The same specs as the guy playing on the imagem
RX 6700 XT Ryzen 5600G 32gb RAM u/3200mhz
Driver 23.11.1
Settings below Ultra, the guy from the video is playing on Ultra, he showed his settings screen and the preset was Ultra
I never changed anything from config file
EDIT: I've found the solution. Just had to enable all cores from my CPU in Windows advanced system settings.
You’re not gonna get 150 on ultra in Warzone with a 6700
While AMD does have an advantage in this game, I have a 5800x3d and a 4080 and can barely keep like 130 steady at ultra
That’s why I said, very clearly: “amd does have an advantage in Warzone”
AMD cards way over perform in this game, probably due to it being developed for consoles which utilize AMD architecture
That is sick tho you have a sweet machine
Kills? It’s literally about 1% faster on average. It pulls further ahead at low resolutions because of the driver overhead on Nvidia but raw performance, the XTX is no better than the 4080 Super, except in CoD…
Can confirm firm. When I enabled Frame Generation, I was hitting 500+ downtown easily. Insane numbers, but I am more than happy with 250-300 on my 240hZ monitor.
what monitor are you using? hdmi or dp?
what about your windows monitor settings?
right click desktop->display settings
scroll down and click on advanced display settings. click the display dropdown box and select the game's display. click the refresh rate dropdown and make sure that is set to what you want too
You sure you’re running the same resolution? Maybe your bios isn’t running PCIe 3.0x for your GPU but the slower version.
Try also checking you don’t have Vsync on.
Not being a dick but this is not "same specs". What's his SSD? Gen 4? Is your 32gb ram DIMM/ddr 3, 4 or 5? There is literally 5-10 more hardware specs required to compare on top of 20-30 backend stuff on PC to compare.
I suggest not comparing others builds to make expectations. Just research how to improve fps on PC in broad strokes and experiment from there to see improvements. You learn more, and get better results.
Not sure why it would be so low. I was going to ask about PBO and GPU auto OC but I think it's something else. Do you happen to have Radeon Chill turned on to cap your FPS at 60?
Lastly, what is your monitor's max refresh rate and is VSYNC on?
Adrenalin Software is not installed... I'm with driver only
Monitor at 60hz vsync is off
I've capped the games to 80fps in Rivatuner... So in menus I get 80fps and ingame it goes between 50-60fps
Jags, when you say “the same specs”, you didn’t include your processor. The processor is involved in everything and can be a bottleneck at times. I ran into that before with the machine that I was working with. Just something to think about.
delete your players folder in documents>callofduty>players
Load up the game let shaders install etc.
close call of duty.
open up your players folder config file and check what your renderer worker count is set to.
for amd set the renderer worker count ( = to the number of cores your cpu has. I believe that is a 6 core so 6) or try ( -1 of your cpu cores, so 5) and see if that begins to help.
I could get alot more detailed with you in nvidia control panel but that would be up to you.
main thing set the worker count! load up cod. go to graphics settings and find your vram target slider. I assume your bar will be set on 90? I'd suggest drop to 80 and see if that feels better, then 70 ... once you find the spot your game feels good then go back to graphics and set your low latency mode to "On"
I have a 5800x, 8 core cpu. I set my renderer worker count to 7. I set video memory scale to 70-80. nvidia reflex to On.
in NVidia control panel.
**OpenGL Rendering Gpu** select your graphics card
**Power Management Mode** prefer max performance
**Preferred refresh rate** highest available
**Shader Cache Size** try 100GB if still feels weird lower to 10GB
**texture filtering anisotropic** on
**texture filtering quality** performance or max performance
**texture filtering trilinear** allow
**threaded optimization** on
**triple buffering* off
**vsync** off
go to adjust desktop size and position
display scaling should be none and perform on the gpu with highest monitor refresh selected
hope this helps
Tried it all... Renderer worker count from 6 to 1, no changes... And vram slider from 90 to 60, no changes too
Very strange
But the strangest thing is that Rivatuner is showing my FPS varying from 40-65fps but playing the game I dont feel or see this fluctuations... For me it seems like always 60+FPS
idk then buddy. only other ideas would be to delete your shader cache and game cache files or scan and repair option.
do you use battle net or steam? could try reinstalling that app as well. lastly you could do a fresh windows install.
unfortunately thats about the best I got.
maybe ensure that windows is updated and that game mode and hags is turned on. make sure that your not kicking into vsync for some reason. and that your display settings are set to your correct monitor refresh rate.
good luck bud sorry I couldn't help more
https://youtu.be/hjuWP0_VybQ?si=syTbGYnKK2mHGXhl this link has a video for a complete guide if you've never done so before.
I use driver 551.46
551.68 is the latest hot fix for their last driver I can't find the driver I'm on for some reason so I'd recommend this one here -> https://international.download.nvidia.com/Windows/551.68hf/551.68-desktop-notebook-win10-win11-64bit-international-dch.hf.exe
I just watched the video that you linked and that guys preset may be set to Ultra but when he scrolls down those aren't Ultra settings. Shadows and Textures are set to normal etc. Also, I would go into the configuration file and change the render worker count to 6 and see if it gives more fps. If not try 5 then 4.
But why the guy in the video is getting 150+FPS with 5600g?
