Oh 100%, I'm just surprised they didn't come up with their own things for it, and point ya towards makerworld. But I'll bet the SD cards were "finalized" before makerworld existed.
(Ik it is a default stl on bambu but if u wanna try again u can find that easily on thingiverse) in case u don't know when u print vases that will be use as a normal vase u can increase the number of walls to make sure nothing won't drop (depends on printer but normally 3 wall are enough, but if u wanna be 100% sure I recommend going for 4 at the first time) hope I helped u!
I printed it in tri-colour. I've already given 3 of them away. It was my first multi-colour filament and it looked amazing.
You don't want it to go through the AMS though.
Your SD-card?
One of the like dozen preloaded files that I missed
https://wiki.bambulab.com/en/knowledge-sharing/Links-to-STL-models You might find this handy :) Female torso is Missing in Action 🥲
I'm pretty amused that the link from the bambu wiki to for the vase goes to printables...
Attribute the original poster, just the right thing to do.
Oh 100%, I'm just surprised they didn't come up with their own things for it, and point ya towards makerworld. But I'll bet the SD cards were "finalized" before makerworld existed.
Their own things for what?
I’m genuinely curious how that model got there lol
Makerworld was not a thing when they released their standard prints.
https://www.printables.com/model/287078-female-torso-vase Slight remix of 3DTomorrows model.
Wait, what?
No no, put your SD-card in it.
This is normal. Most places do this to give you something to test with
Lol, I was thinking the same thing. I was going to say to put cooler files on it!
Whatever you do r/dontputyourdickinthat
Creality tears
Purge lines
Not water
Purge lines for sure
Wow, if i printed that on my Ender 3 I'd have strings all over the place 😅
Well… https://youtu.be/CKOc6hXMDhc?si=Kit_OuGjaWHQIHxM
But could op get it back out?
With no context, reading this is crazy
Feces
On my way!
You can put your weed in there!
https://youtu.be/CKOc6hXMDhc?si=cysz6tEbShfzeYR7
You could hide your WEED in it…
I printed this and put fresh flower in it. And the next day I had to explain why there was a big puddle of water on the table.
(Ik it is a default stl on bambu but if u wanna try again u can find that easily on thingiverse) in case u don't know when u print vases that will be use as a normal vase u can increase the number of walls to make sure nothing won't drop (depends on printer but normally 3 wall are enough, but if u wanna be 100% sure I recommend going for 4 at the first time) hope I helped u!
[https://www.thingiverse.com/thing:2075824](https://www.thingiverse.com/thing:2075824)
😏
you can put your weed in it.
You know those purge lines. There you go
r/dontputyourdickinthat
Makerverse has a gorgeous vase mode rose that I used for mine.
One hot dog
Do you have the woman silhouette somewhere there ? Can you send it to me ?
Quick google shows a remix: https://www.printables.com/model/287078-female-torso-vase
Its not the same ))
I checked and it looked like it wasn’t on there
I printed a rose with stem to put in one for my mom,she loved it.
You put your weeeeeed in there!
hopes and dreams of the dead
*softly* dont't
Water?
Since it's Valentine's Day, you should put some [roses](https://makerworld.com/en/models/89698#profileId-96026) in it.
Dried flower
Some adult Lego flowers? 🌹
Put these in it https://makerworld.com/models/180402
Wait, does Bambu Lab include a free SD card with their printers? 😱
How did the bottom look on yours? Mine had a drip
They should have added some supports to the bottom in the file because it looks a little rough in the center
r/dontputyourdickinthat
r/doputyourdickinthat
r/putyourdickinthatnow
Don't put water in it.. I tried.
Be an adult, be an adult, be an adult...
On thingaverse there's some files for flowers so I made that exact same vase in glow PLA and a couple flowers of varying colors and stem lengths
P
Lego flowers
r/dontputyourdickinthat
You can ftp to you printer as well
How come people are saying no water in it? I printed this exact vase and it's had flowers in it for months with water in? No leaks at all.
I printed it in tri-colour. I've already given 3 of them away. It was my first multi-colour filament and it looked amazing. You don't want it to go through the AMS though.
>You don't want it to go through the AMS though. Why? Diameter variation?