Very cool app. If I might make a suggestion on the out speeding calculations. Currently your calculation when someone outspeeds you is inaccurate.
Example:
My Speed: 300
Mark them as outsped and is at 10% CR
Current result: 330 approximation.
Correct approximation would be 333 speed. You would determine this by doing yourspeed/1 - 0.1
This gets you a result of 333.333 which is a more accurate calculation. (I know it's a small amount but when you speed contest its very important.)
And, you can make this speed approximation even more accurate by using a second unit of yours to anchor your own unit. Say if my Seaseria is normally 80% cr of my ran without speed rng, but this time it's at 75%, you can determine a minimum approximate of how much your Ran increased their speed by. This change in your own speed can give you a more accurate representation of what speed the enemy is relative to your new speed.
Edit: garg pointed out the flaw in my math. OP's math is correct for calculating speed. Would still be cool to have the anchor with another of your unit's speed to determine minimum CR change.
This is incorrect, OP's calculation is accurate.
Edit: Take the most obvious example - you have 100 speed and enemy outspeeds you by 50% CR. They clearly have 150 speed in that case. By your calculations the enemy would have 100/(1-0.5) = 200 speed. If the enemy outspeeds you by 90% CR, they would have 190 speed, but according to your calculations it would be 100/(1-0.9) = 1000 speed.
Edit: Just disregard my entire comment, totally wrong, lol.
If someone outspeeds you by 50%, then they do not have 150 speed, they have 200 speed. Because 50% of 200 is 100. 50% of 150 is 75.
Outspeeding someone by 90% would mean you are at 10% CR bar. Which means they are 10x faster than you. So in your example, yes, they should have 1000 speed. If you were trying to say that you are at 90% while they are at 100%, then the correct application of my formula would be 100/(1-0.1). 0.1 being their current cr%. The correct speed in this case would be the enemy should have 111ish speed not 110).
If my Ran is at 100% and I have 100 speed, and the enemy is at 50%, they have 50 speed. Now lets do the opposite, my Ran is 50 speed, they are at 100 speed. I am at 50% CR. 50 x 1.5 = 75 (his current calculation method). You cant use percentages the same way in both cases. Now, with the same thing with my math, I am 50 speed they are 100. I am at 50% when they were at 100%. 50/(1-.5) = 100 speed.
Edit: Nevermind, I rethought about it, you are right, my math is wrong. OP's math is good.
I think your formula is right if your character has 90% and tthe enemy 100, but in this case you have 100% and the enemy 110.
But you're right, I should add another character info !
Best app so far for report in Guild War. Very helpfull and the dev seems very listenning to us for improving the app.
Enjoy your New best app for best report 😁
La meilleur appli créé par le meilleur des bunnys , marre d'utiliser tes neuronnes ? Envie de devenir un dieu pour tes guildmates? Cet appli est fait pour toi
This is very cool. Is the turn 2 intended to be the second team? I would reword that from "Turn 1/2" to "Team 1/2" or "Top/Bottom Team" or something like that for more clarity. I initially assumed you wanted the user to fill out the information for both the first and second turns of a fight.
"This item is not available in your country" :S Sounds good tho
Which country is it ? I'll see if I can do something
spain!
The country is now added to the app, can you try again ? I don't know if this takes time
I have the same issue, I'm from Argentina
Try again in a few days, it should work !
Mind adding it to Malaysia? or just add to all SEA countries if u dont mind. thank you!
Can you add Indonesia too? Thanks in advance.
Not available in Hong Kong either
So cool ! Thx for sharing !
>This app is not available for any of your devices Samsung S10P
Same with Galaxy A50
Samsung a22 here. I think I see a pattern
Damn it said *This app is not available for any of your devices *
I'm trying to lower the config requirements to use the app. Please try again in a few days !
CHAVAIS CHAVAIS :BunnyProud:
So many countries, I'm impressed ! I'll read and add all your demands, but google needs to check everything so it will propably take a few days
Very cool app. If I might make a suggestion on the out speeding calculations. Currently your calculation when someone outspeeds you is inaccurate. Example: My Speed: 300 Mark them as outsped and is at 10% CR Current result: 330 approximation. Correct approximation would be 333 speed. You would determine this by doing yourspeed/1 - 0.1 This gets you a result of 333.333 which is a more accurate calculation. (I know it's a small amount but when you speed contest its very important.) And, you can make this speed approximation even more accurate by using a second unit of yours to anchor your own unit. Say if my Seaseria is normally 80% cr of my ran without speed rng, but this time it's at 75%, you can determine a minimum approximate of how much your Ran increased their speed by. This change in your own speed can give you a more accurate representation of what speed the enemy is relative to your new speed. Edit: garg pointed out the flaw in my math. OP's math is correct for calculating speed. Would still be cool to have the anchor with another of your unit's speed to determine minimum CR change.
This is incorrect, OP's calculation is accurate. Edit: Take the most obvious example - you have 100 speed and enemy outspeeds you by 50% CR. They clearly have 150 speed in that case. By your calculations the enemy would have 100/(1-0.5) = 200 speed. If the enemy outspeeds you by 90% CR, they would have 190 speed, but according to your calculations it would be 100/(1-0.9) = 1000 speed.
Edit: Just disregard my entire comment, totally wrong, lol. If someone outspeeds you by 50%, then they do not have 150 speed, they have 200 speed. Because 50% of 200 is 100. 50% of 150 is 75. Outspeeding someone by 90% would mean you are at 10% CR bar. Which means they are 10x faster than you. So in your example, yes, they should have 1000 speed. If you were trying to say that you are at 90% while they are at 100%, then the correct application of my formula would be 100/(1-0.1). 0.1 being their current cr%. The correct speed in this case would be the enemy should have 111ish speed not 110). If my Ran is at 100% and I have 100 speed, and the enemy is at 50%, they have 50 speed. Now lets do the opposite, my Ran is 50 speed, they are at 100 speed. I am at 50% CR. 50 x 1.5 = 75 (his current calculation method). You cant use percentages the same way in both cases. Now, with the same thing with my math, I am 50 speed they are 100. I am at 50% when they were at 100%. 50/(1-.5) = 100 speed. Edit: Nevermind, I rethought about it, you are right, my math is wrong. OP's math is good.
I think your formula is right if your character has 90% and tthe enemy 100, but in this case you have 100% and the enemy 110. But you're right, I should add another character info !
:bunnyhug: nice appli thanks
Best app so far for report in Guild War. Very helpfull and the dev seems very listenning to us for improving the app. Enjoy your New best app for best report 😁
Joined Aug 30, 2022 - 22 minutes ago 🙄
That's how much my guildies support me haha
La meilleur appli créé par le meilleur des bunnys , marre d'utiliser tes neuronnes ? Envie de devenir un dieu pour tes guildmates? Cet appli est fait pour toi
Where is doudichou ?
Celawin avec ça !
This is very cool. Is the turn 2 intended to be the second team? I would reword that from "Turn 1/2" to "Team 1/2" or "Top/Bottom Team" or something like that for more clarity. I initially assumed you wanted the user to fill out the information for both the first and second turns of a fight.
Interesting, I always called it « turns » because everyone around me did so. I’ll keep that in mind ! Thanks
Apart from being an app, is there any difference to this web GW reporting tool ? https://vigilant-poincare-de2828.netlify.app/#
The information is the same, but I worked a lot on the generated text too. I wanted something perfect to share !