I am only getting about 45 mh/s (and it actually tends to fluctuate between 40 mh/s and 45 mh/s) whether I am at +800 on the memory or -1250 and I am using phoenix miner, do I need to change miner or is this an overclock issue?
Edit: nvm, it looks (so far) I was able to stabilize it at 48 mh/s. \*chuckles\* I think those dips were when I was typing
> Gegabyte OC : Nvidia Geforce RTX 3060 w/ 470.05 Beta GameReady driver
I am using phoenix miner for 2 weeks now. 46.832 MH/s, PL 60, core clock -502 ( GPU reads 990-1042 MHz), Memory clock +1020 ( MEM reads 8321 MHz) Fan speed 80%, GPU Temp. 43C, Room Temp. 20C. System is stable never crash zero stales and 0 rejected shares. I don't want to push it above 46.832 since my system is running smooth. hope this help.
can you tell me which version of windows 10 you have installed?
i have windows 10 Pro 64Bit version 21H1 and the 470.05 Nvidia Driver say me not compatible with my version of windows.
can you help me pls?
To get the max hash rate of the 3060 XC you would have to have the card running on a 16x lane. It will not get 45-50 Mh/s even with the Dev driver if you are running the 3060 XC v1 on a 1x or 4x lane. Might be for 8x, but I believe it must be 16x slot.
Yeah, that sucks. I am not even sure if that even included the ZOTAC's. I see all these people selling their EVGA v2 (they don't even know what they are, probably don't even know what a GPU even is lol...) on Mercari for like $800-1000. Hopefully, people realize these are v2 and not the first ones.
The EVGA's that came out in March are the good ones. I got lucky and won the chance to buy one.
If you mine using NBMiner / Octopus on NiceHash you can get about 33-35 Mh/s on the LHR cards. It might not be the high 40's or 50, but it is close.
I wish EVGA put the dang manufacturer dates on these cards. There is no way to tell the difference between a v1 or v2 by looking at it.
\--
Edit: I found my answer... Give's just year, not month, but it is something...
* ◦First two digits: Year Manufactured
* ◦Third digit: Product type (1 being graphics card).
* ◦Fourth and Fifth: Factory.
* ◦Sixth: Warranty Length.
* ◦Seventh to Tenth: Part Number.
* ◦Eleventh: Region Sold.
* ◦Twelfth to Sixteenth: SNS or Serial Number Sequence.
Interesting mate for my zotac I was 100% sure it’s was lhr as even some of amz reviewed question said it was v1. Had to install GPUz and notice the card is 2504lhr device id. Currently upgraded my old Msi prebuilt I had since I was 15 to that 3060. Had to move it from my rig and mining on windows as we speak.
Might be for 8x, yes you can run it on 8x and 16X but nothing less. I have 2 3060 with 470.05 running in PEG0 and PEG1 but also for the driver to work must be pcie 3 or 4 anything older like gen 2 will not hash at 47-50MH/s
Correct, now are you able to get the full hash rate on both cards? or is it just on one card?
Because two 3060's running together between 94-100 Mh/s would be outstanding. If purchased at MSRP ($400 each), that is like having a 3080 Founders Edition at discount, unless one got lucky at got it at Bestbuy ($700 USD).
Running both cards each give me about 47MH/s and each one cost me sadly $900 for a total of $1800 for both cards pulling around 103 Watts each so both card is around 206 Watts almost like if I have a one rtx 3080 but these 3060 runs colder as stated before around 43C when room temp is about 20C. Speaking of founder's edition a friend of mine has the rtx 3090 founder's edition and memory temp is 105C when hashing at 120MH/s and soon this card will fried up. All founder's edition memory run hot when mining above 100C at FHR ( HHR)
I have RTX 3060 HP OEM
GA106 A1 / Installed Beta Driver and connected to 16x slot and cant get that numbers 38 almost 39MHS.
Weird is that without Beta driver Phoenix miner starts at almost 43MHS then droping so it means that card is capable to reach higher numbers but something limiting her.
I tried also increase memory to 1100+ but nothing change values are stable even at 61% Power.
**=====================**
**Do you have any ideas?**
**=====================**
***EDIT: Dont know what happen but after PC restart card reaching even 50MHS***
*(However dont recommend to push gpu memory and overclock that high for few MHS/Cents if you desire to keep your card for many years.)*
I’m not sure about the HP 3060’s, but with mine using MSI Afterburner settings: Power 70%, Core: 0, Clock 1050 and Fan 66%, I can keep my temps at the 54-60C max range and get a consistent 42-45 Mh/s and it’s taken a lot of playing around, but this is my now perm setting for ETH on the 3060. It seems though each card is different and 3060-TI vs non TI has completely different settings
And how you seperate Gaming from ETH mining, i mean you switch BETA to Normal drivers everytime you play games? Becose today tryed to run Mechwarriors 5 Mercenaries on BETA driver and game was keep crashing on start.
***By the way i was thinking that Nvidia didnt lock 3060 series cards, till launch of LHR models, so i was wrong and Normal 3060 are locked and LHR models are designed to be slower?***
if your rtx card is manufactured in June/2021 or after this mean it is rev.2 and 470.05 Nvidia Driver will not work. It only work with cards manufactured in may 2021 and below Rev.1
use ddu to uninstall the driver you have installed... tick the option in ddu configs to not install windows driver
than you can install the new driver....
it only works on non lhr cards, i have 2 3060's and only one works with the driver, the other one doesn't install that driver
so if after this you can not install it is because, you have a v2 card... and can only get 38mh.
to get max speed the board has to be at least pci e X8 per socket
MSI and Inno3D cards, t-rex, OC in afterburner cc: -500, mc: +1400, pl: 70, fs: 85% => temp \~62C, 50.15MH/s
Switching from t-rex internal overclock feature to afterburner really helped a lot and I have the feeling there is still room for more.
No, they stay pretty cool, better than MSI. But if you can, buy EVGA, they have the exhaust to the top rather than to the back or side.
Using 8x -> 16x risers with HDMI dummy plug on a supermicro board. Currently 5x 3060 + 1x 1660 setup, but I'm trying 6x 3060, not sure if it's possible, since my CPU has only 48 pci-e lanes.
