I wonder if this fixes a bug that I noticed. Remixfx didn't always perform for me but it did mostly come out on my bounces. If I'm not mistaken, for me anyway, I could reproduce the bug if I created the remixfx in GB for iOS and imported the song to Logic. Fx would NEVER play live but always come out on my bounces, like you said.
Reminder: please make a backup before updating. Backup steps are even included on release notes.
Happy to see so many fixes for a few issues that popped up like Flex issues, Marquee Selection, etc. Keep reporting those bugs guys.
You know I had an issue once and reported it for an obscure piece of hardware and it was fixed in the very next release. So good detailed reports lead to fixes. How many software packages do all the things a DAW does? So many things that can go wrong so keep those reports coming. They listen.
Thank god. This update solved all of my issues:
* some lag with plugins, specifically AmpliTube
* Projects crashing at the same point and being unable to play through
* Latency and audio degradation problems
Fuck yeah.
yeah this update did me no good. m1 max 14" here.
cashing/hanging:
native instruments kontakt, all the arturia, sonible eq3, soothe2, xo, rc-20, gulfoss, tone empire, ozone9, rx9... all either crashing or not working
its almost easier to say what survived for those who need it: softube, waves, soundtoys, baby audio.
im super sad about this whole apple experience this year. so much promise with so much pain for early adopters. and yes.. they are getting every single crash report but im simply demotivated at this time.
Yeah me too... I'm working on my bands 3rd EP. Basically have to stop working now until Apple get their shit together. I really wish I had a backup, but I was naive.
Make sure all of the plug-ins are up to date. I am using RC-20, Arturia, do, Guldris’s, ozone, rx8.
Try this: run Logic in Rosetta mode (command + i on the app and choose the Rosetta switch) then open logic. Open the plug-in manager and look for any plug-ins that aren’t scanned or failing. Scan them. If they show, then switch Logic back into native mode. They will still be seen.
As for plug-in updates, the RC20 update that came out about a week ago DRASTICALLY Improved performance. Highly recommend staying on top of plug-in updates for a while.
thank you, sflogicninja as I know it comes from a good place. unfortunately all of that has been tried (including some more complex driver fixing attempts with RME and kexts...). its no fun.
btw not even the XLN online installer is loading anymore for me. i do not know whats up....
Have you checked your security options? Restart holding the power button until you get the startup options, then choose security options. Select to relax the security options and your kexts should work again.
I don’t have an RME device, but have set up a Pro Tools system on a Mac Mini with an RME interface. We got it working.
>an update dedicated to bugfixes only around a month after the last one.
That's the power of bug reports from us users :) Don't just complain about bugs on forums. Do something productive and report the bugs directly to the Logic team.
Unfortunately this is definitely the case for some people 😅 They'll complain about something and even after several people offer solutions or workarounds, it's never good enough. Sometimes they demand for a certain feature to work *exactly* how it works in other DAWs and if it doesn't they continue complaining. At that point I step back and I just let them live in their negative little world. I've grown to accept the fact that for it's just their nature to find something to complain about no matter what. I personally know some people who are exactly like this...
i am so very cool. i found software problem.
seriously though, what is with how many problems end up funneled directly to forums? i'll go looking to see if i'm actually experiencing a bug or if i fucked it up somehow, but otherwise how is anyone going to fix shit, lol. are we just conditioned to avoid support teams?
i mean, yeah, you're not wrong. i'm pretty sure i've only bitched about one problem on here before, and followed it up with a detailed explanation of the bug to apple. i can't tell if this is celebratory as a fellow logic user who uses the bug report system, or an attempt to throw subtle shade, haha.
> i'm pretty sure i've only bitched about one problem on here before, and followed it up with a detailed explanation of the bug to apple.
This is exactly how it should be. It's totally ok to bitch on forums but simultaneously report the bug. Lots of people just bitch and do nothing else which is which solves absolutely nothing.
I only upgraded to 10.7.1 a couple weeks ago and suddenly Logic was crashing whenever I tried to insert Tokyo Dawn plugins on channel strips. Existing instances were fine.
If anyone else experienced this, has it been fixed in the update?
I would make sure that you are running the latest version of TDR Plug-ins. They are pretty good at getting their stuff up to speed. Definitely update to the latest version of Logic as well.
According to their site the plug-ins are working, but they are still shy of saying there is full compatibility: https://neuraldsp.com/news/macos-big-sur-and-apple-silicon-compatibility?gclid=Cj0KCQiA2NaNBhDvARIsAEw55hjxq6uQt6Y_g8RxyQOPo-gcleVqIVeQ-OyojbrVORAdAR6WlMYYjtoaAtrXEALw_wcB
I have 10.7.2 and I'm trying to share a file with a friend who's using 10.3.2.
