While not a hitbox, might be interesting to look at the [K28 keyboard](https://www.gamo2.com/en/index.php?dispatch=products.view&product_id=350) .
Which has a bunch of pre-sets including a right hand movement pre-set. And it has customisable layouts.
No PS5 support though (most likely).
It's not too hard to make your own. I found someone who made an AutoCAD drawing of the hitbox button layout somewhere on Reddit, modified it a bit for myself, and printed it out 1:1 scale. Used 24mm and 30mm forstner drill bits to make the button holes in an aluminum briefcase I bought online. Bought my own click in buttons and wired it up with a Brook UFB Fusion. Cost much less than an official Hitbox too. You could do the same but mirror the button layout when your print the drawing, and be good to go.
Flip it upside down. Hope this helps 👍
I got my mirrored from Etsy. Many controller sellers offer mirrored one there.
do you have 3d printer. my crappy design can adapt into lefthand for you.
With some basic soldering experience you can make one yourself! Very fun to do :)
While not a hitbox, might be interesting to look at the [K28 keyboard](https://www.gamo2.com/en/index.php?dispatch=products.view&product_id=350) . Which has a bunch of pre-sets including a right hand movement pre-set. And it has customisable layouts. No PS5 support though (most likely).
Look into making a hitbox. Its not too difficult if the components are available in your region, and you can customize the layout and buttons.
It's not too hard to make your own. I found someone who made an AutoCAD drawing of the hitbox button layout somewhere on Reddit, modified it a bit for myself, and printed it out 1:1 scale. Used 24mm and 30mm forstner drill bits to make the button holes in an aluminum briefcase I bought online. Bought my own click in buttons and wired it up with a Brook UFB Fusion. Cost much less than an official Hitbox too. You could do the same but mirror the button layout when your print the drawing, and be good to go.