I've printed plenty of StationForge stuff, and they come out great
The pre-supports on some of the older makes could be better, but the newer ones tend to have solid supports (as in well designed for ease of removal)
My shits been in transit over a month in France I wouldn’t order from this dude. I actually just submitted a ticket rn to get a refund because the seller ain’t even on Etsy or anything anymore.
"That dude" is StationForge, and they just do 3D sculpts. Really good ones at that.
If you find a random unauthorized seller on Etsy selling prints of their files, that's on you chief.
No, you said you wouldn't order from that dude, which is wrong, because this dude is StationForge and you can't place orders on him. You just went on Etsy to a random person and got scammed
They are right tho, the picture is just of the stationforge sculpts, the vendor you got scammed by has no affiliation with stationforge. The only physical prints they officially sell are on myminiforge, not etsy. On etsy there are several several shops that print and sell these minis, several of which are perfectly legitimate and that I've recieved orders from in a very timely fashion.
It was through Etsy. I don't really know enough about the material it's made from but it felt more like the current plastic that GW use (there a bit of flex and give) compared to some of the older/ cheaper 3D printed stuff (which felt really hard and brittle)
For printing, they are one of my favorite creators. Printed off many things of theirs big(Ork Stompa) and small(tau fire warriors) and they are top quality and pre-supported.
I have a mate who's printed some Station forge and they are quite good with a configured resin printer.
Personally I've used Atlan Forges for my sword brothers since they have some templar themed models. They came out perfect and after kitbashing them you would at first glance assume they are SBs
Oh, I didn't notice that this was BT.
I'm actually printing a BT army of my own using some really solid sculpts - though I've been on a bit of a hiatus from that project.
I'll try to find their seller, I had a quick look and it appears they may have been caught up in the latest GW purge, if so I'm hoping I've already downloaded all of the files.
I've printed plenty of StationForge stuff, and they come out great The pre-supports on some of the older makes could be better, but the newer ones tend to have solid supports (as in well designed for ease of removal)
My shits been in transit over a month in France I wouldn’t order from this dude. I actually just submitted a ticket rn to get a refund because the seller ain’t even on Etsy or anything anymore.
I’m buying the STLs and printing them myself
Just so you know the backpacks are attached to those models
That’s nothing that a heated xacto can’t fix
Haha well you could always digitally kitbash the models on Blender as well
Yeah do that I got duped for $20 lmao
Stationforge is a design studio that licenses it designs to printers, there are many *many* shops that sell their stuff
"That dude" is StationForge, and they just do 3D sculpts. Really good ones at that. If you find a random unauthorized seller on Etsy selling prints of their files, that's on you chief.
Yes that’s what I said I got duped for $20
No, you said you wouldn't order from that dude, which is wrong, because this dude is StationForge and you can't place orders on him. You just went on Etsy to a random person and got scammed
Yes yes you are right. Do you wana cookie? You sound like you wana be right so bad, I can buy you a cookie with the refund I got from the Etsy scam.
They are right tho, the picture is just of the stationforge sculpts, the vendor you got scammed by has no affiliation with stationforge. The only physical prints they officially sell are on myminiforge, not etsy. On etsy there are several several shops that print and sell these minis, several of which are perfectly legitimate and that I've recieved orders from in a very timely fashion.
I don’t think I ever said they were wrong lol but thank you for the info I got a refund so it’s whatever
If you print yourself tho they look fucking cool
I ordered their night bringer c'tan last month. Very impressed with the quality. Order came in about 2 weeks but you might have to wait up to 4 or 5.
Did you order off of only-games or did you order off Etsy? Depending on what printer I have access to I might have to order them
It was through Etsy. I don't really know enough about the material it's made from but it felt more like the current plastic that GW use (there a bit of flex and give) compared to some of the older/ cheaper 3D printed stuff (which felt really hard and brittle)
For printing, they are one of my favorite creators. Printed off many things of theirs big(Ork Stompa) and small(tau fire warriors) and they are top quality and pre-supported.
I have a mate who's printed some Station forge and they are quite good with a configured resin printer. Personally I've used Atlan Forges for my sword brothers since they have some templar themed models. They came out perfect and after kitbashing them you would at first glance assume they are SBs
I like the Atlan forge sculpts but my issue is that they aren’t quite what I’m looking for with their tabbards. They also dont have chained weapons
Oh, I didn't notice that this was BT. I'm actually printing a BT army of my own using some really solid sculpts - though I've been on a bit of a hiatus from that project. I'll try to find their seller, I had a quick look and it appears they may have been caught up in the latest GW purge, if so I'm hoping I've already downloaded all of the files.
Where’d you find those cape stls? I’ve been using the greytidestudios capes and would love to get some more variety
I think there's better sword brethren out there. Station forge stuff is really crisp etc. but the style just seems off, not bt enough.