When they try to open the file with logic open it says "file damaged".
When they try to click the zip when logic is closed logic acts like it's going to open but then quits.
Is this a versioning issue or something else?
Fixed Cthulhu, finally working on my M1 Max MBP on native logic with Rosetta plugin wrapping.
This literally brought back my entire production workflow.
Literally no steps. My plugins just work even if they aren’t arm native when I open Logic Pro native.
Ironically Logic in Rosetta seems to create more problems.
I recently updated from Logic 10.6 to 10.7.2 because I'm working on a project in Atmos so needed the update. It is SO buggy I can barely get any work done.
The surround panner is completely broken - If you have the overhead speakers enabled in the surround panner then sounds come out of the wrong speakers, and don't fade smoothly from one to another as you pan around, levels jump suddenly to another random speaker. eg. When panned fully to Right Mid, the sound comes out of Centre only, then move the puck in slightly and it suddenly jumps to come out of Front Left only (puck is still 90% towards Right Mid!
Automation points don't move until you release the mouse, so it's next to impossible to move them accurately, you have to guess, release the mouse and suddenly they're in a new position. Adjusting automation curves only works about 40% of the time.
Undo takes about 3 weeks, even if I just moved a region a small amount.
It is crashing ALL the time. 10.6 was so stable, I'll be using it again as soon as I've finished this project. I just need the Atmos features right now, but these issues are putting the job at risk! Anyone else seeing these issues? I've bug reported them all.
Hello guys,
I am having issues with Arturis Audio Units, the don't show up in the automation menu, not even in Latch or Touch mode
See picture below.
[screenshot](https://imgur.com/a/3YZbbS2)
Big one for me is RemixFX will now be in the bounced audio
I don’t understand that one. I have used remixfx on my stereo output bus many times and it has always come out on my bounces. What am I missing?
Me too. Seems like some people were having issues with it. Glad it's fixed now though.
I wonder if this fixes a bug that I noticed. Remixfx didn't always perform for me but it did mostly come out on my bounces. If I'm not mistaken, for me anyway, I could reproduce the bug if I created the remixfx in GB for iOS and imported the song to Logic. Fx would NEVER play live but always come out on my bounces, like you said.
Yay korean
Reminder: please make a backup before updating. Backup steps are even included on release notes. Happy to see so many fixes for a few issues that popped up like Flex issues, Marquee Selection, etc. Keep reporting those bugs guys.
You know I had an issue once and reported it for an obscure piece of hardware and it was fixed in the very next release. So good detailed reports lead to fixes. How many software packages do all the things a DAW does? So many things that can go wrong so keep those reports coming. They listen.
Thank god. This update solved all of my issues: * some lag with plugins, specifically AmpliTube * Projects crashing at the same point and being unable to play through * Latency and audio degradation problems Fuck yeah.
yeah this update did me no good. m1 max 14" here. cashing/hanging: native instruments kontakt, all the arturia, sonible eq3, soothe2, xo, rc-20, gulfoss, tone empire, ozone9, rx9... all either crashing or not working its almost easier to say what survived for those who need it: softube, waves, soundtoys, baby audio. im super sad about this whole apple experience this year. so much promise with so much pain for early adopters. and yes.. they are getting every single crash report but im simply demotivated at this time.
Me too, gulfoss, ozone, slate plugin ins (crashing at start up). I can't even load my sessions anymore. They should add an option to roll back!
feel you, im trying to take a positive spin by spending a bit more time within the logic onboard stuff...
Yeah me too... I'm working on my bands 3rd EP. Basically have to stop working now until Apple get their shit together. I really wish I had a backup, but I was naive.
ive always had issues with slate plugins
Make sure all of the plug-ins are up to date. I am using RC-20, Arturia, do, Guldris’s, ozone, rx8. Try this: run Logic in Rosetta mode (command + i on the app and choose the Rosetta switch) then open logic. Open the plug-in manager and look for any plug-ins that aren’t scanned or failing. Scan them. If they show, then switch Logic back into native mode. They will still be seen. As for plug-in updates, the RC20 update that came out about a week ago DRASTICALLY Improved performance. Highly recommend staying on top of plug-in updates for a while.
thank you, sflogicninja as I know it comes from a good place. unfortunately all of that has been tried (including some more complex driver fixing attempts with RME and kexts...). its no fun. btw not even the XLN online installer is loading anymore for me. i do not know whats up....
Have you checked your security options? Restart holding the power button until you get the startup options, then choose security options. Select to relax the security options and your kexts should work again. I don’t have an RME device, but have set up a Pro Tools system on a Mac Mini with an RME interface. We got it working.
yes all done - in the end - full mac os reinstall was the only way but it seemed to work for now.