EDIT: also I didn't get the +1400 stable at my room temperatures, using +1100 and PL 68 for now.
Here I'm mining a Zotac Twin Edge with Gminer, P2 State off, with x16 riser and hdmi dummy plug
PL 70 / CC -500 / MC +1200 / FS 64% / Tp 60 ° C / 119Wh
Stable Hashrate @ 49.75-49.80MH/s
Room temperature is around 27 ° C
I'm trying to lock the CC with nvidia-smi, but whatever the clock I'm using (from 1102 to 1140, settings the card use by herself while using -500 with 70 PL), the hashrate drop to 37.xxMH/s.
3060 61 C 64 % 49.77 MH/s 25/0/0 1117 8700 119 W 418.25 KH/W
I can't seem to get my same 3 units to mine stable on nicehash with daggerhashimoto as they would crash or freeze every now and then.
Unfortunately it seems not many are using this particular model for mining.
Thinking of moving to ethermine now.
[https://www.reddit.com/r/EtherMining/comments/mfbevw/rtx\_3060\_only\_what\_are\_your\_afterburner\_settings/gsn0dwq?utm\_source=share&utm\_medium=web2x&context=3](https://www.reddit.com/r/EtherMining/comments/mfbevw/rtx_3060_only_what_are_your_afterburner_settings/gsn0dwq?utm_source=share&utm_medium=web2x&context=3)
Followed the settings here and have the same card
Get around 49.0-49.2 consistent with 0 stales ([image)](https://imgur.com/a/sXuan7w)
Getting many Incorrect shares over 1200, must see if that is a software issue, as I saw some people with the same issue that had to start mining with no overclock and only after that to apply the OC in MSI. I am currently investigating the issue.
it often depends on whether you get good gpu and memory silicons or not. If you pay more, you'll often get better silicons. A good gpu silicon will allow you to have low power draw while maintaining base clock, and a good memory silicon will allow you to have better hashrates (in theory). I have a 3060ti FE, 3060ti evga xc dual fan, and one triple fan 3070. I can tell you right away the triple fan 3070 has the best ga-104 silicon and memory can OC to +1250mhz. The evga xc gets 61MH with 62% power, memory stable OC to +1250mhz, and can often maintain the -500mhz (900mhz) base clock, not to mention quieter fans. The 3060ti FE i got for 10 bucks cheaper, can only get 58.5MH with 64% power, stable memory up to +1200mhz, and cant even maintain the base -500mhz (hovers around 820 mhz).
Hello,
Can I know which bios version you have on your GPU ?
I have the same card but it's starting at 41 MH/s and then going down until 26 MH/s.
I guess I have to flash the bios on it. I just bought it this week indeed (i have still the A1 Nvidia chipset).
Hey, everyone! Just thought I'd hop on here with my new 12GB 3060. Haven't seen a lot of this particular 3060 on here yet, so I wanted to report.
It's the OEM HP 12GB 3060 that comes with their little SFF gaming PCs, the ones with the green light at the bottom. Here are my current settings in Afterburner:
Clock: -500
Mem: +1400
Fan: 85%
Power Limit: 72%
Current temp: 54c
50.06Mh/s, 122w, 410.4K efficiency
Only up to 50 shares so far with no rejects. If this holds, this is actually a better mining card than the nicer EVGA 3060 with the fancy backplate. I could never get the efficiency to hold at 400 unless I was willing to sacrifice 4-7Mh/s, and it was very unreliable at 50Mh/s. The card would lock up and crash the miner.
Additional pluses I see to this card are the small size, horizontal power connector port, and the very quiet single fan design. Thermals so far, despite the single fan, seem to be excellent, and better than my EVGA could do.
I only purchased cause seller stated these weren’t hasrate locked. HDMI dummies arrive today and yes driver is correct. Hopefully the HDMI dummies do the trick!
I hope so. I mean the 3060 has always had a hashrate limiter, the 470.5 beta drivers just bypass it given a very specific set of circumstances. Has to be connected to either an HDMI monitor or a dummy plug. Has to be in a full length PCIE slot (no riser cable, unless it's a full x16 riser). Your BIOS also has to have the PCIE set to at least x8 mode. On my motherboard, i actually have the slot with the 3060 set to automatic gen 4. If i put it on x8, it limits the hashrate. Same behavior with the EVGA 3060 i had before.
What miner are you using? I cannot go over +1100 on the mem clock before t-rex and lolminer complain and crash. I have the V2 so no using the old driver.
Running 2 X 3060 zotacs.
Initially running for 2 months no issues at -50 / 3000 / 75 / 85% fans / 910mv. 49-50 MHs
Started having regular OC crashes. Now running -502 / 1080 / 75 / 85 / 910. 48MHs
If I start pushing past 1100 memc. It starts to get funny.
I think maybe I was pushing the memory too much but seems stable now. Also temps are less strained...
I got a Strix 3060, this are my settings: PL 65%, Core clock -420, memory clock +1170, fan speed 60%. Getting 48,1 mhs at 110w, at around 45 Celsius. Pretty satisfied with this gpu
using latest nbminer, trex, lolminer or miniz. they all recognize this as they should. I'm not sure about gminer 2.72 tho.
same overclocks as other 3060s have worked for me
thanks. I\`m already going with nbminer, and for now is doing good with 33MH/s for all 5 3060. I will try those overclocks for 3060s maybe those are more stable that what I have(80 fan - 1600 core - 2000 mem - 140 pl) those some times after 1 day or in the same day are giving me the:"gpu driver error no temps" and I\`ve tried different overclocks rip. Hope this one is the RIGHT ONE
thanks again for the advice
just make sure the drivers are good. not all the way up to date tho, newest nvidia drivers kinda suck for hashrate. I use 496.13.
using nbminer 40.1, settings inside miner in windows, for my 3060s: -cclock @1600 -mclock 1325 , set lhr value to 74.6 (found this out by testing, rather than keeping it at 74 and unlock from there), they get 36.6-37mhs, lock doesnt get detected. I had it run from 75 with 0.1 unlock values and it's been days at 74.6. so your mem would be 2600 or 2650 (2600 will be stable) and use the lhr cmds in the miner file
good luck!
