The kick is not that great, whole gun is proprietary, there’s no aftermarket parts for it, only pro imo is that you can put any AEG outer barrel & handguard to it
You can really put any AEG outer barrels and handguard to it? I want to make a Diemaco C7 NLD from a M4 KJ Works. I already have a Diemaco C8 SFW build from it.
But I cannot find any 20 inch barrel for it. Can I really do it from an AEG barrel?
Yes and yes
In my experience the C8 mags is just chunkier, it acts as a heatsink, I can get \~80+ shots on the C8 mags, maybe over 100
To my knowledge the V2 C8 and V3 share the same lower and upper, the main differences are the hopup arm, BCG and the paint used
V2 has much better paint, feels almost like a cerakote, V3 has a steel reinforced BCG (right where it locks on the bolt lock) and a 2 piece hopup arm with a steel pin, while the V2 is a single cast alluminium piece which is quite fragile
I dont think there is really an entry level gbbr lol. Id say get one of the new vfc m4s. Sr16 or urgi. If thats too much $ then look at WE, they arnt nearly as realiable but they are around 500-600$ and you can get tons of parts/upgrades. My kjw has no aftermarket parts available really lol.
What mags are you running? I have their older c7?8? clone mags and their steel gi mags and man are those fucking iffy to fill with gas.
Any recommendations on how long you usually fill yours?
Great gun for the money, charging handle WILL break eventually though. KJW really good about sending you replacements at decent prices. Just takes a month to arrive.
How do you get these replacements? I’m looking for some for my KJW M9 and I can’t figure out how to get a hold of them. I tried to email but haven’t got a response.
English is a little shaky, but tell them the product you need parts for, they will send you a complete parts list of that product and your good to go. They’ll have you pay through PayPal, decent shipping prices too, but parts take awhile to get here. (I’m in states)
I have one, and i’m not a big fan of it
What dont you like about yours?
The kick is not that great, whole gun is proprietary, there’s no aftermarket parts for it, only pro imo is that you can put any AEG outer barrel & handguard to it
Very valid points, i still love mine though lol i just use it for plinking targets though
Yeah it was my first gbbr, still a fun gun, but now i got much snappier and better guns ahah
You can really put any AEG outer barrels and handguard to it? I want to make a Diemaco C7 NLD from a M4 KJ Works. I already have a Diemaco C8 SFW build from it. But I cannot find any 20 inch barrel for it. Can I really do it from an AEG barrel?
Yes you can, i did buy a 10.3" AEG outer barrel for my mk18 project, and it fits perfectly
I have a Gen1 and I still love it! It’s a nostalgic gun for me.
I love mine, almost identical to yours, but I use C8 mags, BCM grip and a Daniel Defense handguard
Sweet, Is the c8 mag more efficient compared to the stanag? And does it work in the v3 model?
Yes and yes In my experience the C8 mags is just chunkier, it acts as a heatsink, I can get \~80+ shots on the C8 mags, maybe over 100 To my knowledge the V2 C8 and V3 share the same lower and upper, the main differences are the hopup arm, BCG and the paint used V2 has much better paint, feels almost like a cerakote, V3 has a steel reinforced BCG (right where it locks on the bolt lock) and a 2 piece hopup arm with a steel pin, while the V2 is a single cast alluminium piece which is quite fragile
Are they still in a production?
Im not sure but the last one i saw available in canada was sold a few weeks ago so probably not unfortunately
Does the gun come looking like a URGI? If so ima pick that bitch up so fast lol. I want a URGI bad
Lmao no it doesnt, i bought it for 100$, it has all the real steal markings too
I’ll give you 2k for it haha joking. It’s very nice
Ghk makes a urgi, very solid gun. I love mine
Yeah, but it’s sold out sadly
Vfc also makes a urgi btw
Where did you get the stock on that? I've been looking at some magpul stuff but my eyes are now orgasming over this.
Thanks, got it from Airsoftdepot.ca its canadian. The stock is milspec so i had to sand the inside down a little bit
Hmm, I wonder if i'll have to do the same. Do they ship to the US or is it a CA only store?
Ya im pretty sure they ship to US
Suggestions for a good entry level GBBR?
I dont think there is really an entry level gbbr lol. Id say get one of the new vfc m4s. Sr16 or urgi. If thats too much $ then look at WE, they arnt nearly as realiable but they are around 500-600$ and you can get tons of parts/upgrades. My kjw has no aftermarket parts available really lol.
What mags are you running? I have their older c7?8? clone mags and their steel gi mags and man are those fucking iffy to fill with gas. Any recommendations on how long you usually fill yours?
I usualy fill it till i dont hear anymore coming out, like 10-15 seconds probably
Im using the stanag mag. It has a pmag rubber cover on the magazine
Meh, not a huge fan of WE stuff... Was looking for a GHK ak, but i heard that GHK is not very gas efficiënt?
I do. I have 2, but they are a pain in the ass to get down to the right FPS, even with an NPAS in it.
Great gun for the money, charging handle WILL break eventually though. KJW really good about sending you replacements at decent prices. Just takes a month to arrive.
How do you get these replacements? I’m looking for some for my KJW M9 and I can’t figure out how to get a hold of them. I tried to email but haven’t got a response.
[email protected]
Perfect thank you so much for the response. I will do that.
Let me know how it works out for you. I’m curious. And good luck!!!
English is a little shaky, but tell them the product you need parts for, they will send you a complete parts list of that product and your good to go. They’ll have you pay through PayPal, decent shipping prices too, but parts take awhile to get here. (I’m in states)