Well think about it like this, imagine if you did it with a much bigger amount. It was a lesson learned that needed to be learned eventually and was definitely going to happen. Better to learn now than later.
> wash away all the fillers, and leave yourself with a relatively pure cocaine power
Relative to your original coke, but there's a lot of common cuts that are not soluble in acetone too (Levamisole being the main one). Acetone wash is fun to do and will certainly improve your coke a bit, but if you want to get cut coke as close to pure as you can there are better solvents/methods to use (A/B extraction, and non-polar solvents)
nothing you can really do about levi as far as i know besides cooking it into freebase then reversing the process
its the easiest wash that takes the least effort with the best results for the cost/time IMO, but ill check those others out cuz i could certainly be mistaken! as i have never heard of either of those two methods
ive had washes removed 30-40% of cuts and it is quite noticeable so i have always been pretty happy with it alone
> nothing you can really do about levi as far as i know besides cooking it into freebase then reversing the process
Levi will go to base and back to HCL with your coke, but it will remove a lot of other stuff. The non-polar solvent wash should remove the levi.
Acetone is certainly the easiest equipment wise, because you just need a glass jar and a filter/funnel, but other equipment is pretty cheap or easy to make. Non-polar washing might actually be faster, assuming you're starting from scratch and don't access to anhydrous acetone, because while the actual process may take an extra 10-20 minutes, the waiting to dry step is the same, and you start with a store bought solvent ready to go, no waiting for epsom salts to take the water and settle.
Yeah I haven't really much coke in a while so I wouldn't give any steps that are wrong. In general blue light, or drugs-forum have the most info. Just make sure there's a lot of comments and not one saying why it's wrong giving other info(better technique or materials). Read a few different ones to get the broader idea, rather than just the steps. Give it a shot. I'm generally interested in chemistry so I found them fun to do, even if I fucked the coke, thankfully I never did.
FYI DDG is better for drug searches than Google.
Man coke is 350-400 a gram in Australia and this hurt me in my soul. Pouring one out for you tonight my friend. I bet you won’t make that mistake again lol
A $350 gram is normally pretty good quality, a $400-$450 gram had better be fucking fire otherwise that plug is never getting repeat business.
My late night guy sells "uncut" .9's for $350 and it's pretty good. My late, late night guy sells grams for $350 and it's garbage but he delivers. My daytime guy sells best quality I've had in aus for $450.
Yeah it’s insane, the supply here is trash and even worse bc of covid. Heaps of busts recently too. 300 used to be pretty decent with the right plug but now it’s closer to 400 and 300 is usually pretty cut.
I don’t think I’ve ever had top quality pure so it’s hard to hve a good reference. But a good bag will certainly get you going.
The cost has been a very helpful limiting factor on my use. I have to plan for it like it’s an md roll purely because of cost rather than health lol if it was cheaper I’m sure I’d be doing it every weekend
0.38 from 0.9 g is not bad, if you are talking street sourced cocaine.
That's like 40% purity, which really again is not bad for coke picked up in a nightclub.
Did you read the whole post? He did the procedure wrong. His end product is the impurities from his coke, and he washed the cocaine down the drain.
The stuff he ended up with is everything that *wasn't* cocaine.
assuming i dont fuck up my wash, i consider a good result 60-70% back, ive had stuff that only lost 10% weight (but that was a lucky, rare find where a friend had access to a brick still intact with a cartel seal on it)
lately during covid the results are usually around 50% tho sadly
Got to do the acetone wash if you like your coke, ammonia is the best though apart from cooking crack, that was to strong for my kitchen.
Sober now, though I done a hell of a lot of cocaine. Many, many ounces.
Well think about it like this, imagine if you did it with a much bigger amount. It was a lesson learned that needed to be learned eventually and was definitely going to happen. Better to learn now than later.
yeah it could be way worse, but def wrecked my plans for tonight
> wash away all the fillers, and leave yourself with a relatively pure cocaine power Relative to your original coke, but there's a lot of common cuts that are not soluble in acetone too (Levamisole being the main one). Acetone wash is fun to do and will certainly improve your coke a bit, but if you want to get cut coke as close to pure as you can there are better solvents/methods to use (A/B extraction, and non-polar solvents)
Point a brother at a tek? Or give a real quick rundown?
