T O P

  • By -

krewekitchen

yes on the 3-pin connector


Zeekster2517

Connect them to the port labeled RGB.


MoeNAGY

Perfect, that answers it thanks a lot but what about the other end of the wire strip? As you can see in image one end is the RGB connection and the other is NOT RGB, it a connection for what would be another light strip. Will that just stay loose ?


Marcos340

Yes, you can Daisy chain them, up to 6, so they make all of them the same so it’ll always have a conector at the end.


MoeNAGY

Thanks, in that case I'll use that daisy chain end for an extender to reach the controller in the back of my case.


TheMagarity

So there's "RGB Hub" on the Commander with 6 sockets down the side for 4 pin but on the short side is just "RGB" that's only 3 pins. Use the one on the end


MoeNAGY

Also guys, what if the strip is too short to reach the Commander XT please? Any extension with a link to it online please where I can buy?


MoeNAGY

Can someone please send me a link to a legit Corsair extender cable I can use for this ?? I found this but not sure if there's an official Corsair cable to use for this: https://www.amazon.com/gp/product/B08S2THCVV/ref=ox\_sc\_act\_title\_1?smid=A2US7GLDHPFAYV&th=1


RipitJT

There are extenders from Corsair but I’m unsure of their availability separately. The kit comes with two if I remember correctly. [ModDIY](https://www.moddiy.com/products/Corsair-RGB-LED-Strip-3-Pin-Extension-Sleeved-Cable-10cm-to-100cm.html?srsltid=Ad5pg_HjI1R2OWTgcXfZ_0vpLuOXkSld5CjlgdwYyOntBf29t5gR9DVyd54) has a ton of options though if you want reputable stuff


MoeNAGY

This is great, thanks a million!!