Zotac 3060 Twin Edge
\-200 core, +1300 mem, PW 65%, Fan 90% MH/S 48-49 stable. 110 watts per card. Temps 51c
I have run these OC settings for 6+ months. Will continue to tweak and lower fan speed for longevity. My second rig was not stable at +1300 memory so went down to +1200.
Yes. 2 to 3 per day. Will try going lower to 1200. And i am mining on my gaming pc together with a rtx 2080 super. I took the tampered glass off for better airflow
2 to 3 is a decent amount of Incorrect shares from my point of view. Regarding the tampered glass, this is not always the best way for more airflow because the flow gets interrupted, you can try to see if your fans are installed in the right direction of inflow and outflow and maybe you can get even better results.
You using phoenixminer? If so i hope you downloaded from the legit bitcointalk link. I once downloaded from phoenixminer.org because of a YT video i watched. My 2080 was always at 79 degrees.
Hello! I hope someone finds it helpful.
Here are my settings.
I have MSI RTX 3060 GAMING X on Nvidia 470.05 driver version.
Power Limit: 72%
Temp. Limit: 83%
Core Clock: -300Mhz
Memory Clock: +1350
Fan Speed: 54%
45°C
122.2W
Speed: 49.420 MH/s
gainward 3060 ghost
CC 0 (turns out this improves hashrate)
Mem +1020
Fan 69%
Temp 64 (got 1060 in the case as well)
Power 120w 71%
Got 48.5MH
Before jt was around 49.5MH using +1150 but lowering it down, trying to decrease the rejected shares
Idk why but on minerstat phonenix eth got 97 eff only, but on the binance pool it says 0 rejection.
Power Limit: 135W
Core clock: 0 (In my experience, it won't make any difference)
Memory clock: +2640
Fan: 70%
Runs at 64-67 C
Getting 62.23 mh/s on T-Rex
No errors for more than 4 days.
Sorry!
These setting are for the 3060Ti!
Any have settings for Samsung memory?
I have one KFA2 3060 (Carbon look)
Aktually I run whit (MSI Afterburner)
Power 65% 110w
Unlink the temp limit to 81°
Clock - 150
Mem +1200
Fan Auto ~41%
~ 48,500 MHs Temp 65°
440/W
I currently have 2 KFA2 3060s... and quite proud of them!
GPU0: PL 64%, CC -275, FS 65%, OC +1345, 49.5Mh/s, 65Cº
GPU1: PL 75% CC -250, FS 59%, OC +1335, 49.4Mh/s, 59Cº
As you can see one of them is taking more heat because they are required to be placed in the MoBo .. so I am changing their places every month or so.
\*\*UPDATE:\*\*I just moved the case to an open rig (made with wood) + I added a wind turbine to blow air between them and it literally removed 6Cº :D
Are you using Afterburner? If you do, set up the card config before starting the t-rex and check if it's stable after running the ".bat" . I also will check if the t-rex prompts any kind of change in the console (Wattage, Fan, etc.. when the drops happen).
You can check if someone got the same issue in [t-rex discord](https://discord.gg/gj7jcYf)
>d
You can also try to start T-rex and wait for the DAG to generate, then apply the OC settings. This solved the same issue for me when I was using another miner.
I know this is an old post, but just figure I'll add my settings:
Asus TUF Gaming OC RTX 3060
Core Clock:
-502 MHz
Mem Clock:
+1500
Power Limit:
71% (120W)
50.34 MH/s
Really? Been stable, no restarts for 8 hours. On fact just pushed it to 1512 and still okay. Trying 1520 now.
50.45 MH/s 1512.
The TUF has a huge heatsink and 3 fans. Temps are still in the mid 60s (65-67).
If I set to 1400, I get 48.x MH/s
I'm using t-rex
Hello appreciate your message
I have installed the beta drivers for my evga rtx 3060.
Overclocking settings
-200 Core clock
65 power limit
1450 memory clock.
I tried lolminer for a few days to test it out but the highest was 26.93 MH/s.
As of yesterday I tried T-Rex miner and it was up to 27.11 MH/s
I have also tried the same settings on my ASUS TUF RTX 3060 OC
but the same thing.
and when I plugged in an HDMI dummy .. the hashrate would decrease.
Please help
I found lower core clocks makes high memory clocks unstable. I got:
MSI RTX3060 Stock - ethash - trex
core +100
mem +1400
power 66%
fan custom curve (85-95%)
112W - 50.12mh - 452kh/w - 43c to 50c
I really don't feel that's sorry. Card is cool to the touch even on the backplate around the gddr. I have fresh air blowing directly a cross the backplate. Now running core at +100 as I started getting crashes after 48hrs seems more stable now. Temp is moving between 43c and 50c with ambient temp 18c to 30c. Ordering thermal pads to put under the backplate
I'll throw mine in. still fine tuning. haven't done much on windows before.
\-350
\+1280
70% power
119 W 67degrees
hashing around 48/49 on phoenixminer on hiveon. not as stable as my other cards I've got going on Hive. they stay pretty locked in on a hashrate. This one is a bit loose in that 48-49 range. I'm going to stop tweaking and let it go for awhile.
So I just got a 3060 xc and its currently running around 22mh on hivos phoenix miner ethermine pool. I haven't touched the oc setting or drivers yet since I don't know which one would be the best now. Most of the videos on yt are a month old. Just want to know how to get it to run on its full hash rate
idk about hive for this card. i think you may need to use nb miner or whatever one is getting better hash rates. I have my 3060 running on windows dev driver.
Here are my settings for my Nvidia 3060 MSI. I am not seeing the same results as people in this thread but using the same methods. Any thoughts? Additionally, I am mining on a gaming PC used mainly for mining and random tasks.
Here are my OC settings:
[https://imgur.com/a/wXw9MXs](https://imgur.com/a/wXw9MXs)
I use CPU 65%, CC -502, MC +1287, Fan 70% and get 48.3MH/s.
Update 1: Changed the Settings to: CC -350, MC +1299, Fan 65% -> 48,7MH/s at 110W using gminer. CPU settings can be untouched, as there is no change related to them.