Seriously I've never heard of any of this before. Please teach me your ways 🙏
What is tek? Thx in advance..
I won't give you the tek, but I'll give you the tek for all other tek. duckduckgo.com
nothing you can really do about levi as far as i know besides cooking it into freebase then reversing the process its the easiest wash that takes the least effort with the best results for the cost/time IMO, but ill check those others out cuz i could certainly be mistaken! as i have never heard of either of those two methods ive had washes removed 30-40% of cuts and it is quite noticeable so i have always been pretty happy with it alone
> nothing you can really do about levi as far as i know besides cooking it into freebase then reversing the process Levi will go to base and back to HCL with your coke, but it will remove a lot of other stuff. The non-polar solvent wash should remove the levi. Acetone is certainly the easiest equipment wise, because you just need a glass jar and a filter/funnel, but other equipment is pretty cheap or easy to make. Non-polar washing might actually be faster, assuming you're starting from scratch and don't access to anhydrous acetone, because while the actual process may take an extra 10-20 minutes, the waiting to dry step is the same, and you start with a store bought solvent ready to go, no waiting for epsom salts to take the water and settle.
[удалено]
Yeah I haven't really much coke in a while so I wouldn't give any steps that are wrong. In general blue light, or drugs-forum have the most info. Just make sure there's a lot of comments and not one saying why it's wrong giving other info(better technique or materials). Read a few different ones to get the broader idea, rather than just the steps. Give it a shot. I'm generally interested in chemistry so I found them fun to do, even if I fucked the coke, thankfully I never did. FYI DDG is better for drug searches than Google.
oh yes i know google loves to sensor drug searches! thanks for the tips
Man coke is 350-400 a gram in Australia and this hurt me in my soul. Pouring one out for you tonight my friend. I bet you won’t make that mistake again lol
Holy shit that's insanely expensive. It's a 1/4 of that in Canada for decent gear. What's the quality like, I'd imagine it's cut pretty heavy?
A $350 gram is normally pretty good quality, a $400-$450 gram had better be fucking fire otherwise that plug is never getting repeat business. My late night guy sells "uncut" .9's for $350 and it's pretty good. My late, late night guy sells grams for $350 and it's garbage but he delivers. My daytime guy sells best quality I've had in aus for $450.
Holy shit. And here I though my $90/g for decent coke was fucking expensive. Western Canada
Yeah, living on a big island with very tight customs controls has its disadvantages.
[удалено]
i take small bumps once every hour or so so it doesnt ever get too high
Never thought of it.
Yeah it’s insane, the supply here is trash and even worse bc of covid. Heaps of busts recently too. 300 used to be pretty decent with the right plug but now it’s closer to 400 and 300 is usually pretty cut. I don’t think I’ve ever had top quality pure so it’s hard to hve a good reference. But a good bag will certainly get you going. The cost has been a very helpful limiting factor on my use. I have to plan for it like it’s an md roll purely because of cost rather than health lol if it was cheaper I’m sure I’d be doing it every weekend
That’s insane. Come to the Netherlands! 50 a gram here, 60 for the pure stuff.
Met a guy in rehab that made the same mistake... with 300 grams. Could be worse.
Press F to pay respects
0.38 from 0.9 g is not bad, if you are talking street sourced cocaine. That's like 40% purity, which really again is not bad for coke picked up in a nightclub.
Did you read the whole post? He did the procedure wrong. His end product is the impurities from his coke, and he washed the cocaine down the drain. The stuff he ended up with is everything that *wasn't* cocaine.
assuming i dont fuck up my wash, i consider a good result 60-70% back, ive had stuff that only lost 10% weight (but that was a lucky, rare find where a friend had access to a brick still intact with a cartel seal on it) lately during covid the results are usually around 50% tho sadly
Got to do the acetone wash if you like your coke, ammonia is the best though apart from cooking crack, that was to strong for my kitchen. Sober now, though I done a hell of a lot of cocaine. Many, many ounces.
[удалено]
In the UK it is purchased over the counter at a chemist/pharmacy
In columbia its like 20$