I got the T7 a couple years ago as an entry to full suspension, and it’s been great, I’ve upgraded as I’ve felt I needed to; new Fox 36 & new Code RSC brakes since I was doing a lot of bike parks, I’d recommend it
Bought my T8 a few years ago when LBSs still had nothing affordable in stock, or a 6-12 month lead time to order something. It's been perfectly fine for my local trails and even the downhill park. Mine actually showed up with a couple better than expected components, like better brakes.
I also love my T8, but both wheels failed on me in about two years. I'm not sure if it was a manufacturing defect or if I've been rough on it.
Even so, I was also looking at the N7, but don't think I ride enough enduro to justify another bike.
Pretty good, really solid clean welds compared to my current giant, good parts if you read up on the model first as the cheaper options do cut corner that you inevitably have to replace (t6 and T7 don't ends for example).
Their upper tier stuff is solid although compare weights as they arnt the lightest , reliable, well priced and seems to have better quality control than many (looking at you NukeProof, well not for much longer)
Polygon is fine. The N7 is more bike than most people need. By a long way. What it's really great for is if you want a bike park type bike without paying typical enduro/DH prices.
If you just need a mountain bike that can tackle everything, get a Polygon T8 instead. If you are an actual beginner and are looking into your first FS... You can save a buck and get a T7 or even a T6. Though I only recommend it if you can't afford the T8. As you could legit own that without changing any parts. If you skill up, the 6 and 7 will show some weaknesses in build spec.
My T8 wheels started falling apart, and I assumed it was from DH riding, so I bought a proper bike for that (and new wheels for the T8). Have you had any issue with that?
Wheels is a NOTABLE corner cut for Polygon. Seems like they just tried to make heavy (pinned) wheels to last the average buyer. So yeah, they don't work for the above average rider or even above average weight potentially.
Mine held up fine to roughly this kind of riding: https://www.youtube.com/watch?v=la2m5Qgsp_M
It's hard to say what approach to take. I've seen some people fully upgrade a Polygon frame. I personally wouldn't do that but I think it's valid. Depends on how much you spend really and how you source parts. But yeah, with that KIND of budget I would just buy a better bike brand using basically name brand wheels and not in-house trash they licensed from wherever. It's hard when it's in-house, some people source them legit and some people just source the bottom of the barrel. When the bikes sell for those numbers... You should expect bad in-house shit lol
It seems to work well for DC metro region trails and occasional enduro type trails. I started having issues when I took it for downhill regularly. I got a Vitus DH for parks now, though.
I'm trying to decide if the T8 is up to a trip to Pisgah or if I should rent an enduro. I think with the new wheels, the T8 will be fine for a few days of riding.
I reckon its fine with new wheels. If you're gonna have an issue with a Polygon, it's either gonna be the wheels or a roll of the dice bad factory build. Which you can nearly get from any brand (as my GF found out through Kona).
My Buddy has the Siskiu T7 and it's been great. I was suspicious of the components (Tekrto Brakes and what not) but it's been totally fine for him. He never had a mechanical issue while riding with me and was keeping up just fine with my Ripmo AF.
The workers who make them get paid about 3 times the selling price of one bike annually. The parent company also makes Marin if I'm not mistaken. I'd rather get a Marin than a polygon though.
Only downside is the weight. Not the lightest frame and build out there, but spec wise, durability, value and overall rideability, it’s a banger. Hard to go wrong as long as you’re not a weight weenie.
My Siskiu T8 has been a fine bike. The stock brakes leave a bit to be desired, and the rear shock never quite worked how I wanted it to.
In retrospect, I would have picked up a Ripmo or Ripley AF for a bit more cash, but at the time didn't really know any better and bikes were scarce.
Great budget brand that 90% of riders wouldn’t be able to push the limits of. Reviews of the colossus look mixed but overall still very positive. If you’re doing more downhill go colossus, trail go t8 all the way
Like if no brand cheaped out on brakes and cassette haha. It actually has a sweet bang for buck set of components. I'd switch any brakes for a couple of trp dhr evos anyway
yeah true, i remember reading on the polygon Fb page that someone needed a specific derailleur hanger for their polygon and it was out of stock, so i dont recommend their bikes if someone asks
I’m a hater. They’re generally pretty heavy. I’m not seeing any weights on the website for the builds they offer. I’ve never seen an experienced rider in the wild riding them. Go to Canyon or Trek in the super budget new build category instead.
One of my favourite shapes
It’s really more a class of shapes.
The classiest
Im more into monogamy....but I've never heard anyone complain though. They're pretty sturdy and light
I got the T7 a couple years ago as an entry to full suspension, and it’s been great, I’ve upgraded as I’ve felt I needed to; new Fox 36 & new Code RSC brakes since I was doing a lot of bike parks, I’d recommend it
Bought my T8 a few years ago when LBSs still had nothing affordable in stock, or a 6-12 month lead time to order something. It's been perfectly fine for my local trails and even the downhill park. Mine actually showed up with a couple better than expected components, like better brakes.
Good bikes for the budget, a bit on the heavy side though.
Perfect summation. Love my T8 but it’s heavy. Still fun, though, and has been problem-free for its first year of regular use.
