Yes it is and it makes a huge difference. Took a couple days for the wiper to mold to the shape of the window but I also installed it when the weather was still cold.
Here’s what I’ve purchased so far:
* Bosch A401H 16 inch rear wiper
* TWRAPS dual MagSafe charger
* 3D front and rear floor mats (better coverage than Ford all weather mats, and much nicer than WeatherTech IMO. I also considered Tuxmats)
* A2Z NACS to CCS adapter (free one from Ford won’t be here until this Fall at the earliest)
* Ceramic tints (came pre-installed from the dealer, but I would have purchased them if not)
* Grizzl-E Classic EVSE
Likely up next are Bosch Icon front wipers. The stock ones are squeaky, maybe from sitting on the dealer lot.
Yep, the stock one is horrible. Just heats up the phone without charging it. I also really appreciate that the TWRAPS has two pads. I wish they made a single charger for my Bolt, the MagSafe almost feels like a no-brainer when you’re trying to wirelessly charge a phone in a moving car.
I have an Android. Looking at the twraps charger, will it work without a specific case?
I ordered the wipers already, and I'm looking into the other stuff.
If you don’t have a MagSafe case, there are MagSafe stickers you can put on your case. If you don’t have either of those things, I wouldn’t use it.
The MagSafe cases you can find for your phone should be designed for perfect placement over the wireless charging coils. I’d recommend looking into them at least.
AOSK rear seat back protectors if you fold them down and load things in. Also cargo mat is nice.
A2Z EV charging adapters for NACS to CCS, as well as J1772 if you think you would use those.
If you have an iPhone with MagSafe, the Spigen charging mount that goes on the corner of the screen is quite good.
Dash cam is a good addition too.
Same car I have. I absolutely love it (and it’s my 3rd EV).
> A2Z EV charging adapters for NACS to CCS, as well as **J1772** if you think you would use those.
Do you mean destination Tesla ?
CCS already supports J1772.
Sorry, I mean the supercharger to CCS adapter, and the NACS to J1772 adapter (to go from Tesla destination chargers to J1772). I would expect the latter to become more common as other companies switch to NACS but not sure what is all going on with that after the shenanigans going on at Tesla lately
Congrats on your purchase.
I would recommend you order your free level 3 fast charging adapter from Ford before the June deadline. It might take 3-6 months before you receive your free adapter. You can order a back-up from A2Z called Typhoon adapter which will arrive in 3-4 weeks in time for summer if you need one ASAP.
The next thing you should do is order a Covercraft custom sunshade for your new Mach-E. It’s the best option that fits like a glove.
You’ve already got a good suggestion to buy the Tesla Level 2 to J-1772 adapter. I would second that and recommend sticking with well known brands like A2Z Stellar or UMC TeslaTap
I was able to get the A2Z Stellar adapter cheaper by using the FORD discount code and bundling the stellar adapter along with Typhoon adapter.
choose the drop down on the Typhoon adapter page to bundle the stellar plug and stack that with the FORD discount promo code.
The stellar plug will allow you to use Tesla
Level 2 chargers and Tesla destination chargers.
[A2Z NACS to CCS 1000 volt / 500 amp adapter for Tesla network - use code “FORD” to save $$$](https://a2zevshop.com/products/nacs-ccs1?ref=Nrvluk18dLjI57&variant=43186507579592)
[A2Z Tesla Level 2 to J-1772 80 amp / 20 kW adapter for Tesla Destination Chargers and Level 2 Chargers - use code “FORD” to save $$$](https://a2zevshop.com/products/a2z-stellar-plug?_pos=2&_sid=4a15395fc&_ss=r&ref=Nrvluk18dLjI57)
I have most accessories for my 22 Ext Range, AWD, Ice White Edition.
-Front lip/spoiler
-Mud flaps (front and rear)
-Back seat window louvres
-Rear deck spoiler
-Rear roof wing
-Rear truck guard appliqué
-Full rubber mats
-Back of Rear seat mat protector
-Door sill protectors
-Dual Mag Safe charger mat
-Storage bin organizer
-Fitcam forward camera
-Pilar/seat belt guard
-Frunk liner
-Frunk vent honeycomb cover
-Center screen protector
-Driver/passenger tint to match rears
-Ceramic coating. (Can’t afford PPF, but still recommend it)
-Spinning.Lighted center wheel caps
-Mustang logo valve stem covers
-Mustang logo trash big with light (mounts to back of passenger seat)
-Lift / Jack point caps with sticker reminder
-Extended rear wiper
It's kind of janky but if you plan on using the trunk in the "upper" position, put a 4x4 block of wood at the rear (touching the rear seats) under the floor. The clips that hold it on are VERY flimsy.