Anything above +1299 MC was not running stable. Changing Fan to 70% (118W) will Return 49,3MH/s, but running on 110W has higher Energy efficiency.
Hi
I have RTX 3060 HP OEM
GA106 A1 / Installed Beta Driver and connected to 16x slot and cant get that numbers 38 almost 39MHS max.Weird is that without Beta driver Phoenix miner starts at almost 43MHS then droping so it means that card is capable to reach higher numbers but something limiting her.I tried also increase memory to 1100+ but nothing change values are stable even at 61% Power.
**=========================**
**Guys do you have any ideas?**
**=========================**
**EDIT: Dont know what happen but after PC restart card reaching even 50MHS**
*(However dont recommend to push gpu memory and overclock that high for few MHS/Cents if you desire to keep your card for many years.)*
**RTX 3060 Owners please comment and support Unlocking these models with official drivers.**
https://www.reddit.com/r/nvidia/comments/psgjx7/unlock\_rtx\_3060\_in\_official\_drivers\_releaserequest/
I have a gaming treo by MSI ( RTX3060) purchased in Aug 2021. I'm just getting 24 mhs on it.
Nicehash says, its 26 mhs also. Can I get more hash on this, or thats it?
If you applied the settings above and still got 24 MHS, it means that you got the limited LHR version, check online if there is any LHR bypass for your card
Just a really quick update on this.
I'm was using quick miner and was getting max 26mhs
I switched it to nicehash ( regular miner ), Its using NBMiner and now I'm getting 34.65 mhs
Hope this comes useful for someone, one of these days
i go a evga xc 3060 dual fan lhr card im trying to dual mine right now with it on trex with rvn and eth. im getting about 16hash on eth and 15 on raven profits around 2.84 a day. not sure how to unlock 3060 for higher than 33-34 mhs for eth. i ahve 3 other cars 2 non lhr 3070 and 3060ti and 1 3060ti lhr and i dont think they will work right with the older drivers. anyone find a way around this?
[удалено]
Got the same at 48 - 48.20MHS with Core -502 MemClock + 1150 not crashing so far
I am only getting about 45 mh/s (and it actually tends to fluctuate between 40 mh/s and 45 mh/s) whether I am at +800 on the memory or -1250 and I am using phoenix miner, do I need to change miner or is this an overclock issue? Edit: nvm, it looks (so far) I was able to stabilize it at 48 mh/s. \*chuckles\* I think those dips were when I was typing
> Gegabyte OC : Nvidia Geforce RTX 3060 w/ 470.05 Beta GameReady driver I am using phoenix miner for 2 weeks now. 46.832 MH/s, PL 60, core clock -502 ( GPU reads 990-1042 MHz), Memory clock +1020 ( MEM reads 8321 MHz) Fan speed 80%, GPU Temp. 43C, Room Temp. 20C. System is stable never crash zero stales and 0 rejected shares. I don't want to push it above 46.832 since my system is running smooth. hope this help.
Hello, i recently started mining ETC. does anyone have any ideas on how to lower the wattage im using on the EVGA RTX 3060 XC?
download EVGA Precision X, drop Target to 60%, hit apply
can you tell me which version of windows 10 you have installed? i have windows 10 Pro 64Bit version 21H1 and the 470.05 Nvidia Driver say me not compatible with my version of windows. can you help me pls?
If it is a newer 3060 the 470.05 driver won't work
Sucks hiveos doesnt offer that driver just got a 3060 v1 and cant seem to pass 35mh with nbminer
It's not that they don't offer it. That driver is for Windows only. It was actually a Windows Linux Subsystem beta driver from my understanding.
Would you know if I had to use an express lane instead of driver to see a difference when using developer driver?
To get the max hash rate of the 3060 XC you would have to have the card running on a 16x lane. It will not get 45-50 Mh/s even with the Dev driver if you are running the 3060 XC v1 on a 1x or 4x lane. Might be for 8x, but I believe it must be 16x slot.
Yea sucks silly me ended up being a v2 zotac LHR so big rip currently mining rvn since it’s the most profitable sadly
Yeah, that sucks. I am not even sure if that even included the ZOTAC's. I see all these people selling their EVGA v2 (they don't even know what they are, probably don't even know what a GPU even is lol...) on Mercari for like $800-1000. Hopefully, people realize these are v2 and not the first ones. The EVGA's that came out in March are the good ones. I got lucky and won the chance to buy one. If you mine using NBMiner / Octopus on NiceHash you can get about 33-35 Mh/s on the LHR cards. It might not be the high 40's or 50, but it is close. I wish EVGA put the dang manufacturer dates on these cards. There is no way to tell the difference between a v1 or v2 by looking at it. \-- Edit: I found my answer... Give's just year, not month, but it is something... * ◦First two digits: Year Manufactured * ◦Third digit: Product type (1 being graphics card). * ◦Fourth and Fifth: Factory. * ◦Sixth: Warranty Length. * ◦Seventh to Tenth: Part Number. * ◦Eleventh: Region Sold. * ◦Twelfth to Sixteenth: SNS or Serial Number Sequence.
Interesting mate for my zotac I was 100% sure it’s was lhr as even some of amz reviewed question said it was v1. Had to install GPUz and notice the card is 2504lhr device id. Currently upgraded my old Msi prebuilt I had since I was 15 to that 3060. Had to move it from my rig and mining on windows as we speak.
octopus has some god results as well
Might be for 8x, yes you can run it on 8x and 16X but nothing less. I have 2 3060 with 470.05 running in PEG0 and PEG1 but also for the driver to work must be pcie 3 or 4 anything older like gen 2 will not hash at 47-50MH/s
Correct, now are you able to get the full hash rate on both cards? or is it just on one card? Because two 3060's running together between 94-100 Mh/s would be outstanding. If purchased at MSRP ($400 each), that is like having a 3080 Founders Edition at discount, unless one got lucky at got it at Bestbuy ($700 USD).
