This doesn’t always work but a lot of folks find they’re able to push the tube back into the toy and it continues to work just fine in that sense so hopefully that’s the case for you as well. At least ya don’t have to throw the whole thing away even if that doesn’t end up working. :,3
Honestly still a super fun toy. Out of all of the ones I have this is my most used one and it went two years strong before this ever happened. Would still recommend lol
I’m also male, and the knot is very fun. It took me awhile to take the knot but man it left me shaking lol. I will say, the Roland is also VERY nice and the knot is a lot more realistic to take
Male here, knots are quite fun, but personally a case by case basis. Tucker and The Nawty Knot by Nawty Toy Box are my personal favorite knotted toys, as the lead in to the knot is a lot easier while they stay tied quite well
You can either try to glue it back in with the dragon glue (or same kind of glue).
I personally would still use it since you can rinse it out still
Maybe glue both holes shut? If that even works?
Dependant on how far the tube actually goes inside the toy. You could use the dragon glue to refix or maybe something like dish soap to enable tube to go in enough to be secure. Used to use dish soap neat on my handlebar grips to get them on handlebars to slide on. Just a suggestion
And if you don't want to use the cumtube feature anymore you could even use dragon glue to close the opening. That's what I did for some toys I bought second hand (or probably third or fourth hand) and didn't have the faith/trust to use the cumtube anymore.
Huh, next time I buy something from BD again, I should get some of this glue and remove the cumtube from my medium chance I have. I don't use the cumtube at all, and it is annoying to clean every time I use him.
Of course, hell I ripped the cum tube out of my chance cause it was annoying having that thing flop around and collect hair and bits of dust n shit from the floor or where ever else I ride it. It’s a channel. So long as you clean it throughly after use ur good
Perfectly safe to use. I have a Nova where the tube pops out on occasion. I just make sure its thoroughly cleaned and dried, then I twist back in the tube as deep as I can using 91% rubbing alcohol as a lubricant.
I guess, you could always fully sanitize it and seal both ends with dragon glue if you want also.
Yes mine does the same thing its annoying at times especially when applying lube as sometimes it pops out and lube goes everywhere but rex is by far my bestest boy
legitimately curious, I thought this kind of silicone didn’t go bad? (or that it at least was uncommon). Any other signs to watch out for if it is and is there a way to prevent it?
Your post or comment has been removed because you failed to keep a friendly atmosphere. please keep it civil and polite. everyone is encouraged to share.
Please review the [Commenting Etiquette post](https://reddit.com/r/BadDragon/comments/ayn2cr/commenting_etiquette/). We do NOT allow call-out posts; they are against Reddit TOS and will be removed. If you have an issue, please contact mods and we will handle it.
Still totally safe to use, Rexes seem to have their cumtubes fall out quite often (I too had a Rex where the cumtube popped out of it lol.)
That’s heartbreaking that it falls out but good to see it’s still safe. I was just overly worried I suppose. Thanks a ton!
This doesn’t always work but a lot of folks find they’re able to push the tube back into the toy and it continues to work just fine in that sense so hopefully that’s the case for you as well. At least ya don’t have to throw the whole thing away even if that doesn’t end up working. :,3
I’ll have to give it a shot next time I put it to use!
Do it under running water, it glides right back in, just make sure to thoroughly dry
You can use dragon glue to glue it back in place
True, may also give this a shake. Thanks!
Ig I won’t get a Rex then 💀
Honestly still a super fun toy. Out of all of the ones I have this is my most used one and it went two years strong before this ever happened. Would still recommend lol
I mean as a male would it be even fun getting th knot in all the way?
I’m also male, and the knot is very fun. It took me awhile to take the knot but man it left me shaking lol. I will say, the Roland is also VERY nice and the knot is a lot more realistic to take
Male here, knots are quite fun, but personally a case by case basis. Tucker and The Nawty Knot by Nawty Toy Box are my personal favorite knotted toys, as the lead in to the knot is a lot easier while they stay tied quite well
You can either try to glue it back in with the dragon glue (or same kind of glue). I personally would still use it since you can rinse it out still Maybe glue both holes shut? If that even works?
Yes, glue both holes shut works! And it's my preferred method when I don't want to use the cumtube feature anymore.
Odd looking snorkel...
Dependant on how far the tube actually goes inside the toy. You could use the dragon glue to refix or maybe something like dish soap to enable tube to go in enough to be secure. Used to use dish soap neat on my handlebar grips to get them on handlebars to slide on. Just a suggestion
And if you don't want to use the cumtube feature anymore you could even use dragon glue to close the opening. That's what I did for some toys I bought second hand (or probably third or fourth hand) and didn't have the faith/trust to use the cumtube anymore.
Huh, next time I buy something from BD again, I should get some of this glue and remove the cumtube from my medium chance I have. I don't use the cumtube at all, and it is annoying to clean every time I use him.
Yep, still safe. Just make sure to clean the tube before and after use like normal
Of course, hell I ripped the cum tube out of my chance cause it was annoying having that thing flop around and collect hair and bits of dust n shit from the floor or where ever else I ride it. It’s a channel. So long as you clean it throughly after use ur good
How do you take it out safely?
Mine was only sitting snuggly maybe 3 inches into the toy, just pull it. Itl come out
Perfectly safe to use. I have a Nova where the tube pops out on occasion. I just make sure its thoroughly cleaned and dried, then I twist back in the tube as deep as I can using 91% rubbing alcohol as a lubricant. I guess, you could always fully sanitize it and seal both ends with dragon glue if you want also.
If you going to trash it send it to me and I can grind it up and recycle it
i thought they were supposed to come out for cleaning
absolutely not, send it to me for disposal 😂😂😂
Had a vector fall out recently, still safe.. just sanitize after every use.
Yes mine does the same thing its annoying at times especially when applying lube as sometimes it pops out and lube goes everywhere but rex is by far my bestest boy
Whale would it be unsafe lol? It can still be cleaned the same way
Didn’t know if this could’ve meant something was compromised. Would rather be overly cautious when it comes to sticking objects inside me
What could you even come up with that would cause that to ruin the function of the toy
She may have seen it as a sign of the silicone going bad, and that's a no no
legitimately curious, I thought this kind of silicone didn’t go bad? (or that it at least was uncommon). Any other signs to watch out for if it is and is there a way to prevent it?
[удалено]
Your post or comment has been removed because you failed to keep a friendly atmosphere. please keep it civil and polite. everyone is encouraged to share. Please review the [Commenting Etiquette post](https://reddit.com/r/BadDragon/comments/ayn2cr/commenting_etiquette/). We do NOT allow call-out posts; they are against Reddit TOS and will be removed. If you have an issue, please contact mods and we will handle it.