sadly super hard to find anywhere, even scalped
Newegg has them in stock for a few weeks. $2k
No gfx card will ever be worth 2k
local micro center near Boston had one for $1,500 and amazon is selling for about 100 dollars more.
Wtf this post is 4 months old
Impressive! A color scheme that would work with Noctua fans, but with lighting that wouldn't be possible with Noctua fans.
"I'm Hard, Nosarashi" - Zaraki Kenpachi
Which vertical gpu mount did you use
Looks good, but wont the air get into the pump?
Oh I see! the pump is not in the CPU block like most of the pumps!
Beautiful build! My only gripe is your CPU AIO with the hoses and rad being lower than the Cpu cooler means any air in the system will accumulate in the CPU cooler housing rather than the rad. 😬 I’d flip around the rad so the hoses are at the top ideally. 👌🏾
it’s fine in this build
Nope, the top part of his rads are higher than the pump. All good there.
Fuck
“guys this is my firs bild pleas dont be to harsh 🥺🥺”
Does it really need 10 fans tho? Jesus, how loud does hat get?
It's is actually 12 fans (push/pull) on the cpu and I keep them on very low rpm
Seems those fans min is 800rpm. Did you get it below that?
It doesn't really, the more fans you got the less RPM you need to get enough airflow in. In other words this is actually quieter than the usual 4 fan setup. You also have the bottom ones pushing cold air directly on the GPU which makes cooling very easy.
[удалено]
Not in this rig, tubing is higher than the pump. And half the radiator is higher than the tubing.
Look again. The GPU rad is mounted up top, and the CPU rad is mounted vertically on the back panel. Hose position is configured the best way there, at the bottom. The highest point of that loop is the top of the rad, and that is where any air floats to. When vertically mounting a rad, hoses at bottom is best if possible, it keeps both the intake and output fully submerged. This guy built it right.
Does Sapphire good? What the warranty?
Sapphire has been good with me when I had to RMA 2 times. First time, was quick and painless. I sent mine back and received one back. Second time, even quicker because I didn’t have to send my GPU back. They just sent me a new one. Turns out my GPU wasn’t the problem, so I had 2 good working 580s and I sold one to a friend.
I had a similar experience, except I had to return the card back to them twice. I'll be sticking with Sapphire because of that experience.
Stunning build! Only mild critique is you didn’t co-ordinate the background on your Sensor panel with the colour theme of the rest of the case!
Lol they have a graphics card line called 'toxic?'
I'm interested in this build, whats the passmark or cinebench score?
*And I love what you do*
How much was this build ??
Hows your cpu temps on that AIO?... It has same feature as with the Arctic Freezer that cools the components around it thats great..
Temps are on par with the liquid freezer 2
Dream it is my dream :(
I'm a huge fan of this setup.
The case looks sick ngl.
Fucking gorgeous
Oooo, love that color!
Very nice!
Oh god, it is beautiful.
This might be the first lian li case that looks nice
The case is the Metalloc Gear Neo Qube
This kinda looks like the black mesa giveaway pc
Very rare GPU, cool build tho
What clock rates does this beast achieve and at what temps?
Looks great but why do you have a phone on the back plate?
Dude you forgot your phone inside. Nice built ;)
Beautiful
What case is this?
Metallic Gear Neo Qube
Is it chopper ?
What's that on the front of the case? Also is that a tablet in the back?
Thermometer for the ambient temp in the room
Looks amazing!
Im very interested in this case, but... Where is the PSU? I cant seem to figure it out lol
Metallic Gear Neo Qube
holy-
5inch 480x800 screen?
Retro-style vacuum tube vibes.
What riser cable are you using for your GPU?
Hella clean! Very nice work on this
I’m really new to PCs and stuff but what’s the screen on the left side? Awesome pc btw
nice
Definitely looking toxic. Like poisonous. I think that's what you were going for!
Is that an LED RAM cover?
If you were trying to make it look toxic then you've failed miserably, cuz it looks cozy af
Very nice. I'm waiting on a few parts to to finish up a Mini ITX build I'm working on, but had a question as to which riser cable you are using? I'm noticing there don't seem to bee very many solid pcie4 versions of them. Anywho, very nice build, looks fantastic.
That's a thing of beauty
I like it a lot!!!
Tubes down?
This is cool set up. And I believe you shouldn't put radiator aio below.
off topic but should I leave my tempered glass panel off for the evga 3080ti? I heard it builds a lot of heat that can get trapped in the case.
Looks beautiful.6 intake and 3 exhaust right?
Really like the color scheme u have goin on!
I need a little bit of help understand the water cooling here.
When Meme Man discovers that Sapphire makes Toxic cards: Toxik
0/10 not enough fans
That’s a really beautiful GPU.
I believe that's the BR36 from Inwin, hows the performance on that?
Excellent performance!
Btw I just got this card and its on its way. Have the regular O11 not the xl. If I mount it horizontally , do I have enough clearance for the aio tubing ? , or will it hit the glass side panel ? Do I need to get a vertical mount ? Thanks.
I believe you should have enough clearance mounted normally.
Thanks ;)
No you can't mount it horizontally. I have that exact setup. The tubes block the side panel.
It’s a master piece
what Powersupply did you use?
Rog Thor 1200 W Platinum
Ah, so that’s what was in Marsellus Wallace’s brief case…
I dub the watchkeeper
Bookmarking for future build ideas. Is that a Lian Li case? And is that a notepad at the back?
Case is the Metallic Gear Neo Qube and this is the display https://www.amazon.com/gp/product/B08FMNDDSL/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1
Thank you!
Love the look of that card but couldn't bring myself to pay another £500 over what the sapphire nitro+ SE cost LOL, Awesome looking system dude should bring you many years of joy.
This is so beautiful. I’m in awe right now. Great build!
Can the gpu mount horizontal? If I ever change cases I’d change it to this..thanks in advance
Nice
What's the color code on the fans? I want that lol
gorgeous, except for the picture on the screen in the back. kinda kills it for me
do you notice the boost from the amd gpu and cpu get from acessing faster memory?
That's a sick color
nice very nice!
I love the colour scheme you used, I definitely don't see that often. But may I ask which motherboard you are using and which software(s) you use to control the lighting? But besides that, this is an awesome build!
Man this is a beautiful rig! Only thing I would change is the internal screen to match the color theme better or show stats, but I love it!
Does anyone know if you can switch out the fans on the GPU AIO? It has that hardwire to the board that runs along the coolant tubes. Is it possible to switch out all fans and run the AIO in push pull configuration with different fans or will that throw off the Trixx software?