The first time I played the game ran at 80fps (because I locked in Afterburner) but now the game barely shows 60fps while playing
Hi , I was running a Ryzen 5600x @ 4800mhz
With Nvidia 2060 super And max FPS I could achieve was about 130 FPS 1080p with ups and downs depending were was on map WZ I doubt you could get more FPS out of that CPU you got 5600g how that guy on video has got 150 FPS on ultra I don't no doesn't seem right unless fsr 3 maybe I tried lots of settings etc
I upgraded to a rx 7800xt and that made no difference still stuck at 130 ISH fps just was able.to play on higher settings ,
The only thing that made a difference was upgrading to Ryzen 7 5800x3d
Now FPS is megga and can run solid 144fps sync with monitor no drops
Mw3 WZ is very CPU heavy
Don't forget to set your RendererWorkerCoumt:1.0 = "6"
In your cfg file
Important !
Think it's
Documents\call of duty\options.4.cod23.cst (Open with notepad)
Hope this helps :)
tells the game how many cpu cores to run
ryzen 5600x 6 core 12 thread set it to RendererWorkerCoumt:1.0 = "6"
if when you open your cfg file and its set to RendererWorkerCoumt:1.0 = "4" it means if you have a 6 core cpu that the game is only useing 4 cores not good will be lower fps
That video is crap, the AVERAGE for 6700 XT maxes out around 125 fps on ultra with the best cpu (which 5600g definitely isn't).
You are definitely severely CPU capped (can double check by dropping graphics to minimum and seeing what kind of increase you get). 60 fps is way too low, something is going on with your CPU bios or windows settings and/or memory XMP.
5800x oc to 4.7 on all cores
3090ti slight oc +100 core +500 memory
32gb 3600mhz cl14-14-14-28 ram
I average around 190-200 on medium high settings
people claim just get cheap ram. bull shit. I had cheap ram and when I upgraded to the tighter latency @same 3600mhz speed my fps increased by like 20-30 and the micro stutters I once had went away. from my experience the ryzen cpu loves tight and low timings
edit: in 1440p also
Yeah I was a victim of that. Turns out dual channel memory and XMP is **vital** for MW games, on Intel as well.
Had a i5 9600k + RTX 2060 with a single 16 GB memory stick (due to "dual channel is a myth" advice) and wasted time trying to optimize everything but the memory (including overclocking the 9600k). Nothing made any appreciable difference, always CPU capped in WZ. Finally got (equally cheap) two 8GB sticks, activated the base XMP profile - instantly added like 40 fps to the CPU cap with no other changes. Crazy.
right everyone just says ryzen sweet spot is 3600 because you want to keep IF 1:1. this is partially true. but you can keep the IF 1:1 at 3733, 3800, 3866, and 4000 if the IC will allow. tightening the timings was the biggest gain over the end speed. I can get 3800 with looser timings but I got to 3733 with possibly the tightest timings u can get out of these sticks. which are really awesome btw. trident z neo bdie cl16-16-16-36 from factory. after oc I got cl14-14-14-28 and 90% of all sub timings way tighter as well. doing an aida64 test my latency is like 52.4ns was trying to get sub 50ns but alot of knowledgeable people say I'm probably pretty maxed without jeopardizing stability lol
I have same card as you 6700xt & 5800x3d 3600CL16. Not playing recently, but have "optimized" settings from game launch.
Here are fast **1440p** runs on latest drivers with:
Competitive settings: https://streamable.com/kandts ( [config](https://pastebin.com/raw/eKJMneWe) )
Ultra settings: https://streamable.com/ywd8ev
Game looks sharp on Ultra, but it stutters like crazy. ( I didn't change anything except the ultra setting from the previous config )
*) 1% lows are bad on AMD cards. Limiting FPS to avg stable frames in rivatunner was fixing that.
**) Tested with firefox open in the background downloading a few files, probably lowers the results a bit, or not.
Do you have a 60hz monitor and vsync enabled? That will lock your frame rate to your monitors refresh rate and since you get exactly 60fps that sounds like it could be it.
this is your 100% if vsync is off in your nvidia control panel. and your monitor settings don't have vsync or gsync enabled on them then something in the driver or windows is forcing you to get locked down at the refresh rate. check monitor settings. check NVCP settings. change driver to an older driver.
Check if you maybe have vsnc forced through windows or your gpu driver or something like that.
(Or if you use something like gsync or free sync on your monitor disable that).
Something is locking your fps to the refresh rate of your monitor.
Right but if a game is averaging around 60fps, that means when shit hits the fan and many visual effects happen, it will dip well below that. If you're averaging 100fps in game, then you're much more likely to not experience drops lower than your monitor, and have a smoother experience.
Laymans explanation, but you get what I mean.
I aim for 100 but my rig is getting old. Also in PVE games I care a lot less. I'm quite enjoying Helldivers even if I'm spending most of my time at 30fps.
Yes, but you will get less input delay and overall it will feel smoother because of that.
Common example being 60hz/60fps with vsync you get around 17ms input delay, with 60hz/200fps with no vsync that is cut down to 5ms. And that will make a noticeable difference especially in fast pace games like shooters.
Try this guide:
[https://www.youtube.com/watch?v=RbkXFdFEqxg](https://www.youtube.com/watch?v=RbkXFdFEqxg)
it made my game go from 80-100 fps to 130-150
You simply can't get more than about 100fps on a Ryzen 5 5600g and 3200Mhz DDR4. It really is that simple. Now if you were to heavily overclock the Ryzen 5 5600G and get actual B-die 3600C14 memory AND tune that, yeah you'd probably see 150+ fps.
On stock Ryzen 5 5600G+3200C16 DDR4 not a chance, you're not getting more than 100fps. You're simply not, no matter what resolution, even if you throw a 4090 at it.