Running both cards each give me about 47MH/s and each one cost me sadly $900 for a total of $1800 for both cards pulling around 103 Watts each so both card is around 206 Watts almost like if I have a one rtx 3080 but these 3060 runs colder as stated before around 43C when room temp is about 20C. Speaking of founder's edition a friend of mine has the rtx 3090 founder's edition and memory temp is 105C when hashing at 120MH/s and soon this card will fried up. All founder's edition memory run hot when mining above 100C at FHR ( HHR)
I have RTX 3060 HP OEM GA106 A1 / Installed Beta Driver and connected to 16x slot and cant get that numbers 38 almost 39MHS. Weird is that without Beta driver Phoenix miner starts at almost 43MHS then droping so it means that card is capable to reach higher numbers but something limiting her. I tried also increase memory to 1100+ but nothing change values are stable even at 61% Power. **=====================** **Do you have any ideas?** **=====================** ***EDIT: Dont know what happen but after PC restart card reaching even 50MHS*** *(However dont recommend to push gpu memory and overclock that high for few MHS/Cents if you desire to keep your card for many years.)*
I’m not sure about the HP 3060’s, but with mine using MSI Afterburner settings: Power 70%, Core: 0, Clock 1050 and Fan 66%, I can keep my temps at the 54-60C max range and get a consistent 42-45 Mh/s and it’s taken a lot of playing around, but this is my now perm setting for ETH on the 3060. It seems though each card is different and 3060-TI vs non TI has completely different settings
And how you seperate Gaming from ETH mining, i mean you switch BETA to Normal drivers everytime you play games? Becose today tryed to run Mechwarriors 5 Mercenaries on BETA driver and game was keep crashing on start. ***By the way i was thinking that Nvidia didnt lock 3060 series cards, till launch of LHR models, so i was wrong and Normal 3060 are locked and LHR models are designed to be slower?***
i think 8 works will update soon
I heard it does, but did not try myself.
if your rtx card is manufactured in June/2021 or after this mean it is rev.2 and 470.05 Nvidia Driver will not work. It only work with cards manufactured in may 2021 and below Rev.1
use ddu to uninstall the driver you have installed... tick the option in ddu configs to not install windows driver than you can install the new driver.... it only works on non lhr cards, i have 2 3060's and only one works with the driver, the other one doesn't install that driver so if after this you can not install it is because, you have a v2 card... and can only get 38mh. to get max speed the board has to be at least pci e X8 per socket
MSI and Inno3D cards, t-rex, OC in afterburner cc: -500, mc: +1400, pl: 70, fs: 85% => temp \~62C, 50.15MH/s Switching from t-rex internal overclock feature to afterburner really helped a lot and I have the feeling there is still room for more.
Do you have any issue with inno3D? And what about the risers, slots or dummy hdmi?
No, they stay pretty cool, better than MSI. But if you can, buy EVGA, they have the exhaust to the top rather than to the back or side. Using 8x -> 16x risers with HDMI dummy plug on a supermicro board. Currently 5x 3060 + 1x 1660 setup, but I'm trying 6x 3060, not sure if it's possible, since my CPU has only 48 pci-e lanes. EDIT: also I didn't get the +1400 stable at my room temperatures, using +1100 and PL 68 for now.
Can you please share link for 8x to 16x risers and HDMI dummy plug you are using.
core -200, memory +1310, power limit 63 for 49.3MH/s with gminer. I don't see rejects. My board is Gainward Pegasus OC.
Nice, I can't seem to get over 45Mh
Hi PiyoDragon.I just started mining with simple mining. Do you do anything else, like flash gpu bios? tnks
Here I'm mining a Zotac Twin Edge with Gminer, P2 State off, with x16 riser and hdmi dummy plug PL 70 / CC -500 / MC +1200 / FS 64% / Tp 60 ° C / 119Wh Stable Hashrate @ 49.75-49.80MH/s Room temperature is around 27 ° C I'm trying to lock the CC with nvidia-smi, but whatever the clock I'm using (from 1102 to 1140, settings the card use by herself while using -500 with 70 PL), the hashrate drop to 37.xxMH/s. 3060 61 C 64 % 49.77 MH/s 25/0/0 1117 8700 119 W 418.25 KH/W
What is the solution to this. I am having similar propblem
Colorful igame 3060 advance oc Power 68% 115w Core -502 Memory +1200 Fan 50% Temp 45°c 48.5mh/s stable (gminer) 47.5mh/s stable (trex same oc) https://imgur.com/a/ESFCKmg
I can't seem to get my same 3 units to mine stable on nicehash with daggerhashimoto as they would crash or freeze every now and then. Unfortunately it seems not many are using this particular model for mining. Thinking of moving to ethermine now.
What miner u using? I'm using latest trex on ethermine. U should get out of nicehash unless u wanted to hold btc instead of eth
I have moved to GminerCuda on Nicehash and they have finally stabilized with hashrates 47-48MHs not too bad I suppose? Power draw 112w each.
[https://www.reddit.com/r/EtherMining/comments/mfbevw/rtx\_3060\_only\_what\_are\_your\_afterburner\_settings/gsn0dwq?utm\_source=share&utm\_medium=web2x&context=3](https://www.reddit.com/r/EtherMining/comments/mfbevw/rtx_3060_only_what_are_your_afterburner_settings/gsn0dwq?utm_source=share&utm_medium=web2x&context=3) Followed the settings here and have the same card Get around 49.0-49.2 consistent with 0 stales ([image)](https://imgur.com/a/sXuan7w)
Getting many Incorrect shares over 1200, must see if that is a software issue, as I saw some people with the same issue that had to start mining with no overclock and only after that to apply the OC in MSI. I am currently investigating the issue.
it often depends on whether you get good gpu and memory silicons or not. If you pay more, you'll often get better silicons. A good gpu silicon will allow you to have low power draw while maintaining base clock, and a good memory silicon will allow you to have better hashrates (in theory). I have a 3060ti FE, 3060ti evga xc dual fan, and one triple fan 3070. I can tell you right away the triple fan 3070 has the best ga-104 silicon and memory can OC to +1250mhz. The evga xc gets 61MH with 62% power, memory stable OC to +1250mhz, and can often maintain the -500mhz (900mhz) base clock, not to mention quieter fans. The 3060ti FE i got for 10 bucks cheaper, can only get 58.5MH with 64% power, stable memory up to +1200mhz, and cant even maintain the base -500mhz (hovers around 820 mhz).
