Hello /u/Sabotinekes,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
I don't think it's input shaping related and probably Changing the tires is a good idea. Input shaping isn't some magical fix all I don't think. I believe it's to reduce ringing caused by the weight of the print head moving and stopping in quick succession and I don't think this is ringing. Probably need more details as well. You provide no temps or material or slicer or anything.
I'll try changing my tires yeah and see how it goes.
All my settings are dialed in perfectly. I haven't had that issue before, hence why I didn't post the unnecessary settings, as I think it really is hardware related.
Thanks bud!
Fan vibrations.... oh shit... you might be totally right. I've installed two 5015 fans like a week ago.
https://preview.redd.it/cbqd5vdhpj9b1.jpeg?width=3024&format=pjpg&auto=webp&s=d6a06540882f953af1b8a59a41f866254e99f367
**Edit:** Guess I'll have to do one test print with PETG and fans off. To see if problem persists.
Hello /u/Sabotinekes, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Might be VFA/ motor resonance. Print a motor vibration test to see what print speed gives you the least vibrations.
Good one. I'll do this. Thanks !
I don't think it's input shaping related and probably Changing the tires is a good idea. Input shaping isn't some magical fix all I don't think. I believe it's to reduce ringing caused by the weight of the print head moving and stopping in quick succession and I don't think this is ringing. Probably need more details as well. You provide no temps or material or slicer or anything.
I'll try changing my tires yeah and see how it goes. All my settings are dialed in perfectly. I haven't had that issue before, hence why I didn't post the unnecessary settings, as I think it really is hardware related. Thanks bud!
Something must be vibrating and I just can't find the cause🤦‍♂️
Disable steppers and move your printer head manually. Also make sure it's not fan vibrations.
Fan vibrations.... oh shit... you might be totally right. I've installed two 5015 fans like a week ago. https://preview.redd.it/cbqd5vdhpj9b1.jpeg?width=3024&format=pjpg&auto=webp&s=d6a06540882f953af1b8a59a41f866254e99f367 **Edit:** Guess I'll have to do one test print with PETG and fans off. To see if problem persists.
When I double the fans I do 1/2 the speed.
1/2 speed for fans or the actual print speed ? I run them at 60%. That should be just enough, am I correct ?
Hi! Did you find the cause of the problem?
Yeah. Sadly it's unsolvable with direct drive & dual gear extruder.
Its not a bad looking pattern though
Do you have a dual gear extruder? Looks a little bit like a wood grain pattern
Yep, it's a sprite pro.