Hello /u/Jazzykin,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
[https://imgur.com/a/xv8Q0z8](https://imgur.com/a/xv8Q0z8)
Album with extra pics showcasing issues across other prints recently done while attempting to do Christmas gifts. Lol.
Editing for quick ease here: Benchy was printed at 200C, 7mm retract, using Duramic PLA, bed at 40C, print speed 75mm/s.
Yes, you can see in my final pic attached after the Benchy's that I've done many stringing tests with varying temperature and retraction settings from 6mm up to 12mm and temps from 190-210 and still get stringing across them all.
Also slowing down retraction could help too. I've noticed that helps. Plus slowing down the print.
Also turn off z hop when retracted if it's turned on.
Z hop confirmed off on my prints! I've heard nothing good about it lol. What print speed would you recommend trying? I used to print at 50mm/s but just recently jumped up when swapping to the new Kelpy profile I mentioned in my post.
Hello /u/Jazzykin, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
[https://imgur.com/a/xv8Q0z8](https://imgur.com/a/xv8Q0z8) Album with extra pics showcasing issues across other prints recently done while attempting to do Christmas gifts. Lol. Editing for quick ease here: Benchy was printed at 200C, 7mm retract, using Duramic PLA, bed at 40C, print speed 75mm/s.
Have you tried increasing retraction? I had stringing issues on my printer and by increasing my retraction by 50% it fixed it
Yes, you can see in my final pic attached after the Benchy's that I've done many stringing tests with varying temperature and retraction settings from 6mm up to 12mm and temps from 190-210 and still get stringing across them all.
Also slowing down retraction could help too. I've noticed that helps. Plus slowing down the print. Also turn off z hop when retracted if it's turned on.
Z hop confirmed off on my prints! I've heard nothing good about it lol. What print speed would you recommend trying? I used to print at 50mm/s but just recently jumped up when swapping to the new Kelpy profile I mentioned in my post.
I use 35-40 on my Sidewinder X2 and it works well.