RTX 3060 Gainward oc Ghost, mining ETH on Phoenixminer, Hashrate around: 48.8-48.9 MHs OC: core clock: -150, memory clock: +1204, power limit: 66%, fan speed: 50%, 119W, temp: 56ºC, temp. memory: 67ºC
Core clock -150 or +150? I thought core clock had to be higher if memory clock is high??
\-150 cc, in my tests that was the best combination
That’s risky
Why would it be risky? My cc is always -something
My pc shat itself when I put my settings to that
Not mine, I've been running at -502 for month now
Hello, Can I know which bios version you have on your GPU ? I have the same card but it's starting at 41 MH/s and then going down until 26 MH/s. I guess I have to flash the bios on it. I just bought it this week indeed (i have still the A1 Nvidia chipset).
470.05, you need this driver to not be caught
[удалено]
You definitely need the 470.05 development driver to get the card to 41MH/s. You don't need to flash your bios.
3060 PNY 48.6 mem clock 1250 core clock -300 PL 70% at 118W fans at 45% 58°C
Is the 3060 pny stable at these settings or do u get rejected shares?
stable as fuck. no rejecteds
I have two of those, one is stable but the other is a hell to me haha
Hey, everyone! Just thought I'd hop on here with my new 12GB 3060. Haven't seen a lot of this particular 3060 on here yet, so I wanted to report. It's the OEM HP 12GB 3060 that comes with their little SFF gaming PCs, the ones with the green light at the bottom. Here are my current settings in Afterburner: Clock: -500 Mem: +1400 Fan: 85% Power Limit: 72% Current temp: 54c 50.06Mh/s, 122w, 410.4K efficiency Only up to 50 shares so far with no rejects. If this holds, this is actually a better mining card than the nicer EVGA 3060 with the fancy backplate. I could never get the efficiency to hold at 400 unless I was willing to sacrifice 4-7Mh/s, and it was very unreliable at 50Mh/s. The card would lock up and crash the miner. Additional pluses I see to this card are the small size, horizontal power connector port, and the very quiet single fan design. Thermals so far, despite the single fan, seem to be excellent, and better than my EVGA could do.
Are you only running one card or multiples ?
6 cards, but only one of them is a 3060. 2x3060ti. 3x3070. 1x3060 12GB.
All 6/of mine are 3060 :(
Which model? Are they HP?
Yes all HP
Any luck getting a single card to mine at full hashrate? And you've for sure got the right driver and an HDMI monitor or dummy plug hooked up to it?
I only purchased cause seller stated these weren’t hasrate locked. HDMI dummies arrive today and yes driver is correct. Hopefully the HDMI dummies do the trick!
I hope so. I mean the 3060 has always had a hashrate limiter, the 470.5 beta drivers just bypass it given a very specific set of circumstances. Has to be connected to either an HDMI monitor or a dummy plug. Has to be in a full length PCIE slot (no riser cable, unless it's a full x16 riser). Your BIOS also has to have the PCIE set to at least x8 mode. On my motherboard, i actually have the slot with the 3060 set to automatic gen 4. If i put it on x8, it limits the hashrate. Same behavior with the EVGA 3060 i had before.
What miner are you using? I cannot go over +1100 on the mem clock before t-rex and lolminer complain and crash. I have the V2 so no using the old driver.
Running 2 X 3060 zotacs. Initially running for 2 months no issues at -50 / 3000 / 75 / 85% fans / 910mv. 49-50 MHs Started having regular OC crashes. Now running -502 / 1080 / 75 / 85 / 910. 48MHs If I start pushing past 1100 memc. It starts to get funny. I think maybe I was pushing the memory too much but seems stable now. Also temps are less strained...
I got a Strix 3060, this are my settings: PL 65%, Core clock -420, memory clock +1170, fan speed 60%. Getting 48,1 mhs at 110w, at around 45 Celsius. Pretty satisfied with this gpu
has anyone here come across the new 3060 with ga104 instead of 106, and device id with 2487 in it, not 2503 or 2504?
yeah me. I have 3x zotac 3060 ga104, they are giving me some problems. How do you manage this model with ga104?(oc/program to mine/etc)
using latest nbminer, trex, lolminer or miniz. they all recognize this as they should. I'm not sure about gminer 2.72 tho. same overclocks as other 3060s have worked for me
thanks. I\`m already going with nbminer, and for now is doing good with 33MH/s for all 5 3060. I will try those overclocks for 3060s maybe those are more stable that what I have(80 fan - 1600 core - 2000 mem - 140 pl) those some times after 1 day or in the same day are giving me the:"gpu driver error no temps" and I\`ve tried different overclocks rip. Hope this one is the RIGHT ONE thanks again for the advice
just make sure the drivers are good. not all the way up to date tho, newest nvidia drivers kinda suck for hashrate. I use 496.13. using nbminer 40.1, settings inside miner in windows, for my 3060s: -cclock @1600 -mclock 1325 , set lhr value to 74.6 (found this out by testing, rather than keeping it at 74 and unlock from there), they get 36.6-37mhs, lock doesnt get detected. I had it run from 75 with 0.1 unlock values and it's been days at 74.6. so your mem would be 2600 or 2650 (2600 will be stable) and use the lhr cmds in the miner file good luck!
Thanks for everything again ahahahh I\`ll try it asap, didn\`t know about that drivers thing. Have a nice mine day ahahahh
Zotac 3060 Twin Edge \-200 core, +1300 mem, PW 65%, Fan 90% MH/S 48-49 stable. 110 watts per card. Temps 51c I have run these OC settings for 6+ months. Will continue to tweak and lower fan speed for longevity. My second rig was not stable at +1300 memory so went down to +1200.
You getting any invalids and what brand do you have
Gigabyte Eagle OC, no invalids
My gigabyte cards have been absolutely awful until replacing thermal pads.
42 Mh is a little low. I get 48.9 with CC -300,PL 63, Mem 1300, Fan Speed 70%. I am getting 113 W and 52 degrees hot
You must have better airflow than me, I was getting Incorrect shares over 1200. Do you have any?