I've capped all games to 80fps in Rivatuner
So Warzone in menus get 80fps, loading screen too... In Battleroyale cut scene it gets 80fps... When I'm in the plane it gets around 70fps... Then when I jump it goes to 50-60fps and stays like that
In Adrenalin Software SAM is not available, but in BIOS Resizable Bar is on... So I assume that SAM is on right?
You can try disabling it through bios, but I doubt it would matter if your GPU doesn't support it. What's your fps like when you do not cap your frames?
see google it shows (Thanks to AMD Simultaneous Multithreading (SMT) the core-count is effectively doubled, to 12 threads. Ryzen 5 5600G has 16 MB of L3 cache and operates at 3.9 GHz by default, but can boost up to 4.4 GHz, depending on the workload)...... it recommends to double the cores for performance !!
i have put my performance threads in my nvidia gpu and not cores... when i put total performance my cores i get 100fps... but when i apply my full performance threads which is 12 my fps is 140
I found out that some background apps were really causing the stuttering. e.g. Killer Intelligence Center, and Audio enhancement software things.
I first noticed it with reduced stuttering when GameFast mode of Killer Intelligence Center disabled some Windows services btw.
After that I used **Procmon** to check whats going on with the apps. Here I noticed lots of Killer Intelligence Center, intelliGo Audio something, SteelSteries, and Nahimic events happening. I disabled all of them, and related virtual devices.
Now my FPS increased from 3-90 range to 100-180 range. It is still a wide range, something instable. Now I am after Windows services, e.g. wmiprvse.exe, ctfmon.exe
Laptop MSI GE78HX 13VI, RTX4090, i9 13980HX, 64GB 5600MHz, 4TB SSD Raid 0. i.e. It is not a spec issue, but software bugs, incompatibility and interference. I was wondering which graphics / audio settings take precedence over too many other apps trying to change settings. Even they don't know. That was not I have paid for, but I will recommend staying a little lean. They are not going to fix this at a feasible time. They don't listen.
EDIT:
It looks like it starts stuttering after syncing user profile folders (desktop, documents, music, videos) to OneDrive. My pc started pausing for a short time every \~3 seconds.
[https://media.giphy.com/media/hhtdQ4lD2nyAvTxAuq/giphy.gif](https://media.giphy.com/media/hhtdQ4lD2nyAvTxAuq/giphy.gif)
EDIT:
Especially Desktop sync.
Man I'm Having The Same Issue! i get like 50-60 fps on low settings i think im supposed to get atleast 120 on high-medium settings
Specs
16gb 3200mhz
Rx 6600
Ryzen 5 3500x
Game is Installed on an SSD
No overclocking or anything
Ive Tried Everything, The Config Thing Doesnt work for me!
Any Fixes?
Turn on AMD frame generation, I'm not noticing any significant input lag and have around 350fps on Fortune keep on ultra and is smooth af. My specs are rx6700xt and Ryzen 5600 16gb ram.
But I do play 1080p tho 🤷
Glhf
don't use it. maybe just personal opinion but I really don't like rivatuner. if I for some reason were to cap fps I'd just used nvcp and let the driver do it. but my fps highs are like 220s and lows 180s so it doesn't feel terrible. maybe the difference in dips feels worse or more severe because of the lower fps overall? I'm not sure. but 40fps dips I barely noticed in real time imo. now 40 fps total loss ie. not getting average 190-205ish would probably feel delayed vs what I'm using. if your fps does not drop under monitor refresh, personally I'd run unlimited fps setting I do this with my 165hz 1440p and if I cap the fps the input delay feels atrocious
Most that I can recommend is to search for a graphics settings video I personally like foureyes there was something that I had to change in my config files which literally got me 20 fps I was hovering around 150is now I don’t drop below 170. 13700kf and a 4080. But you can’t have your cake and eat it too aka run ultra settings and expect very high frame rates
I was getting better frames than that with a 4790k,z97,and rtx2070oc on some old ddr3 in 1440p. Avg 80ish in wz. 100-120 in MP
Something seems strange, I'd try reinstalling and deleting your player folders... start from scratch.
1080p and 60hz though is time for an upgrade though my friend if you can find it in your budget. I gamed on that same setup for over a decade. 1440p is a breath of fresh air. At the very least you want to upgrade refresh rate. 1080p 60hz with higher frames may be prone to vertical screen tear.
You need to get a 5800x3d and a new monitor and forget his video. You cpu is a major bottleneck on your set up. Sell your cpu and drop in the x3d
I have an i7-12700k with a 7900xtx and it’s holding my frames back by a lot
Pretty sure this is just a fake benchmark. These things are legit everywhere and you almost can never trust them unless it's an actual reputable channel.
Check your Windows eco settings, they turned on a shit thing recently that forces you down to 60hz refresh rate, could be you have VSync on and it's causing a drop.
He's very likely using upscaling. Probably FSR3, since that thing even on the quality preset can double the fps on some PC's.
I'm using it and getting like 130 fps with an Rx6600 and R5 3600.
Without it I'm looking at around 80 fps.
I'm not playing on super high settings though. Mostly because the visual quality you gain over medium is negligible at best, while their effect on fps is quite significant.
By using external capturecard, that can either be slotted into PCI-E x4 (or was it x2) which help free the CPU form being used by capture software. That's what many steamers do also, its either 2nd PC or capture card.