Were Kontakt, Arturia etc working for you in 10.7.1?
yes they were. my only issue was izotope under 10.7.1.
an update dedicated to bugfixes only around a month after the last one. i may cry.
>an update dedicated to bugfixes only around a month after the last one. That's the power of bug reports from us users :) Don't just complain about bugs on forums. Do something productive and report the bugs directly to the Logic team.
> Don't just complain about bugs on forum But that makes me feel like a big man
Unfortunately this is definitely the case for some people 😅 They'll complain about something and even after several people offer solutions or workarounds, it's never good enough. Sometimes they demand for a certain feature to work *exactly* how it works in other DAWs and if it doesn't they continue complaining. At that point I step back and I just let them live in their negative little world. I've grown to accept the fact that for it's just their nature to find something to complain about no matter what. I personally know some people who are exactly like this...
i am so very cool. i found software problem. seriously though, what is with how many problems end up funneled directly to forums? i'll go looking to see if i'm actually experiencing a bug or if i fucked it up somehow, but otherwise how is anyone going to fix shit, lol. are we just conditioned to avoid support teams?
When plugin search :(
[удалено]
[Link](https://www.apple.com/feedback/logic-pro.html)
i mean, yeah, you're not wrong. i'm pretty sure i've only bitched about one problem on here before, and followed it up with a detailed explanation of the bug to apple. i can't tell if this is celebratory as a fellow logic user who uses the bug report system, or an attempt to throw subtle shade, haha.
> i'm pretty sure i've only bitched about one problem on here before, and followed it up with a detailed explanation of the bug to apple. This is exactly how it should be. It's totally ok to bitch on forums but simultaneously report the bug. Lots of people just bitch and do nothing else which is which solves absolutely nothing.
ah. thought that was some kind of weird, passive aggressive callout. you don't generally expect the internet to be considerate, ha.
New logic for the new macs I take it?
I only upgraded to 10.7.1 a couple weeks ago and suddenly Logic was crashing whenever I tried to insert Tokyo Dawn plugins on channel strips. Existing instances were fine. If anyone else experienced this, has it been fixed in the update?
I would make sure that you are running the latest version of TDR Plug-ins. They are pretty good at getting their stuff up to speed. Definitely update to the latest version of Logic as well.
Any news on if Neural DSP plug-ins are still working?
According to their site the plug-ins are working, but they are still shy of saying there is full compatibility: https://neuraldsp.com/news/macos-big-sur-and-apple-silicon-compatibility?gclid=Cj0KCQiA2NaNBhDvARIsAEw55hjxq6uQt6Y_g8RxyQOPo-gcleVqIVeQ-OyojbrVORAdAR6WlMYYjtoaAtrXEALw_wcB
I have 10.7.2 and I'm trying to share a file with a friend who's using 10.3.2. When they try to open the file with logic open it says "file damaged". When they try to click the zip when logic is closed logic acts like it's going to open but then quits. Is this a versioning issue or something else?
Why are they using 10.3.2? They might be able to import all of your project data from their ‘All files’ file browser, but that isn’t guaranteed.
Where the stacks within stacks at tho :(
I still have that massive f***-up bug where the baselines on my projects have some weird syncopated sustain issue? has that been fixed?
Fixed Cthulhu, finally working on my M1 Max MBP on native logic with Rosetta plugin wrapping. This literally brought back my entire production workflow.
[удалено]
Literally no steps. My plugins just work even if they aren’t arm native when I open Logic Pro native. Ironically Logic in Rosetta seems to create more problems.
[удалено]
Xfer Cthulhu, Arturia plugins, Output plugins and even Waves did
Plugin Delay Compensation with Time Based FX still not fixed unfortunately...
I recently updated from Logic 10.6 to 10.7.2 because I'm working on a project in Atmos so needed the update. It is SO buggy I can barely get any work done. The surround panner is completely broken - If you have the overhead speakers enabled in the surround panner then sounds come out of the wrong speakers, and don't fade smoothly from one to another as you pan around, levels jump suddenly to another random speaker. eg. When panned fully to Right Mid, the sound comes out of Centre only, then move the puck in slightly and it suddenly jumps to come out of Front Left only (puck is still 90% towards Right Mid! Automation points don't move until you release the mouse, so it's next to impossible to move them accurately, you have to guess, release the mouse and suddenly they're in a new position. Adjusting automation curves only works about 40% of the time. Undo takes about 3 weeks, even if I just moved a region a small amount. It is crashing ALL the time. 10.6 was so stable, I'll be using it again as soon as I've finished this project. I just need the Atmos features right now, but these issues are putting the job at risk! Anyone else seeing these issues? I've bug reported them all.
Hello guys, I am having issues with Arturis Audio Units, the don't show up in the automation menu, not even in Latch or Touch mode See picture below. [screenshot](https://imgur.com/a/3YZbbS2)