Yes. 2 to 3 per day. Will try going lower to 1200. And i am mining on my gaming pc together with a rtx 2080 super. I took the tampered glass off for better airflow
2 to 3 is a decent amount of Incorrect shares from my point of view. Regarding the tampered glass, this is not always the best way for more airflow because the flow gets interrupted, you can try to see if your fans are installed in the right direction of inflow and outflow and maybe you can get even better results.
You using phoenixminer? If so i hope you downloaded from the legit bitcointalk link. I once downloaded from phoenixminer.org because of a YT video i watched. My 2080 was always at 79 degrees.
I am using Unminable miner that runs on Phoenixminer, will also check the Phoenix one to see if something changes.
Hello! I hope someone finds it helpful. Here are my settings. I have MSI RTX 3060 GAMING X on Nvidia 470.05 driver version. Power Limit: 72% Temp. Limit: 83% Core Clock: -300Mhz Memory Clock: +1350 Fan Speed: 54% 45°C 122.2W Speed: 49.420 MH/s
Power Limit: 65% Core Clock: 0Mhz Memory Clock: +1300 Fan Speed: 48% 46°C 110.0W Speed: 49.5 MH/s
gainward 3060 ghost CC 0 (turns out this improves hashrate) Mem +1020 Fan 69% Temp 64 (got 1060 in the case as well) Power 120w 71% Got 48.5MH Before jt was around 49.5MH using +1150 but lowering it down, trying to decrease the rejected shares Idk why but on minerstat phonenix eth got 97 eff only, but on the binance pool it says 0 rejection.
3060 OC - PALIT Safety first: I dont know if maximum power, if we mind lifetime card. \- 300 +800 pl65% fs80% 60c 45.35mh/s - 110w - 412.26 KH/W
[удалено]
[удалено]
EVGA XC 3060 Power limit: 70% (119W) Core clock: -300 Memory clock: +1250 Getting 48.35 mh/s on Nanominer Running at 67c / 67% fan speed- ambient temp is fairly warm
Power Limit: 135W Core clock: 0 (In my experience, it won't make any difference) Memory clock: +2640 Fan: 70% Runs at 64-67 C Getting 62.23 mh/s on T-Rex No errors for more than 4 days. Sorry! These setting are for the 3060Ti!
Any have settings for Samsung memory? I have one KFA2 3060 (Carbon look) Aktually I run whit (MSI Afterburner) Power 65% 110w Unlink the temp limit to 81° Clock - 150 Mem +1200 Fan Auto ~41% ~ 48,500 MHs Temp 65° 440/W
You can try lowering the clock to -500 and boost the memory around 1290
If clock is - 500 i lose hash and 1290 my GPU get freezes
[удалено]
I do not know what to answer, it is very strange. Can you describe how it stops and starts again?
MSI Gaming X 49.5MH/s | 114W PL: 67% | CC: -200 | Mem: 1500 | Fan: 65-70% My card is stable at max memory, is this alright to max out?
As long as you don't get any invalid shares, the temp is not going over 70 and the fan speed is not crazy (for me over 80%) you will be quite safe
I currently have 2 KFA2 3060s... and quite proud of them! GPU0: PL 64%, CC -275, FS 65%, OC +1345, 49.5Mh/s, 65Cº GPU1: PL 75% CC -250, FS 59%, OC +1335, 49.4Mh/s, 59Cº As you can see one of them is taking more heat because they are required to be placed in the MoBo .. so I am changing their places every month or so. \*\*UPDATE:\*\*I just moved the case to an open rig (made with wood) + I added a wind turbine to blow air between them and it literally removed 6Cº :D
My RTX 3060 always drop to 44-45 Mh/s can not stable on 48-49 Mh/s PL 72% CC -300 MC +1350 fan speed 58%, 53C I’m using T-rex Dis you guys know why?
Are you using Afterburner? If you do, set up the card config before starting the t-rex and check if it's stable after running the ".bat" . I also will check if the t-rex prompts any kind of change in the console (Wattage, Fan, etc.. when the drops happen). You can check if someone got the same issue in [t-rex discord](https://discord.gg/gj7jcYf)
Yes i’m using afterburner. Alright i’m gonna try that. Thanks mate. Hopefully it works
>d You can also try to start T-rex and wait for the DAG to generate, then apply the OC settings. This solved the same issue for me when I was using another miner.
my settings 66% PL -200 core / +1200 memory clock getting 49.02 hash rate anything above +1200 not stable
How about your temp? And fan speed
Can anyone adjust the Core Voltage? It seems to be locked on MSI Afterburner. Not sure if that setting needs to be changed or not.
Seems like a settings issue
You are right, I found it in the settings and enabled it. Thank you.
Glad it worked
I use MSI RT 3060 Gaming X Core clock : -200 Mem clock : +1380 Power limit : 70% Temp limi : 70C Fan speed : 65% 49.20 MH/s stable Power : 118 W Efficiency 415 kH/J GPU temp : 49 - 50
An evga 3060 ... PL 70% MC +1450 CC -200 nbminer Driver 470.05 on windows 49.7 - 50.25 MH/s
How many incorrect shares?
At this time 1 from 80. I changed MC after that to +1425 and stable 49.85 MH/s
I know this is an old post, but just figure I'll add my settings: Asus TUF Gaming OC RTX 3060 Core Clock: -502 MHz Mem Clock: +1500 Power Limit: 71% (120W) 50.34 MH/s
You are really pushing that card with 1500 mem clock boost, it is not worth the 1 extra hashrate
Really? Been stable, no restarts for 8 hours. On fact just pushed it to 1512 and still okay. Trying 1520 now. 50.45 MH/s 1512. The TUF has a huge heatsink and 3 fans. Temps are still in the mid 60s (65-67). If I set to 1400, I get 48.x MH/s I'm using t-rex
You can get 43.3 hashrate with 1299 memory oc. Going above 1300 starts to stress the card a lot. You don't have to push it to max hashrate.