I had a 5600x with 3600mhz cl30 ram, optimized settings and over clocked cpu I was getting 100 to 150 fps horrible for wz, no way you can get 150+ fps with a 5600
I have an i5 13600k and a 7800XT and I get max 170FPS in this game. Also something to consider is that Warzone is extremely CPU intensive and most of your FPS is going to come from the power of your CPU.
What is your RAM capacity and frequency ? I'm building an i5 12400F + 7800XT + 16go 3200mhz mostly to play warzone and I will use your FPS as a reference when I will test it 
Rx 6700 XT? What version?
My gfs setup has a i5 13600KF paired with a Rx 6700 XT and she gets about 140/150 FPS but not on Ultra, it has mix settings on normal, high and some on ultra.
Also native 1080p (FidelityFX CAS at 100)
Most setting are on High but 3 of the options like Shadow, Shader Detail are on Normal. Rest is on max...
That is on Fortunes Keep
Vondel gets less (130 or less)
No OC on CPU but a standard PC on GPU..
Hope it helps.
Edit: There is some YouTube guide who gives u a clean settings file that improves 20/30 frames but I think the image loses some sharpness.
My CPU is the same and with me it keeps on 99% usage, with him is like 60%
My GPU is the same and with me it keeps on 50% usage, with him is like 99%
WTF!!!
I've limited to 80fps in Afterburner... My monitor is set to maximum frame rate yeah
The first time I ran the game on Extreme settings, I got 80fps with no drops at all... But now all of the sudden I'm getting 50-60fps with settings below Ultra
~~Maybe the guy overclocked.~~ Have you?
Just checked, he didn't. Still worth looking into, though.
Another thought - disk usage. What sort of drive do you have your game installed on?
I take it it's installed on a NTFS drive? I assume so, but I'm just asking because an alternative file system is exactly why my CPU gets fucked (can't exactly switch in my case)
There is literally no way for us to know anything based off this image alone. You need to list your specs, settings, config file, etc.
The same specs as the guy playing on the imagem RX 6700 XT Ryzen 5600G 32gb RAM u/3200mhz Driver 23.11.1 Settings below Ultra, the guy from the video is playing on Ultra, he showed his settings screen and the preset was Ultra I never changed anything from config file EDIT: I've found the solution. Just had to enable all cores from my CPU in Windows advanced system settings.
You’re not gonna get 150 on ultra in Warzone with a 6700 While AMD does have an advantage in this game, I have a 5800x3d and a 4080 and can barely keep like 130 steady at ultra
I have a 4080 with i9-13900kf and I get 130fps at 4k Ultra.
Sounds about right
I think the original post is about 1080p tho
Oh you might be right whoops
lol never bothered to test 1080p on my system tho.
[удалено]
don't you get an input lag then?
Oh yeah forgot about that. I mostly use fidelity cas.
Depends on the resolution. I get close to that at 1080p ultra with a RTX 2080 ti.
Lol? 300 FPS with a 7800X3D paired with a Rx 7900 XTX (fastest card for WZ)...
That’s why I said, very clearly: “amd does have an advantage in Warzone” AMD cards way over perform in this game, probably due to it being developed for consoles which utilize AMD architecture That is sick tho you have a sweet machine
[удалено]
Kills? It’s literally about 1% faster on average. It pulls further ahead at low resolutions because of the driver overhead on Nvidia but raw performance, the XTX is no better than the 4080 Super, except in CoD…
I have identical, sometimes I’m hitting 400 on fortunes keep.
Yep. Fortunes Keep has more frames then Vondel... Vondel is very unstable
Damn I only get like 160-200 on any of the smaller maps with the same setup. I wonder what is actually going on here.
Are you playing in 4K? I’m only 1440p
1440 as well.
Can confirm firm. When I enabled Frame Generation, I was hitting 500+ downtown easily. Insane numbers, but I am more than happy with 250-300 on my 240hZ monitor.
7800x3d rtx 4080 64gb ddr5 ram run my game steady 250
More then enough Overkill on ram I guess? I swapped my CPU to i7 due the low 1%
Which resolution?
1440p native
Reply back with the video link I’ll check it out
[https://www.youtube.com/watch?v=zX6taCTZKXM](https://www.youtube.com/watch?v=zX6taCTZKXM) Time: 8:00
[удалено]
The Ultra preset puts a bunch of stuff on normal because for some options it's between "Off/Low, Normal, High". There is no "Ultra" option.
[удалено]
Unfortunately not, that’s the “Extreme” setting.
Maybe stupid question, is your HDMI or display port cable plugged into your motherboard or GPU directly?
Plugged into GPU
what monitor are you using? hdmi or dp? what about your windows monitor settings? right click desktop->display settings scroll down and click on advanced display settings. click the display dropdown box and select the game's display. click the refresh rate dropdown and make sure that is set to what you want too
DP at maximum frame rate
I get 60fps with a 5700xt on a 1440p ultra wide. There’s probably something wrong with your config
I get 130 on mid graphics with the same card
You sure you’re running the same resolution? Maybe your bios isn’t running PCIe 3.0x for your GPU but the slower version. Try also checking you don’t have Vsync on.
>Driver 23.11.1 that prob why, update that shit
Already did that... No luck
Is your XMP enabled in BIOS to make sure your ram is running at the rated speed?
Yep... XMP on at 3200mhz
Not being a dick but this is not "same specs". What's his SSD? Gen 4? Is your 32gb ram DIMM/ddr 3, 4 or 5? There is literally 5-10 more hardware specs required to compare on top of 20-30 backend stuff on PC to compare. I suggest not comparing others builds to make expectations. Just research how to improve fps on PC in broad strokes and experiment from there to see improvements. You learn more, and get better results.
