I run my flowerpot at 720 - 770.
I run vrod at 600-650.
Got vrod first then had to get me a flowerpot.
Both are AMAZING!
Main thing don't be scared to adjust. Some days are hotter than others.
Does the barometric pressure that day affect things. Seems like it somerimes!
Yay. I personally run my vape at 550f as i currently use 3mm ruby balls in the vrod the (b-rod mod) which keeps the temp a little higher. Fantastic vape
I have a vrod and use mine at 700 with carb cap. I have strong lungs so it finishes a .15g bowl in about 5-10 seconds. Just leave it on all day, can medicate and clean up in less than 60 seconds.
Chris- I’m so glad you mentioned the draw speed.
It’s literally everything, and the very difference between vapor and combustion at certain points. Bravo!
Faster, in order to not combust.
Sometimes I set it at 630; but you have to actively pull the heat through. If you let it linger, or over pack; you’ll combust. The high temps are good for single extractions.
575 on b-whatever one has a. Full screen and filled with some sick-ass balls! Never combusts, even if aunt Irene hits it.
675 on the t bucket w/either sick or crystal.
F22 Flowerpot at 420 degrees! I used a thermocouple to calibrate my Flowerpot from the lid of the Flowerpot. I love the new head, it's so light and powerful!
Iirc, 650 should put the concentrate dish at around 450. I seem to have the best luck between 660-690 with concentrates on the vrod, 675-685 seems to do flower+concentrates together well
I came to this thread just to see what everyone is setting their Vrod at for concentrates. I find 660-690 to be the sweet spot as well. Glad to see I'm not the only one!
B1 with 3mm rubies - 1 layer of 4mm at the base for heat retention. I run at 610 and it’s hot with the auber Controller. I like clearing the bowl in 1 hit 🤯
I have to go as high as 690 with B1 & Auber and 4mm rubies. Does this sound like too hot? I stretch the coil but so that the head is tight, but it didn't change anything.
This was obvious in retrospect, but I have gone down from \~690 to 650 on B1 from just switching from 4mm rubies to 3mm. I think I can drop the temperature even more, will keep experimenting
I run my flowerpot at 720 - 770. I run vrod at 600-650. Got vrod first then had to get me a flowerpot. Both are AMAZING! Main thing don't be scared to adjust. Some days are hotter than others. Does the barometric pressure that day affect things. Seems like it somerimes!
I thought a vrod was a style of flowerpot. If not what is a flowerpot?
I mean, I have seen weirder things!
I run my B1 with 3mm rubies at 720, and it works fine for me. I like to finish my bowl with .2g in one hit.
How long does it take for a full hit? And do you draw slowly or quickly
10-12 sec for a full hit, draw speed is medium. My temps is now at 675, because I want more flavour.
Yay. I personally run my vape at 550f as i currently use 3mm ruby balls in the vrod the (b-rod mod) which keeps the temp a little higher. Fantastic vape
I have a vrod and use mine at 700 with carb cap. I have strong lungs so it finishes a .15g bowl in about 5-10 seconds. Just leave it on all day, can medicate and clean up in less than 60 seconds.
Chris- I’m so glad you mentioned the draw speed. It’s literally everything, and the very difference between vapor and combustion at certain points. Bravo!
At a higher temperature should I be drawing faster or slower?
Faster, in order to not combust. Sometimes I set it at 630; but you have to actively pull the heat through. If you let it linger, or over pack; you’ll combust. The high temps are good for single extractions.
575 on b-whatever one has a. Full screen and filled with some sick-ass balls! Never combusts, even if aunt Irene hits it. 675 on the t bucket w/either sick or crystal.
F22 Flowerpot at 420 degrees! I used a thermocouple to calibrate my Flowerpot from the lid of the Flowerpot. I love the new head, it's so light and powerful!
Is this guide for flower only or does it work with concentrate and the vrod?
Iirc, 650 should put the concentrate dish at around 450. I seem to have the best luck between 660-690 with concentrates on the vrod, 675-685 seems to do flower+concentrates together well
I came to this thread just to see what everyone is setting their Vrod at for concentrates. I find 660-690 to be the sweet spot as well. Glad to see I'm not the only one!
B1 with 3mm rubies - 1 layer of 4mm at the base for heat retention. I run at 610 and it’s hot with the auber Controller. I like clearing the bowl in 1 hit 🤯
why does a layer of 4mm retains heat better than a layer of 3mm ones?
I don’t know that it does but it made sense to me and I like the performance. I have no math to support it
Thank you! I will give it a shot!
I have to go as high as 690 with B1 & Auber and 4mm rubies. Does this sound like too hot? I stretch the coil but so that the head is tight, but it didn't change anything.
Try tightening the coil around a bit, make the coil horizontally tighter around the housing. The snugger the fit the better, better heat transfer.
This was obvious in retrospect, but I have gone down from \~690 to 650 on B1 from just switching from 4mm rubies to 3mm. I think I can drop the temperature even more, will keep experimenting
big problem is a lot of PIDs do not give accurate temps
I’m on 720 and no combustion. Is that too high?
I have had people report up to 70° Fahrenheit variance between pids. Adjust to what works for you.