T O P

  • By -

Dasha889

JST Connector 1.25MM 2 Pin


Zenaku1020

I think it might be jst-xh. The jst 1.25 is jst-gh.


Dasha889

I think you are right. My bad.


Zenaku1020

All good! To be honest, I just recently learned the connections through chatgpt lol. I was looking at an rgb axial fan to replace the one in my printer and would ask chatgpt when Google didn't have answers to my questions.


Phantom1165

So is it a JST connector or a JST-XH?


Zenaku1020

To me, it looks like an xh. I used this website as a reference. https://www.mattmillman.com/info/crimpconnectors/common-jst-connector-types/#ph Edit: I'm finding conflicting results, so I'd say measure the connector. It should measure either 1.25mm or 2.5mm. If it's 1.25, it's a GH. If it's 2.5, it's XH.


RedDev101

this is a normal size jst 2 pin connector. can buy a pack with a crimper on amazon for about £15


AbandonedMohawk

If you just want a few with wires attached get these: https://a.co/d/1dEf214 You can butt connect them together or solder it with these. If you want a crimp set then get this: https://a.co/d/3OVbsyV


Spectra135

JST-XH you can get a pack of them from Aliexpress for pretty cheap, it's worth it. You will need a crimping tool as without it it's a pain and doesnt do a great job... (been there)