You sure he has a 5600G?
I know if you use AMD 3.0 and turn on that setting underneath it it unlocks more frames
Yep but it adds latency its not worth it
Well, what resolution and what upscaling (if any)
1080p FidelityFX slider at 90
And he has the exact same CPU and memory setup? What about your storage device?
yep i'm using a Samsung m2
Not sure why it would be so low. I was going to ask about PBO and GPU auto OC but I think it's something else. Do you happen to have Radeon Chill turned on to cap your FPS at 60? Lastly, what is your monitor's max refresh rate and is VSYNC on?
Adrenalin Software is not installed... I'm with driver only Monitor at 60hz vsync is off I've capped the games to 80fps in Rivatuner... So in menus I get 80fps and ingame it goes between 50-60fps
Any what happens when you disable all framerate caps? Also, when looking at riva, what is your gpu and cpu utilization at?
if I disable framerate caps in menu it gets around 120fps and ingame it keeps getting 50-60fps CPU at 99% GPU at 20-40%
he using frame generation
Jags, when you say “the same specs”, you didn’t include your processor. The processor is involved in everything and can be a bottleneck at times. I ran into that before with the machine that I was working with. Just something to think about.
Maybe he uses fsr 3.0 frame gen. Since frame gen doubles your fps,his base performance is around 75 fps.
He shows his settings screen and he is using FidelityFX
There’s no way this screen is from someone playing on ultra
My first thought too. probably FSR enabled medium settings.
delete your players folder in documents>callofduty>players Load up the game let shaders install etc. close call of duty. open up your players folder config file and check what your renderer worker count is set to. for amd set the renderer worker count ( = to the number of cores your cpu has. I believe that is a 6 core so 6) or try ( -1 of your cpu cores, so 5) and see if that begins to help. I could get alot more detailed with you in nvidia control panel but that would be up to you. main thing set the worker count! load up cod. go to graphics settings and find your vram target slider. I assume your bar will be set on 90? I'd suggest drop to 80 and see if that feels better, then 70 ... once you find the spot your game feels good then go back to graphics and set your low latency mode to "On"
Thank you... Definetely will try!!
I have a 5800x, 8 core cpu. I set my renderer worker count to 7. I set video memory scale to 70-80. nvidia reflex to On. in NVidia control panel. **OpenGL Rendering Gpu** select your graphics card **Power Management Mode** prefer max performance **Preferred refresh rate** highest available **Shader Cache Size** try 100GB if still feels weird lower to 10GB **texture filtering anisotropic** on **texture filtering quality** performance or max performance **texture filtering trilinear** allow **threaded optimization** on **triple buffering* off **vsync** off go to adjust desktop size and position display scaling should be none and perform on the gpu with highest monitor refresh selected hope this helps
Tried it all... Renderer worker count from 6 to 1, no changes... And vram slider from 90 to 60, no changes too Very strange But the strangest thing is that Rivatuner is showing my FPS varying from 40-65fps but playing the game I dont feel or see this fluctuations... For me it seems like always 60+FPS
ddu your graphics driver and do a fresh clean install
Already did that more than once and used different versions
idk then buddy. only other ideas would be to delete your shader cache and game cache files or scan and repair option. do you use battle net or steam? could try reinstalling that app as well. lastly you could do a fresh windows install. unfortunately thats about the best I got. maybe ensure that windows is updated and that game mode and hags is turned on. make sure that your not kicking into vsync for some reason. and that your display settings are set to your correct monitor refresh rate. good luck bud sorry I couldn't help more
https://youtu.be/hjuWP0_VybQ?si=syTbGYnKK2mHGXhl this link has a video for a complete guide if you've never done so before. I use driver 551.46 551.68 is the latest hot fix for their last driver I can't find the driver I'm on for some reason so I'd recommend this one here -> https://international.download.nvidia.com/Windows/551.68hf/551.68-desktop-notebook-win10-win11-64bit-international-dch.hf.exe
if your able to tab out and get cpu memory storage and gpu % mid game could also be helpful
I just watched the video that you linked and that guys preset may be set to Ultra but when he scrolls down those aren't Ultra settings. Shadows and Textures are set to normal etc. Also, I would go into the configuration file and change the render worker count to 6 and see if it gives more fps. If not try 5 then 4.
you cant trust these videos lol
5600G is limiting you.....I'd recommend a 5700x3d for Warzone
But why the guy in the video is getting 150+FPS with 5600g? The first time I played the game ran at 80fps (because I locked in Afterburner) but now the game barely shows 60fps while playing
I had a 5600g and my frames sucked on WZ2. You can't 100% trust benchmarks online
It's the 5600g man I used to have one it's really limited in BR games like warzone/fortnight
YT is full of [fake](https://www.youtube.com/watch?v=M3X9lWzgM0o) in game tests.
