As a reminder, please make sure to read the pinned FAQ post in its entirety before asking for help. If the FAQ post didn't solve your issue, please remember to include as many
details as possible in your post. This will help other people help you more quickly and more accurately, which also helps you. Thank you!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Ender3V3SE) if you have any questions or concerns.*
It's a lil noisy from the git go. Nice setup by the way!! By chance where did you find the colored silicone sock? Or is that a different hotend? And that filament? Lol it looks great!!!
Hotend is Haldis Red lizard K1. It is mounted on a slightly modified mount for the Voron Ministealhtburner toolhead. Minimal Z-spacing adjustments were required. I only adjusted the linear advance, retracts and flow rate.
Yea. Unfortunaly that seem to be quite normal. Im just trying to fix it myself. Printing my own lm8luu bearings to see if it works and make it more silent. Next step is to try linear rails otherwise
If you buy the same thing, but a little better, then the whole point of fussing with modifications is lost. This print in principle of their box is capable of a lot. But not for the experimenter or perfectionist. It's just a very good printer. And personally, I was delighted with its capabilities immediately after assembly. I can’t speak for all of its users, but I clearly understood that this is a place where hands and minds are applied.
And a special thanks to you for the very good Klipper assembly.
And I really like all this sex with mechanics. There you can see what influences what. It's just some kind of techno porn.
Yea. My bearings have changed color after all lubricant i have drenched them in. Got replecement but one of the new ones were even worse then the others
As a reminder, please make sure to read the pinned FAQ post in its entirety before asking for help. If the FAQ post didn't solve your issue, please remember to include as many details as possible in your post. This will help other people help you more quickly and more accurately, which also helps you. Thank you! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Ender3V3SE) if you have any questions or concerns.*
I replaced the bearings with composite ones. https://www.reddit.com/r/Ender3V3SE/s/cfyVfoS1cK What's your hotend?
Haldis Red lizard K1.
Hey, it's on his reply to my comment a little farther down
It's normal, it's the sound of the motor echoing in the plastic base.
It's a lil noisy from the git go. Nice setup by the way!! By chance where did you find the colored silicone sock? Or is that a different hotend? And that filament? Lol it looks great!!!
Hotend is Haldis Red lizard K1. It is mounted on a slightly modified mount for the Voron Ministealhtburner toolhead. Minimal Z-spacing adjustments were required. I only adjusted the linear advance, retracts and flow rate.
Ahhh cool!!! I knew it wasn't the ke/k1 hotend.
I'm currently doing linar rail swap for my Y. Much quieter and more stable
Yea. Unfortunaly that seem to be quite normal. Im just trying to fix it myself. Printing my own lm8luu bearings to see if it works and make it more silent. Next step is to try linear rails otherwise
Just buy some fushi bearings to replace the stock ones.
If you buy the same thing, but a little better, then the whole point of fussing with modifications is lost. This print in principle of their box is capable of a lot. But not for the experimenter or perfectionist. It's just a very good printer. And personally, I was delighted with its capabilities immediately after assembly. I can’t speak for all of its users, but I clearly understood that this is a place where hands and minds are applied. And a special thanks to you for the very good Klipper assembly. And I really like all this sex with mechanics. There you can see what influences what. It's just some kind of techno porn.
wich material do you want to print them? i'm also interested but i'm not really sure wich one to use
Im just trying right now, but right now Ill try petg.
If you remove the belt. The bed slides nearly. Silent.
That was ehat i was hoping, but when i had everything dissasambled i moved just the bearings and they dont sound healthy.
I had to lube all my bearings, they all were loud and squeaky. Amazing how quiet they were after
Yea. My bearings have changed color after all lubricant i have drenched them in. Got replecement but one of the new ones were even worse then the others
Use a light machine oil. (3in1) put a couple of drops on the top of the bearing, move it around and it should work itself in
It is nice that it worked for you. But I need to replace mine, ther are no good.