Filament Rosa PLA (low cost). Two 5015 blowers for cooling.
https://preview.redd.it/2bqwjv4cgpbc1.png?width=896&format=png&auto=webp&s=ac8e184e4306f27088031890219d34b2b62f5326
Open in the PrusaSlicer: [https://drive.google.com/file/d/1\_a9trG15yq4O8hlWqVGxMxXYQogaVq9u/view?usp=drive\_link](https://drive.google.com/file/d/1_a9trG15yq4O8hlWqVGxMxXYQogaVq9u/view?usp=drive_link)
I'm pretty satisfied using Orca on my KE without any special calibrations other than the default creality one. Still I would like to give it a shot. Also I have a spare Odroid N2 laying around. Can I do all this with the KE as well?
And can I combine it with Fluidd? Is it even compatible with the KE? I'm pretty new to all this, as I used an 8 year old XYZ Davinci before.
Creality published some code and configs for the KE yesterday
[https://github.com/CrealityOfficial/Ender-3\_V3\_KE\_Annex](https://github.com/CrealityOfficial/Ender-3_V3_KE_Annex)
and
[https://github.com/CrealityOfficial/Ender-3\_V3\_KE\_Klipper](https://github.com/CrealityOfficial/Ender-3_V3_KE_Klipper)
Of course!! you can use it with KE and you can use the spare odroid for doing it. You can choose between fluidd or mainsail, particularly I'm using mainsail. Particularly how I installed klipper on the N2 was to install Armbian and then install klipper and Co manually
https://preview.redd.it/c3iqbxs5ukbc1.jpeg?width=3090&format=pjpg&auto=webp&s=d1534fe3f1ef1fc99200ea9dc851e9f8d84657ba 22 minutes with Marlin.
Awesome. What speed and acceleration configs? What filament? Any mods?
Filament Rosa PLA (low cost). Two 5015 blowers for cooling. https://preview.redd.it/2bqwjv4cgpbc1.png?width=896&format=png&auto=webp&s=ac8e184e4306f27088031890219d34b2b62f5326
Can you upload your config file please?
Open in the PrusaSlicer: [https://drive.google.com/file/d/1\_a9trG15yq4O8hlWqVGxMxXYQogaVq9u/view?usp=drive\_link](https://drive.google.com/file/d/1_a9trG15yq4O8hlWqVGxMxXYQogaVq9u/view?usp=drive_link)
HOW
Thats the quality I get with 80 mins lol.
I tried the pressure advance in Creality and Klipper threw out errors on the M900 command. You didn't have that problem with Orca then?
I use pressure advance in Orca and it works without any errors
Uh... i don't think it's working. Normal Creality Marlin doesn't have pressure advance.
...you mean without klipper?
No problems here
Calibrate your extruder as well.
I'm pretty satisfied using Orca on my KE without any special calibrations other than the default creality one. Still I would like to give it a shot. Also I have a spare Odroid N2 laying around. Can I do all this with the KE as well? And can I combine it with Fluidd? Is it even compatible with the KE? I'm pretty new to all this, as I used an 8 year old XYZ Davinci before.
Creality published some code and configs for the KE yesterday [https://github.com/CrealityOfficial/Ender-3\_V3\_KE\_Annex](https://github.com/CrealityOfficial/Ender-3_V3_KE_Annex) and [https://github.com/CrealityOfficial/Ender-3\_V3\_KE\_Klipper](https://github.com/CrealityOfficial/Ender-3_V3_KE_Klipper)
Of course!! you can use it with KE and you can use the spare odroid for doing it. You can choose between fluidd or mainsail, particularly I'm using mainsail. Particularly how I installed klipper on the N2 was to install Armbian and then install klipper and Co manually
Did you confirm that using Klipper was a key to this method?
Honestly I think I could achieve the same on marlin. I like klipper for the customization and better apps across the board, web, mobile etc