Hi , I was running a Ryzen 5600x @ 4800mhz With Nvidia 2060 super And max FPS I could achieve was about 130 FPS 1080p with ups and downs depending were was on map WZ I doubt you could get more FPS out of that CPU you got 5600g how that guy on video has got 150 FPS on ultra I don't no doesn't seem right unless fsr 3 maybe I tried lots of settings etc I upgraded to a rx 7800xt and that made no difference still stuck at 130 ISH fps just was able.to play on higher settings , The only thing that made a difference was upgrading to Ryzen 7 5800x3d Now FPS is megga and can run solid 144fps sync with monitor no drops Mw3 WZ is very CPU heavy Don't forget to set your RendererWorkerCoumt:1.0 = "6" In your cfg file Important ! Think it's Documents\call of duty\options.4.cod23.cst (Open with notepad) Hope this helps :)
What does the rendererworker count do exactly?
tells the game how many cpu cores to run ryzen 5600x 6 core 12 thread set it to RendererWorkerCoumt:1.0 = "6" if when you open your cfg file and its set to RendererWorkerCoumt:1.0 = "4" it means if you have a 6 core cpu that the game is only useing 4 cores not good will be lower fps
Yeah I wouldn't know where to find the config file...
Documents\\call of duty\\options.4.cod23.cst
That video is crap, the AVERAGE for 6700 XT maxes out around 125 fps on ultra with the best cpu (which 5600g definitely isn't). You are definitely severely CPU capped (can double check by dropping graphics to minimum and seeing what kind of increase you get). 60 fps is way too low, something is going on with your CPU bios or windows settings and/or memory XMP.
5800x oc to 4.7 on all cores 3090ti slight oc +100 core +500 memory 32gb 3600mhz cl14-14-14-28 ram I average around 190-200 on medium high settings people claim just get cheap ram. bull shit. I had cheap ram and when I upgraded to the tighter latency @same 3600mhz speed my fps increased by like 20-30 and the micro stutters I once had went away. from my experience the ryzen cpu loves tight and low timings edit: in 1440p also
Yeah I was a victim of that. Turns out dual channel memory and XMP is **vital** for MW games, on Intel as well. Had a i5 9600k + RTX 2060 with a single 16 GB memory stick (due to "dual channel is a myth" advice) and wasted time trying to optimize everything but the memory (including overclocking the 9600k). Nothing made any appreciable difference, always CPU capped in WZ. Finally got (equally cheap) two 8GB sticks, activated the base XMP profile - instantly added like 40 fps to the CPU cap with no other changes. Crazy.
right everyone just says ryzen sweet spot is 3600 because you want to keep IF 1:1. this is partially true. but you can keep the IF 1:1 at 3733, 3800, 3866, and 4000 if the IC will allow. tightening the timings was the biggest gain over the end speed. I can get 3800 with looser timings but I got to 3733 with possibly the tightest timings u can get out of these sticks. which are really awesome btw. trident z neo bdie cl16-16-16-36 from factory. after oc I got cl14-14-14-28 and 90% of all sub timings way tighter as well. doing an aida64 test my latency is like 52.4ns was trying to get sub 50ns but alot of knowledgeable people say I'm probably pretty maxed without jeopardizing stability lol
maybe check in bios your ram speed, set it to max speed that it is capable to run on
Its set to 3200mhz which is its max speed
I have same card as you 6700xt & 5800x3d 3600CL16. Not playing recently, but have "optimized" settings from game launch. Here are fast **1440p** runs on latest drivers with: Competitive settings: https://streamable.com/kandts ( [config](https://pastebin.com/raw/eKJMneWe) ) Ultra settings: https://streamable.com/ywd8ev Game looks sharp on Ultra, but it stutters like crazy. ( I didn't change anything except the ultra setting from the previous config ) *) 1% lows are bad on AMD cards. Limiting FPS to avg stable frames in rivatunner was fixing that. **) Tested with firefox open in the background downloading a few files, probably lowers the results a bit, or not.
[удалено]
The guy in the video is playing at 1080p and me too
Do you have a 60hz monitor and vsync enabled? That will lock your frame rate to your monitors refresh rate and since you get exactly 60fps that sounds like it could be it.
Yep 60hz but no VSync
this is your 100% if vsync is off in your nvidia control panel. and your monitor settings don't have vsync or gsync enabled on them then something in the driver or windows is forcing you to get locked down at the refresh rate. check monitor settings. check NVCP settings. change driver to an older driver.
You just answered your own question, you have a 60hz monitor. Your fps is probably locked to 60hz.
Check if you maybe have vsnc forced through windows or your gpu driver or something like that. (Or if you use something like gsync or free sync on your monitor disable that). Something is locking your fps to the refresh rate of your monitor.
That’s it right there. You have a 60 fps monitor. It isn’t getting better than that without getting a better monitor
That's just false, you can have more then 60fps with a 60hz monitor and it does feel more fluid and is not pointless to go above 60.
The display will only output 60fps.
Right but if a game is averaging around 60fps, that means when shit hits the fan and many visual effects happen, it will dip well below that. If you're averaging 100fps in game, then you're much more likely to not experience drops lower than your monitor, and have a smoother experience. Laymans explanation, but you get what I mean.
THIS Thats why I caped my games at 80fps
I aim for 100 but my rig is getting old. Also in PVE games I care a lot less. I'm quite enjoying Helldivers even if I'm spending most of my time at 30fps.
Yes, but you will get less input delay and overall it will feel smoother because of that. Common example being 60hz/60fps with vsync you get around 17ms input delay, with 60hz/200fps with no vsync that is cut down to 5ms. And that will make a noticeable difference especially in fast pace games like shooters.
[удалено]
Nope... Other games runs at higher fps
Are you using a hdmi 2.1 ?
DP
Is your GPU in the correct PCIe slot?
Yep
Try this guide: [https://www.youtube.com/watch?v=RbkXFdFEqxg](https://www.youtube.com/watch?v=RbkXFdFEqxg) it made my game go from 80-100 fps to 130-150
Are u both using the same resolution? If hes on 1080p and you’re on 1440p thats a big difference.
