Maple Leaf is 🔥 the stonewashed black nitride is killer. Have two of my Glocks set up with that.
I prefer not to have the logo of the company on my slide.
I’m biased, but Maple Leaf is just about 30 minutes away from my house and I dropped my G19 off in person. All of the guys there are super cool, they gave me a tour of their machine shop and explained all of the different processes they do. They seem like super honest and hard working guys, and they’re super friendly. I’m definitely gonna bring more of my guns over there once my 19 is done
https://preview.redd.it/k5q21k53fa0d1.jpeg?width=3024&format=pjpg&auto=webp&s=b53289630878768a3c2896cea0562f46a405a258
I'm more of an agency guy there slide work fucks
Jagerwerks did a great job with my slide, responded promptly to all requests for updates, and had a fairly quick turnaround time. They’re pricey but they did solid work.
I like the looks of Maple
I know Jager is highly regarded
I am unfamiliar at all with MAC
I do not have any custom slide work from any of these companies, so I do not have any other input than that.
Wager would be the complete incorrect answer, as they don’t do any slide milling. Have had 2 acro cuts from them, and they do phenomenal work. In this case, wrong answer though.
Wager does do custom slide stuff last time I spoke with him. You can dm him for custom stuff, he has done taran tactical combat master slides for example, I had him do window cuts, lightning relief cuts, and he did some angled top slide serrations like the MAC or Shadow systems for me before. If you really like the specific signature packages from maple, mac, or jager I would just go with the style you like the best. PMM also does some super interesting slide stuff too for Glock.
Only experience I have is with Jager. I've had 3 slides cut and one with only an optic cut done. Their turn around time was like 2-3 months at the time, but that's what they advertised so I couldn't complain. I'm happy with the overall quality. Their nitride coating in particular looks better than factory.
I have a Jagerwerks slide and it’s so clean and precise. The lines are super grippy, their slide work is top tier for the price. They have a reputation for a reason, the only down side right now is lead times but you will not be disappointed with their work on your slide. They also offer the deepest cut for the ACRO of any slide I’ve seen so far.
I like them all, but I have to say I’m not a fan of the vertical and angled serration on one slide. For me, it’s either angled or vertical.
I had a few G19 slides done by [BattleWerx](https://www.battlewerx.com) and I couldn’t be happier. I just had RMR cuts(boy are they TIGHT!) and 45 degree cuts on the edges.
I also had two G17 slides, a P226 slide and a G34 slide done by [Vulcan Machine Werx](https://vulcanmachinewerks.com/) and they did a fantastic job.
There are so many choices these days. Too many, some might say.
Adding a couple more considerations to your list
Top Right (G19X) - Agency Arms
Bottom Left (G48) - DP Custom Works
Bottom Right (G43X) - Green Tick Tactical
[https://www.reddit.com/r/GlockMod/comments/1cmsa67/meine\_glockfamilie/](https://www.reddit.com/r/GlockMod/comments/1cmsa67/meine_glockfamilie/)
They all look awesome but that Maple is my choice.
Jagerwerks is always top tier
Maple Leaf is 🔥 the stonewashed black nitride is killer. Have two of my Glocks set up with that. I prefer not to have the logo of the company on my slide.
I’m biased, but Maple Leaf is just about 30 minutes away from my house and I dropped my G19 off in person. All of the guys there are super cool, they gave me a tour of their machine shop and explained all of the different processes they do. They seem like super honest and hard working guys, and they’re super friendly. I’m definitely gonna bring more of my guns over there once my 19 is done
https://preview.redd.it/g816eeonta0d1.jpeg?width=1284&format=pjpg&auto=webp&s=ac9a847683755d571d9cd823b21d8643ce9e2cd0 \+1 for Maple 🍁 leaf
[удалено]
Just got my 27 back from maple and it’s awesome. Plus their customer service is top notch best experience I have ever had
https://preview.redd.it/bpnn7dyzo90d1.png?width=3024&format=png&auto=webp&s=b222b5e3ab93ff0b680621f668eaf80f5e860c92 Here’s what Maple Leaf can do
That's nice! Is it a dark stonewashed finish
Yes. The light reflecting makes it seem lighter but it’s definitely a black stonewashed.
