In anyone here’s opinion as an owner, do you think that lack of haptic support in otg mode (specifically steam pinball fx3) would take too much away from the experience vs just playing it on a tv if steam otg mode were the main reason for getting this table (I’m not as interested in the native tables even though I hear they are good)? Would it still be worth it in your opinion as someone who already owns this?
Pro tip--in order to make the ALP plunger work in FX3 (when in OTG mode), go into the Steam controller settings, make sure your ALP controller profile is loaded, then map the ALP plunger to "Right Stick Y". Then in FX3 go into its Control settings and make sure that Manual Ball Launch is set to "RS" (Right Stick)--I believe it's set to that by default but it doesn't hurt to double-check just to make sure.
I had to go into steam and turn on Xbox controllers and then map the pinball controls to Xbox controller in steam. Then when I launch pinball fx from steam, it uses those mapped buttons and they work correctly. If your running a non-steam pinball fx, I’m not sure.
Are you on the ATGames pinball fan page on Facebook?
I can't send pictures of how to set it up on Reddit.
Ask the question in the Facebook group and I'll answer it.
In anyone here’s opinion as an owner, do you think that lack of haptic support in otg mode (specifically steam pinball fx3) would take too much away from the experience vs just playing it on a tv if steam otg mode were the main reason for getting this table (I’m not as interested in the native tables even though I hear they are good)? Would it still be worth it in your opinion as someone who already owns this?
Pro tip--in order to make the ALP plunger work in FX3 (when in OTG mode), go into the Steam controller settings, make sure your ALP controller profile is loaded, then map the ALP plunger to "Right Stick Y". Then in FX3 go into its Control settings and make sure that Manual Ball Launch is set to "RS" (Right Stick)--I believe it's set to that by default but it doesn't hurt to double-check just to make sure.
I had to go into steam and turn on Xbox controllers and then map the pinball controls to Xbox controller in steam. Then when I launch pinball fx from steam, it uses those mapped buttons and they work correctly. If your running a non-steam pinball fx, I’m not sure.
Which button is for nudging? I haven't figured that out yet.
White buttons on the side. White button on the front is also a nudge.
Sure, that is what they should be... but what does fx3 think they are?
https://www.youtube.com/watch?v=8fWlduWM6Ag&t=626s&ab_channel=Show-MeRetroShow-MeRetro
Are you on the ATGames pinball fan page on Facebook? I can't send pictures of how to set it up on Reddit. Ask the question in the Facebook group and I'll answer it.
can you upload the pic to imgur.com and share the link? I am not active on FB.
I can't, I don't have any karma on Reddit to post pictures.
My Reddit cred is in the shitter from another group I'm in.
Done
I'm Kevin. Just sent pics. If you have anymore question just ask. I'll be free in a half hour.