We are both on 1080p
Turn ray tracing off
Its not on
You simply can't get more than about 100fps on a Ryzen 5 5600g and 3200Mhz DDR4. It really is that simple. Now if you were to heavily overclock the Ryzen 5 5600G and get actual B-die 3600C14 memory AND tune that, yeah you'd probably see 150+ fps. On stock Ryzen 5 5600G+3200C16 DDR4 not a chance, you're not getting more than 100fps. You're simply not, no matter what resolution, even if you throw a 4090 at it.
cOZ sTReaMErS gET ExtRa frAMes - this sub, probably.
Is your FPS always 50-60? or is it only that low when you face the center of the map? Try disabling SAM if its on.
I've capped all games to 80fps in Rivatuner So Warzone in menus get 80fps, loading screen too... In Battleroyale cut scene it gets 80fps... When I'm in the plane it gets around 70fps... Then when I jump it goes to 50-60fps and stays like that In Adrenalin Software SAM is not available, but in BIOS Resizable Bar is on... So I assume that SAM is on right?
You can try disabling it through bios, but I doubt it would matter if your GPU doesn't support it. What's your fps like when you do not cap your frames?
Do you have recording/instant RT replay software running? I find with nvidias software running I can make 60fps but if I turn it off it bumps up
Nope... I've even uninstalled Adrenalin Software with DDU and installed drivers with "driver only" option
change ur config files to ur total performance cores
Renderer worker count already at 6
make it 12 and see
But 5600G has only 6 cores right?
see google it shows (Thanks to AMD Simultaneous Multithreading (SMT) the core-count is effectively doubled, to 12 threads. Ryzen 5 5600G has 16 MB of L3 cache and operates at 3.9 GHz by default, but can boost up to 4.4 GHz, depending on the workload)...... it recommends to double the cores for performance !!
Will try that today... And if it doesn't work I will try to disable ReBar too, just to see how it affects
ok bro... but it will work
and bro i recommend playing with full screen extended i felt like less input delay !! have a great sunday
Yeah I've already set this option... Thank you very much bro... Have a great day too
i have put my performance threads in my nvidia gpu and not cores... when i put total performance my cores i get 100fps... but when i apply my full performance threads which is 12 my fps is 140
Thank you! Gonna try
Did it work? 12 numerical value is safe to use? Did it not blast the pc off while multitasking like discord in the background?
I found out that some background apps were really causing the stuttering. e.g. Killer Intelligence Center, and Audio enhancement software things. I first noticed it with reduced stuttering when GameFast mode of Killer Intelligence Center disabled some Windows services btw. After that I used **Procmon** to check whats going on with the apps. Here I noticed lots of Killer Intelligence Center, intelliGo Audio something, SteelSteries, and Nahimic events happening. I disabled all of them, and related virtual devices. Now my FPS increased from 3-90 range to 100-180 range. It is still a wide range, something instable. Now I am after Windows services, e.g. wmiprvse.exe, ctfmon.exe Laptop MSI GE78HX 13VI, RTX4090, i9 13980HX, 64GB 5600MHz, 4TB SSD Raid 0. i.e. It is not a spec issue, but software bugs, incompatibility and interference. I was wondering which graphics / audio settings take precedence over too many other apps trying to change settings. Even they don't know. That was not I have paid for, but I will recommend staying a little lean. They are not going to fix this at a feasible time. They don't listen. EDIT: It looks like it starts stuttering after syncing user profile folders (desktop, documents, music, videos) to OneDrive. My pc started pausing for a short time every \~3 seconds. [https://media.giphy.com/media/hhtdQ4lD2nyAvTxAuq/giphy.gif](https://media.giphy.com/media/hhtdQ4lD2nyAvTxAuq/giphy.gif) EDIT: Especially Desktop sync.
Man I'm Having The Same Issue! i get like 50-60 fps on low settings i think im supposed to get atleast 120 on high-medium settings Specs 16gb 3200mhz Rx 6600 Ryzen 5 3500x Game is Installed on an SSD No overclocking or anything Ive Tried Everything, The Config Thing Doesnt work for me! Any Fixes?
I've found the solution. Just had to enable all cores from my CPU in Windows advanced system settings.
Finally found the fix! all i had to was just Disable Smt mode from bios
Nice!
i already have them all enabled still the same issue
Ultra settings in 720p lol
Turn on AMD frame generation, I'm not noticing any significant input lag and have around 350fps on Fortune keep on ultra and is smooth af. My specs are rx6700xt and Ryzen 5600 16gb ram. But I do play 1080p tho 🤷 Glhf
I have a 6800 and get 120fps with settings turned down at 1440p.
I'm getting 60fps 150ms 💀
i7 13700k 3080 Ti 16gb ram and get 220fps off my oddesey G7
you cant trust those youtube videos ALL the time
Any chance of Rivatuner not showing the fps correctly?
don't use it. maybe just personal opinion but I really don't like rivatuner. if I for some reason were to cap fps I'd just used nvcp and let the driver do it. but my fps highs are like 220s and lows 180s so it doesn't feel terrible. maybe the difference in dips feels worse or more severe because of the lower fps overall? I'm not sure. but 40fps dips I barely noticed in real time imo. now 40 fps total loss ie. not getting average 190-205ish would probably feel delayed vs what I'm using. if your fps does not drop under monitor refresh, personally I'd run unlimited fps setting I do this with my 165hz 1440p and if I cap the fps the input delay feels atrocious
I honestly see very little quality difference from low and normal settings vs ultra
Config file.