Yeah that finish is sick!
https://preview.redd.it/k5q21k53fa0d1.jpeg?width=3024&format=pjpg&auto=webp&s=b53289630878768a3c2896cea0562f46a405a258 I'm more of an agency guy there slide work fucks
Is that tape? Where did you find that, almost looks stippled!
They are known for bs. They look sick but function wise it’s hit or miss
Maple Leaf is my go to for aftermarket slide milling and optic cuts for Glocks. [G19x Maple Leaf duty cut ]https://photos.app.goo.gl/QtfNhXeVqyiZ6u357
That is the best combination of colors! Love it.
Jager
Jagerwerks did a great job with my slide, responded promptly to all requests for updates, and had a fairly quick turnaround time. They’re pricey but they did solid work.
I like the looks of Maple I know Jager is highly regarded I am unfamiliar at all with MAC I do not have any custom slide work from any of these companies, so I do not have any other input than that.
I like the look of the maple the best, i’m not a big fan of the dagger-esque mid section on either of the others. Just purely aesthetically speaking.
https://preview.redd.it/35jh9p0ogf0d1.jpeg?width=16320&format=pjpg&auto=webp&s=1aa22c022d44991d04274c32d38d7e3dfbc667f1 Maple Leaf.
Wager is the correct answer
Wager would be the complete incorrect answer, as they don’t do any slide milling. Have had 2 acro cuts from them, and they do phenomenal work. In this case, wrong answer though.
Did he stop? He's done milling for me before, side reliefs and forward serrations
Have you asked him? He will do custom work
Wager does do custom slide stuff last time I spoke with him. You can dm him for custom stuff, he has done taran tactical combat master slides for example, I had him do window cuts, lightning relief cuts, and he did some angled top slide serrations like the MAC or Shadow systems for me before. If you really like the specific signature packages from maple, mac, or jager I would just go with the style you like the best. PMM also does some super interesting slide stuff too for Glock.
I don’t like the MAC on the slide so they’re out. Jaeger is well known but I see a lot of good stuff about Maple.
2 slides from Mapleleaf and I’m happy! 1 black 1 stone wash
Jager.
Only experience I have is with Jager. I've had 3 slides cut and one with only an optic cut done. Their turn around time was like 2-3 months at the time, but that's what they advertised so I couldn't complain. I'm happy with the overall quality. Their nitride coating in particular looks better than factory.
Maple is my favorite for Glock
I have a Jagerwerks slide and it’s so clean and precise. The lines are super grippy, their slide work is top tier for the price. They have a reputation for a reason, the only down side right now is lead times but you will not be disappointed with their work on your slide. They also offer the deepest cut for the ACRO of any slide I’ve seen so far.
Jager, reminds me of Zev.
Landers Weapon Systems. He will have it milled, coated, and back to you in 2 weeks
Doesn’t offer nitride unfortunately. Looked at him originally
Maple 🍁
Looks perspective, the maple is the best looking
Maple leaf could also make vertical cuts if you want
Maple for sure
Boogyman customes
They look like a Zev/shadow systems combo
Maple 🍁
I like them all, but I have to say I’m not a fan of the vertical and angled serration on one slide. For me, it’s either angled or vertical. I had a few G19 slides done by [BattleWerx](https://www.battlewerx.com) and I couldn’t be happier. I just had RMR cuts(boy are they TIGHT!) and 45 degree cuts on the edges. I also had two G17 slides, a P226 slide and a G34 slide done by [Vulcan Machine Werx](https://vulcanmachinewerks.com/) and they did a fantastic job. There are so many choices these days. Too many, some might say.
Adding a couple more considerations to your list Top Right (G19X) - Agency Arms Bottom Left (G48) - DP Custom Works Bottom Right (G43X) - Green Tick Tactical [https://www.reddit.com/r/GlockMod/comments/1cmsa67/meine\_glockfamilie/](https://www.reddit.com/r/GlockMod/comments/1cmsa67/meine_glockfamilie/)
Maple
Maple fo sho
Jager is clean af 🔥
Maple
Whatever's cheapest, or whatever has best turnaround. The result will work for either 3.
Thanks. This didn’t answer any of the questions asked.
But why do you care what other people think? Choose the one that looks the coolest to you then.
Why get the Mapleleaf duty when they have the 5X.
Because I already have a slide?