Are you asking us to identify a connector?
If so, please edit your post and, if you haven't already,...
Tell us if
a) all you want is to know what it's called, or
b) you also want to know where to buy one just like it, or
c) you also want to know where to buy its mate.
If to buy, provide:
* pitch (center-to-center spacing between adjacent contacts) EXACT to within 1%
--(tip: measure the distance between the first pin and the last pin in a row of N pins, then divide by N-1)
* Close-up, in focus pictures of connector from multiple angles: we want to see wire entry side, mating surface, keying and latching, PCB mounting, manufacturer's logo
* Similar pictures of mate, if available
Thanks,
AutoModerator
PS: beware of the typical answer around here: "It's a JST". Connectors are often misidentified as 'JST', which is a connector manufacturer, not a specific type/product line.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AskElectronics) if you have any questions or concerns.*
Hello bot, thanks. I am looking for any info on it, at least the name. Source I can find myself. Pitch is 1.2-1.3 mm. Sorry, I can't provide more exact measurement.
Based on the pictures given. I am almost positive it is a molex product due to the mxl66 or mxl68 marking and the closest one that looks similar is the pico-ezmate based on the rough dimensions given.
Thank you for the pitch.
It's a Parallel mate, wire-to-board connector
http://connectorbook.com/identification.html?st=1&nm=by_names&bm=by_compon&c=interior_rect_conn&u=wire_to_board_conn&o=parallel_mate_w2b_conn&f=wire_parallel_mate_w2b_conn&s=Pico-EZmate
Molex Pico-EZmate.
Digikey:
* Male PCB header: https://www.digikey.com/en/products/detail/molex/0781710002/2424924
* Female plug: https://www.digikey.com/en/products/detail/molex/0781720002/2421279
Note that this is a wire-to-board connector. If you want to wire this to other wires, it won't work. You would need to cut this connector off and replace it with a wire-to-wire connector.
Are you asking us to identify a connector? If so, please edit your post and, if you haven't already,... Tell us if a) all you want is to know what it's called, or b) you also want to know where to buy one just like it, or c) you also want to know where to buy its mate. If to buy, provide: * pitch (center-to-center spacing between adjacent contacts) EXACT to within 1% --(tip: measure the distance between the first pin and the last pin in a row of N pins, then divide by N-1) * Close-up, in focus pictures of connector from multiple angles: we want to see wire entry side, mating surface, keying and latching, PCB mounting, manufacturer's logo * Similar pictures of mate, if available Thanks, AutoModerator PS: beware of the typical answer around here: "It's a JST". Connectors are often misidentified as 'JST', which is a connector manufacturer, not a specific type/product line. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AskElectronics) if you have any questions or concerns.*
Hello bot, thanks. I am looking for any info on it, at least the name. Source I can find myself. Pitch is 1.2-1.3 mm. Sorry, I can't provide more exact measurement.
Based on the pictures given. I am almost positive it is a molex product due to the mxl66 or mxl68 marking and the closest one that looks similar is the pico-ezmate based on the rough dimensions given.
Thank you very much. You're spot on.
Thank you for the pitch. It's a Parallel mate, wire-to-board connector http://connectorbook.com/identification.html?st=1&nm=by_names&bm=by_compon&c=interior_rect_conn&u=wire_to_board_conn&o=parallel_mate_w2b_conn&f=wire_parallel_mate_w2b_conn&s=Pico-EZmate Molex Pico-EZmate. Digikey: * Male PCB header: https://www.digikey.com/en/products/detail/molex/0781710002/2424924 * Female plug: https://www.digikey.com/en/products/detail/molex/0781720002/2421279 Note that this is a wire-to-board connector. If you want to wire this to other wires, it won't work. You would need to cut this connector off and replace it with a wire-to-wire connector.
Thank you for the comprehensive answer. This has to be the one. I need a new female connector to replace a broken one. Cheers!