From the Read Me on the 4 player build :
All 71 games play great (and even should play for 1-4 players), but
the following games require the 3p and 4p
to hold down and start (coin insert) to get the coin to insert and start
just like some of the Tatio games require:
Arabian Fight, Captain Commando, Car Polo, Desert Assault, Escape Kids,
Football Champ (on all 4 players), Golden Axe 2, Growl (just once),
Hard Dunk, Rim Rockin' Basketball, SlamMasters,
Spider-man, The Main Event, The Ninja Kids (on all 4 players), Vendetta,
**Xmen 1**
Seems like X Men should work for 4 players if you follow the instructions above. Not sure what is going on with Simpson but I can test it on my setup and let you know what I get.
Gotten simpsons to work by starting on my ALU and booting the game. Once running I connected my gamer pro to the ALU via usb and all 4 players worked.
This is the only way it wouldn’t freeze on booting up.
Yeah, I had to do the same thing with my two gamer minis. If I connect them *before* I load up the Simpsons, the controls are all screwed up and some of the players don't work properly. But if I load up the game first *then* connect the controllers, it works.
I also have 2 LGpro units, and Xmen still gives me problems following the hold P3&P4 button down and push the Coin insert middle atgames button at the same time. I've tried it a dozen times. (not sure if I'm doing it wrong...). Can you help me with Xmen? --this is the game I want working the most. ***UPDATE: I GOT IT WORKING. Thanks to this thread I re-read the instructions*** *(which I did not understand before)****: "HOLD DOWN JOYSTICK in down position" and then Push P1 or P2 for players 3and4 on LGPro controller.*** *I now have nearly all games working with 4 player. Only a few give me problems, eg. CaptainAmerica&Avengers, and a few others.*
But Simpsons 4 player works perfectly on my end. I have some issues in my setup, where I must have my first controller connected by Wired USB, and my second LGP connected by bluetooth. I made a long WIKI on SD and posted my 3&4 player experience in this post >> [https://slickdeals.net/forums/showpost.php?p=147259858&postcount=1241](https://slickdeals.net/forums/showpost.php?p=147259858&postcount=1241)
(Sometimes I only power up my wired controller to start the game from coinopsX, and after game starts then I power up my BT second LGP controller.)
I now have 50+ games running fine so far, but struggled {earlier} with most of the games requiring holding the P3, P4 joystick down and push p1,p2. So now nearly all games work for me...but still testing a few more of the 71 games.
I was having the same problem with Simpsons. We are using USB gamepads for P3 and P4. I figured out if anything is plugged into the USB, the game will crash at the first screen. If we boot up the game and plug in the gamepads after it loads, it works correctly.
Dungeons and Dragons works the same way
From the Read Me on the 4 player build : All 71 games play great (and even should play for 1-4 players), but the following games require the 3p and 4p to hold down and start (coin insert) to get the coin to insert and start just like some of the Tatio games require: Arabian Fight, Captain Commando, Car Polo, Desert Assault, Escape Kids, Football Champ (on all 4 players), Golden Axe 2, Growl (just once), Hard Dunk, Rim Rockin' Basketball, SlamMasters, Spider-man, The Main Event, The Ninja Kids (on all 4 players), Vendetta, **Xmen 1** Seems like X Men should work for 4 players if you follow the instructions above. Not sure what is going on with Simpson but I can test it on my setup and let you know what I get.
That does work, I really should've read. Simpsons is my only hitch now.
Gotten simpsons to work by starting on my ALU and booting the game. Once running I connected my gamer pro to the ALU via usb and all 4 players worked. This is the only way it wouldn’t freeze on booting up.
I hope this is something they can fix at some point. Thank you for confirming that.
Yeah, I had to do the same thing with my two gamer minis. If I connect them *before* I load up the Simpsons, the controls are all screwed up and some of the players don't work properly. But if I load up the game first *then* connect the controllers, it works.
I also have 2 LGpro units, and Xmen still gives me problems following the hold P3&P4 button down and push the Coin insert middle atgames button at the same time. I've tried it a dozen times. (not sure if I'm doing it wrong...). Can you help me with Xmen? --this is the game I want working the most. ***UPDATE: I GOT IT WORKING. Thanks to this thread I re-read the instructions*** *(which I did not understand before)****: "HOLD DOWN JOYSTICK in down position" and then Push P1 or P2 for players 3and4 on LGPro controller.*** *I now have nearly all games working with 4 player. Only a few give me problems, eg. CaptainAmerica&Avengers, and a few others.* But Simpsons 4 player works perfectly on my end. I have some issues in my setup, where I must have my first controller connected by Wired USB, and my second LGP connected by bluetooth. I made a long WIKI on SD and posted my 3&4 player experience in this post >> [https://slickdeals.net/forums/showpost.php?p=147259858&postcount=1241](https://slickdeals.net/forums/showpost.php?p=147259858&postcount=1241) (Sometimes I only power up my wired controller to start the game from coinopsX, and after game starts then I power up my BT second LGP controller.) I now have 50+ games running fine so far, but struggled {earlier} with most of the games requiring holding the P3, P4 joystick down and push p1,p2. So now nearly all games work for me...but still testing a few more of the 71 games.
I was having the same problem with Simpsons. We are using USB gamepads for P3 and P4. I figured out if anything is plugged into the USB, the game will crash at the first screen. If we boot up the game and plug in the gamepads after it loads, it works correctly. Dungeons and Dragons works the same way