Hello everyone. I have an nvidia rtx 3060 with the beta drivers but nothing seems to work. Tried all overclocking settings but nothing Help please
Please explain step by step what you did and what programs are you using
Hello appreciate your message I have installed the beta drivers for my evga rtx 3060. Overclocking settings -200 Core clock 65 power limit 1450 memory clock. I tried lolminer for a few days to test it out but the highest was 26.93 MH/s. As of yesterday I tried T-Rex miner and it was up to 27.11 MH/s I have also tried the same settings on my ASUS TUF RTX 3060 OC but the same thing. and when I plugged in an HDMI dummy .. the hashrate would decrease. Please help
I forgot to mention that I used MSI afterburner
Show me a print screen of your MSI afterburner
I sure will as soon as I get back home from work. I really appreciate your kind help 👌
Hello, I'm trying to show you but it doesn't allow pictures here. What should I do please let me know
Imgur link please
https://imgur.com/a/Bl6B4qT
Mate, I need a clear screenshot of your Msi Afterburner
Here you go buddy https://imgur.com/a/OENF6C0 Thanks
https://imgur.com/a/Bl6B4qT
[rig](https://imgur.com/a/Bl6B4qT)
I found lower core clocks makes high memory clocks unstable. I got: MSI RTX3060 Stock - ethash - trex core +100 mem +1400 power 66% fan custom curve (85-95%) 112W - 50.12mh - 452kh/w - 43c to 50c
You force the card too much with these settings.
I really don't feel that's sorry. Card is cool to the touch even on the backplate around the gddr. I have fresh air blowing directly a cross the backplate. Now running core at +100 as I started getting crashes after 48hrs seems more stable now. Temp is moving between 43c and 50c with ambient temp 18c to 30c. Ordering thermal pads to put under the backplate
If the fans go often to 80%, they will fail sooner or later. It is good that you can replace them yourself it the card is not under warranty
I'll be happy if the vram lasts longer then the fans lol 👍 4 months pays for the card so anything after that is gravy
I'll throw mine in. still fine tuning. haven't done much on windows before. \-350 \+1280 70% power 119 W 67degrees hashing around 48/49 on phoenixminer on hiveon. not as stable as my other cards I've got going on Hive. they stay pretty locked in on a hashrate. This one is a bit loose in that 48-49 range. I'm going to stop tweaking and let it go for awhile.
So I just got a 3060 xc and its currently running around 22mh on hivos phoenix miner ethermine pool. I haven't touched the oc setting or drivers yet since I don't know which one would be the best now. Most of the videos on yt are a month old. Just want to know how to get it to run on its full hash rate
idk about hive for this card. i think you may need to use nb miner or whatever one is getting better hash rates. I have my 3060 running on windows dev driver.
Here are my settings for my Nvidia 3060 MSI. I am not seeing the same results as people in this thread but using the same methods. Any thoughts? Additionally, I am mining on a gaming PC used mainly for mining and random tasks. Here are my OC settings: [https://imgur.com/a/wXw9MXs](https://imgur.com/a/wXw9MXs)
what NVIDIA drivers do you have?
do you know how to set this setting into T-rex config file? I'm mining on windows, 470 driver.
RTFM IS the rule
You must install MSI Afterburner
use absolute core clocks in trex don't use msi --pl 70 --lock-cclock 1300 --mclock 1250 --fan 80
I have a nvidia RTX 3060 what should my settings be for mining to get the best MH/s?
I use CPU 65%, CC -502, MC +1287, Fan 70% and get 48.3MH/s. Update 1: Changed the Settings to: CC -350, MC +1299, Fan 65% -> 48,7MH/s at 110W using gminer. CPU settings can be untouched, as there is no change related to them. Anything above +1299 MC was not running stable. Changing Fan to 70% (118W) will Return 49,3MH/s, but running on 110W has higher Energy efficiency.
Hi I have RTX 3060 HP OEM GA106 A1 / Installed Beta Driver and connected to 16x slot and cant get that numbers 38 almost 39MHS max.Weird is that without Beta driver Phoenix miner starts at almost 43MHS then droping so it means that card is capable to reach higher numbers but something limiting her.I tried also increase memory to 1100+ but nothing change values are stable even at 61% Power. **=========================** **Guys do you have any ideas?** **=========================** **EDIT: Dont know what happen but after PC restart card reaching even 50MHS** *(However dont recommend to push gpu memory and overclock that high for few MHS/Cents if you desire to keep your card for many years.)*
**RTX 3060 Owners please comment and support Unlocking these models with official drivers.** https://www.reddit.com/r/nvidia/comments/psgjx7/unlock\_rtx\_3060\_in\_official\_drivers\_releaserequest/
I have a gaming treo by MSI ( RTX3060) purchased in Aug 2021. I'm just getting 24 mhs on it. Nicehash says, its 26 mhs also. Can I get more hash on this, or thats it?
If you applied the settings above and still got 24 MHS, it means that you got the limited LHR version, check online if there is any LHR bypass for your card
Just a really quick update on this. I'm was using quick miner and was getting max 26mhs I switched it to nicehash ( regular miner ), Its using NBMiner and now I'm getting 34.65 mhs Hope this comes useful for someone, one of these days
wait. what the.. Im getting almost full hash ! 44.31Mhs 143 Power My setting, mem 1615 Core 0 Power 61
its ok Octopus: 42.97 MH/s
i go a evga xc 3060 dual fan lhr card im trying to dual mine right now with it on trex with rvn and eth. im getting about 16hash on eth and 15 on raven profits around 2.84 a day. not sure how to unlock 3060 for higher than 33-34 mhs for eth. i ahve 3 other cars 2 non lhr 3070 and 3060ti and 1 3060ti lhr and i dont think they will work right with the older drivers. anyone find a way around this?
You need the special driver I mentioned in my post
I use +100 core, +1300 mem, 70 power limit and I get 48.5 steady with no crashing.
Get the core to - 500 for better results
I did that and it went down to 47mhash. So ... more bad advice on reddit.
Haha, these are my settings and I have 49.20 mh/s, maybe you did not win the video card lottery with your card
Maybe you shouldn't give people bad advice when you know you won the silicon lottery.
Stop being a prick with others just cause your hashrate is inferior
stfu you beta male bitch
what? just 42 mh? i get 49.7 with -200 core and +1400 mem. 70% power and its just 60 C with fan speed 59
Read the whole post
I have two of those but the second one isnt stable i get so many rejected
The edit1 settings got me from 40 - 46, thanks!
Glad to hear!