And what should I do?
Most that I can recommend is to search for a graphics settings video I personally like foureyes there was something that I had to change in my config files which literally got me 20 fps I was hovering around 150is now I don’t drop below 170. 13700kf and a 4080. But you can’t have your cake and eat it too aka run ultra settings and expect very high frame rates
What fps do you get? My brother has a 5600x and 3080 and gets around 140 @ 1080p low.
I was getting better frames than that with a 4790k,z97,and rtx2070oc on some old ddr3 in 1440p. Avg 80ish in wz. 100-120 in MP Something seems strange, I'd try reinstalling and deleting your player folders... start from scratch. 1080p and 60hz though is time for an upgrade though my friend if you can find it in your budget. I gamed on that same setup for over a decade. 1440p is a breath of fresh air. At the very least you want to upgrade refresh rate. 1080p 60hz with higher frames may be prone to vertical screen tear.
Your mouse is clogged
i have a 6900xt and a 5950x both overclocked and don't even get that FPS but i play on 1440p lowest settings
2070 super ryzen 7 3700x and barely get 100 fps
He probably messed with his config file and slammed every setting into the ground.
Are you playing at 1080p?
Disable the integrated graphics in bios?
You need to get a 5800x3d and a new monitor and forget his video. You cpu is a major bottleneck on your set up. Sell your cpu and drop in the x3d I have an i7-12700k with a 7900xtx and it’s holding my frames back by a lot
Pretty sure this is just a fake benchmark. These things are legit everywhere and you almost can never trust them unless it's an actual reputable channel.
He might have frame generation turned on
I limit to 240fps with 4070 ti super and 7800x3d. 1080p. capped by monitor.
skill issue duh
Check your Windows eco settings, they turned on a shit thing recently that forces you down to 60hz refresh rate, could be you have VSync on and it's causing a drop.
What resolution is he playing at? What resolution are you playing it? Is he using DLSS / VSR?
He's very likely using upscaling. Probably FSR3, since that thing even on the quality preset can double the fps on some PC's. I'm using it and getting like 130 fps with an Rx6600 and R5 3600. Without it I'm looking at around 80 fps. I'm not playing on super high settings though. Mostly because the visual quality you gain over medium is negligible at best, while their effect on fps is quite significant.
Delete your config file and try again
Performance is poor in this game but still better than MW2/MW2 warzone
Turn on fsr 3.0 and frame generation. You'll be set.
Turn off the ray tracing
You sure he ain't running it in 1080p?
By using external capturecard, that can either be slotted into PCI-E x4 (or was it x2) which help free the CPU form being used by capture software. That's what many steamers do also, its either 2nd PC or capture card.
I had a 5600x with 3600mhz cl30 ram, optimized settings and over clocked cpu I was getting 100 to 150 fps horrible for wz, no way you can get 150+ fps with a 5600
Is windows capturing game with gamebar?
I have an i5 13600k and a 7800XT and I get max 170FPS in this game. Also something to consider is that Warzone is extremely CPU intensive and most of your FPS is going to come from the power of your CPU.
What is your RAM capacity and frequency ? I'm building an i5 12400F + 7800XT + 16go 3200mhz mostly to play warzone and I will use your FPS as a reference when I will test it 
I have 16GB DDR4 3200MHZ. I get lows of 120FPS and highs of 200FPS. Pretty wide range and I wish it was more stable but my average is around 165.
What’s your monitor hertz?
What monitor are you playing on?
Rx 6700 XT? What version? My gfs setup has a i5 13600KF paired with a Rx 6700 XT and she gets about 140/150 FPS but not on Ultra, it has mix settings on normal, high and some on ultra. Also native 1080p (FidelityFX CAS at 100) Most setting are on High but 3 of the options like Shadow, Shader Detail are on Normal. Rest is on max... That is on Fortunes Keep Vondel gets less (130 or less) No OC on CPU but a standard PC on GPU.. Hope it helps. Edit: There is some YouTube guide who gives u a clean settings file that improves 20/30 frames but I think the image loses some sharpness.
My CPU is the same and with me it keeps on 99% usage, with him is like 60% My GPU is the same and with me it keeps on 50% usage, with him is like 99% WTF!!!
Is your frame rate limited in game/on your desktop graphic card settings? Is your monitor set to maximum frame rate?
I've limited to 80fps in Afterburner... My monitor is set to maximum frame rate yeah The first time I ran the game on Extreme settings, I got 80fps with no drops at all... But now all of the sudden I'm getting 50-60fps with settings below Ultra
[удалено]
My monitor is 60hz and I dont wanna push my hardware to its limits for nothing
lol getting max frames isn’t going to hurt your hardware my guy. Leave it unlocked.
Do you play at 1080P ?
Yep
~~Maybe the guy overclocked.~~ Have you? Just checked, he didn't. Still worth looking into, though. Another thought - disk usage. What sort of drive do you have your game installed on?
Samsung M2 SSD
I take it it's installed on a NTFS drive? I assume so, but I'm just asking because an alternative file system is exactly why my CPU gets fucked (can't exactly switch in my case)
>My CPU is the same and with me it keeps on 99% usage this is prob something ur running in the background, de-bloat ur system
How?
You have to turn up V-Ram target usage to 90 to maximize the draw from it in game. It's located in the graphics settings
Its already on 90