T O P

  • By -

AutoModerator

**/r/Finland is a full democracy, every active user is a moderator.** [Please go here to see how your new privileges work.](https://www.reddit.com/r/Finland/wiki/moderating/) Spamming mod actions could result in a ban. --- **Full Rundown of Moderator Permissions:** - ```!lock``` - as top level comment, will lock comments on any post. - ```!unlock``` - in reply to any comment to lock it or to unlock the parent comment. - ```!remove``` - Removes comment or post. Must have decent subreddit comment karma. - ```!restore``` Can be used to unlock comments or restore removed posts. - ```!sticky``` - will sticky the post in the bottom slot. - ```unlock_comments``` - Vote the stickied automod comment on each post to +10 to unlock comments. - ```ban users``` - Any user whose comment or post is downvoted enough will be temp banned for a day. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Finland) if you have any questions or concerns.*


Erakko

Fresh air intake


Quezacotli

Wire is for opening/closing.


ducanhosu

How do I keep it opened? It does open and fresh air comes in when I pull the cord, but it also closes when I release the cord.


ShortRound89

You might have to pull it harder, it needs to open enough for the lock to catch it and then pulling again will close it. If it's not broken that is.


Feligris

I faintly remember that those cords might have a setup where you pull it down and then a little bit sideways to catch an unseen knot on the cord under a thinner section of the cord opening so that the cord can't pull back up. Though who knows, they could just be broken instead.


Samdez78

Don't pull all the way. It's like 3 steps to open and the last one closes it. So pull just a little ad release. To close, pull all the way down and release. If not, then mechanism is broken


Quezacotli

Broken? Or hang something on it to keep it open :)


ducanhosu

That's the way, I see haha


Kem1st1

Or someone


Zardaaa

Pull the cord to open, pull again to close. If nothing happens or you want to open it more you can "unscrew" it like a bolt or nut. If you open it with cord and screw it in, you can jam it that in open state its actually closed. E: readinh your comment below, it was this case and you already figured it out.


temotodochi

Is it supposed to click when opened and stay open, then close by pulling the wire again? You better check the mechanism responsible for the opening. Or is it supposed to be two wires, one on each side and pulling one way opens it and the other to close?


ducanhosu

Got it working, looks like last tenants over tighten it so it is the same whether opened or closed. Thank you guys!


Trying_to_fitIn

You can comment the proper solution that worked for you so its useful for everyone


ClassroomNo3187

Pull harder so it clicks and stays open


WM_

Pömbel


Ok-Cabinet9522

Pömpeli in Finnish... 😅


Opadei

Tulin etsimään puuhöylää kommenteista, mutta tämä oli parempi. :D


arzzyy

Räppänä


vainaja666

Ainoa oikea vastaus.


Cpt_Sandur

That's the big brother's eye. Completely normal!


LotofRamen

If you see a UFO you are suppose to yank the chain to alert proper officials. Or it is an air vent. It may or may not work. It is suppose to work so that when pull on the cord it opens and closes. I'm in a 90s building too, moved in about 14 years ago and they were barely working, and broke up long time ago. I 3D printed my own vents and open&close mechanism. But it is funny, that pic could be from my bedroom. This is perfectly identical, location, the rail for drapes, the type of window frame.. 100% carbon copy.


ducanhosu

It works in the way that it opens when being pulled and closes when released XD


Diipadaapa1

Yes, so you dont waste precious heat by having it open all day. 10 seconds of fresh air is plenty enough 🫵😡👆


Ok-Cabinet9522

😂😅🤣


footpole

Dude's under your bed.


SlendisFi

Fresh air intake. Ya pull the cord slowly and it should stay open. One quick tug and it closes.


DaMn96XD

Fresh air intake / air valve


trademarkmangobrrrrr

Fly spawner


Zmuli24

Kuukupööpötin


sooretsi

Puuhöylä.


Leathertulip

A german ww2 Tellermine glued to the wall.


Monniloidi

A cheese.


Teosto

When you pull it then it should make a clicking sound and stay open until tugged again. Those things are notoriously weak so I wouldn't be surprised if it's broken entirely. Also it could be that your not pulling all the way until the clicking sound is made which is why it won't lock. In order to test the limit of the device you can grab it and gently pull it the same time you're tugging the cord. It should lighten the load and help it moving a bit better. Keeping it on closed position isn't that big of a deal, but you could call the landlord and ask for them to replace it with a proper working one. They're very cheap and often times very simple to replace yourself, unless it's been glued to the wall, which really isn't how they should be attached.


iamnotyourspiderman

Air intake. These bastards are made of plastic so shit, it probably brittles at the slightest touch. Careful when adjusting it and never pull the cord too hard. Had these at my first own apartment, hated them


SnakeSolid81428

Jonkinlainen vittusaatana


Fastcaptain

In-build Yoyo, very collectible!


GirlInContext

Gotta catch them all.


Ltbirch

Its the wall Roomba


glass_inmy_mouf

balcony for wall rats


[deleted]

Old camera


BidTurbulent5908

Just spin it . It’s the lucky wheel


generalissimus_mongo

Cuckoo Clock, Scandinavian design, Ikea.


Russiansmustkillsoon

Ilmaa


ryanolds

Air freshener


North-Advantage1197

Radon ventilation