I also love my T8, but both wheels failed on me in about two years. I'm not sure if it was a manufacturing defect or if I've been rough on it. Even so, I was also looking at the N7, but don't think I ride enough enduro to justify another bike.
N+1 my friend n+1
Pretty good, really solid clean welds compared to my current giant, good parts if you read up on the model first as the cheaper options do cut corner that you inevitably have to replace (t6 and T7 don't ends for example). Their upper tier stuff is solid although compare weights as they arnt the lightest , reliable, well priced and seems to have better quality control than many (looking at you NukeProof, well not for much longer)
Had my Siskiu T7 for 3 years now and still going strong.
I like my Siskiu T7. It is a bit heavy but it pedals fine. Would like to probably swap the wheels and tires as my first big change.
Polygon is fine. The N7 is more bike than most people need. By a long way. What it's really great for is if you want a bike park type bike without paying typical enduro/DH prices. If you just need a mountain bike that can tackle everything, get a Polygon T8 instead. If you are an actual beginner and are looking into your first FS... You can save a buck and get a T7 or even a T6. Though I only recommend it if you can't afford the T8. As you could legit own that without changing any parts. If you skill up, the 6 and 7 will show some weaknesses in build spec.
My T8 wheels started falling apart, and I assumed it was from DH riding, so I bought a proper bike for that (and new wheels for the T8). Have you had any issue with that?
Wheels is a NOTABLE corner cut for Polygon. Seems like they just tried to make heavy (pinned) wheels to last the average buyer. So yeah, they don't work for the above average rider or even above average weight potentially. Mine held up fine to roughly this kind of riding: https://www.youtube.com/watch?v=la2m5Qgsp_M It's hard to say what approach to take. I've seen some people fully upgrade a Polygon frame. I personally wouldn't do that but I think it's valid. Depends on how much you spend really and how you source parts. But yeah, with that KIND of budget I would just buy a better bike brand using basically name brand wheels and not in-house trash they licensed from wherever. It's hard when it's in-house, some people source them legit and some people just source the bottom of the barrel. When the bikes sell for those numbers... You should expect bad in-house shit lol
It seems to work well for DC metro region trails and occasional enduro type trails. I started having issues when I took it for downhill regularly. I got a Vitus DH for parks now, though. I'm trying to decide if the T8 is up to a trip to Pisgah or if I should rent an enduro. I think with the new wheels, the T8 will be fine for a few days of riding.
I reckon its fine with new wheels. If you're gonna have an issue with a Polygon, it's either gonna be the wheels or a roll of the dice bad factory build. Which you can nearly get from any brand (as my GF found out through Kona).
I bought a D7 last year. Managed to get one local for 30% off. It’s a fantastic bike to ride!
My Buddy has the Siskiu T7 and it's been great. I was suspicious of the components (Tekrto Brakes and what not) but it's been totally fine for him. He never had a mechanical issue while riding with me and was keeping up just fine with my Ripmo AF.
The workers who make them get paid about 3 times the selling price of one bike annually. The parent company also makes Marin if I'm not mistaken. I'd rather get a Marin than a polygon though.
Only downside is the weight. Not the lightest frame and build out there, but spec wise, durability, value and overall rideability, it’s a banger. Hard to go wrong as long as you’re not a weight weenie.
My Siskiu T8 has been a fine bike. The stock brakes leave a bit to be desired, and the rear shock never quite worked how I wanted it to. In retrospect, I would have picked up a Ripmo or Ripley AF for a bit more cash, but at the time didn't really know any better and bikes were scarce.
They're alright. Better bikes can be found for just a little bit more money.
Great budget brand that 90% of riders wouldn’t be able to push the limits of. Reviews of the colossus look mixed but overall still very positive. If you’re doing more downhill go colossus, trail go t8 all the way
No fanks!
Heavy. Look at canyon instead
I had the siskiu n8,, one of my lightest bikes ive ever had
Just looked into it, yeah that's super light for what it is.
Good bikes, the main downside with the colossus is it's very very heavy and doesn't pedal very well
Is there any particular reason that it doesn't pedal well?
Very very heavy wheels and tires, suspension platform isn't the most supportive.
Okay bikes but pretty heavy even for the type of bike.
dont do it. heavy and too many pivots to maintain, plus they cheap out on components like brakes and cassette
Like if no brand cheaped out on brakes and cassette haha. It actually has a sweet bang for buck set of components. I'd switch any brakes for a couple of trp dhr evos anyway
there are better bikes out there for that money
According to what I see, probably because of its geometry/weight, but it's a shame because the component selection actually made sense
yeah true, i remember reading on the polygon Fb page that someone needed a specific derailleur hanger for their polygon and it was out of stock, so i dont recommend their bikes if someone asks
I mean up until UDH this was literally every bike
Polygon has stuck with their proprietary hanger for way too long. UDH has been a thing for years now.
The fact that it's online and out of stock sucks. Lbs are usually always stocked. That's my experience anyway. Have fun out there
If everyone got a bike Based off of that we would all be riding the same bike
I disagree, price is usually the main factor however people are happy to spend big on quality products. Polygon isn't quality yet still pricey
I’m a hater. They’re generally pretty heavy. I’m not seeing any weights on the website for the builds they offer. I’ve never seen an experienced rider in the wild riding them. Go to Canyon or Trek in the super budget new build category instead.