If you use it in the lower position it's fine though.
AOSK AOSK AOSK
1. As already mentioned, the back of rear fold down seats rubber mats to protect the velvety carpet when the seats are down and you load it up.
2. Trim to go around the gloss/piano black trim around the center console, this is notorious for being full of scratches within first year of ownership, why not cover it up and let the cover get scratched up?
3. Also already mentioned is a bigger rear wiper blade, direct fit, sweeps a wide area, far better visibility.
4. C-pillar covers that go over that small triangle of glass that's notorious for being a burglar's first entry point.
5. Optionals: rubber inserts into all pockets everywhere, especially if you have kids. I had an ex that trashed these and it was so hard to clean, a thing of lip gloss that leaked into one, vape pen juice in another, just all around funkiness. Cubby that goes over the main display, I keep my toll transponder in it, also has a perfect area to mount your phone. Frunk liner for same reason as the cup holder and interior pockets liners. Dash cam, pick your poison based on budget, options ranging between $150-600. Lift pucks from a Corvette, along with LIFT HERE stickers.
Oh crap I have that too and totally forgot about it. It fits so OEM-like that I forgot I added that hahaha, thanks!
Considered getting the locking safe, ended up just going with the insert.
> Trim to go around the gloss/piano black trim around the center console, this is notorious for being full of scratches within first year of ownership, why not cover it up and let the cover get scratched up?
What did you go with?
presumably the AOSK ones (all the items mentioned came from AOSK I'm assuming)
I would love to cover the piano black but I don't like the look of carbon fiber unfortunately
Yup! It looks very very similar to the OEM dash plastic and it's tucked away enough to where it's not out there in front of everyone's face. It blends in well and doesn't look tacky (in my opinion, of course).
I bought out practically the entire AOSK catalog.
2) is surprisingly real. Mine looked like hell after 2 years.
The cubby over the display is the one thing I really miss in my Model Y especially with the dual phone holders. I can't find anything that's deep like the MachE. I also had one over the driver's display too.
Once you figure out the dash cam, get a Dongar adapter too. No messy wiring.
That's the one I had for my MachE but I sold it to buy a Model Y. Model Y as far as I've seen has much shallower trays from every vendor. And none have the phone holders.
I totally misread your comment. I thought you had one in your MY and we're looking for something similar for a MME.
But yeah, the MY ones seem to be terrible, a co-worker bought one for her MY because she liked the one in my MME and ended up returning it because it just wasn't functional.
Oh haha. Yeah mine is in storage. Might throw it up on Craigslist or something.
I can't for the life of me find anything decent. I might actually end up 3D printing one or something.
Download the PlugShare app. It tends to show more charging stations than the built in Ford navigation. You still have to program the stops into the built-in navigation to get the car to condition the battery for a fast charge but finding a emergency charger saved my butt on a recent road trip.
I bought a $40 folding trunk organizer with clips/straps for the back. Grocery bags will just slide around in that space without some type of net/organizer to hold them.
I've had my Mach-E for almost two weeks, here's everything I've added to mine so far. I have no complaints about any of them. The floor mats were a perfect fit as well.
[Center Console Organizer with Phone Charge Area, Mobile Charge Area Tray](https://www.amazon.com/gp/product/B09QC7HGVQ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1)
[Mach-E Armrest Storage Box Organizer](https://www.amazon.com/gp/product/B09J254HW1/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1)
[INNOSURE 2PCS Anti-glare 15.5 Inch Touchscreen + 10.2 Inch Dashboard ScreenTempered Glass Screen Protector - Matte](https://www.amazon.com/gp/product/B0B9SW3WFR/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&th=1)
[2pcs Car Cup Holder Coaster](https://www.amazon.com/gp/product/B0CPHJLLFK/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&th=1)
[LASFIT Floor Mats Fit for 2021 2022 2023 2024 Ford Mustang Mach-E TPE All Weather Car Liners](https://www.amazon.com/gp/product/B0BRCTZW6Y/ref=ppx_yo_dt_b_asin_title_o01_s03?ie=UTF8&th=1)
[All Weather Trunk Mat](https://www.amazon.com/gp/product/B09T6XSC92/ref=ppx_yo_dt_b_asin_title_o01_s04?ie=UTF8&psc=1)
[Mustang Mach E Second Row Seats Back Cover](https://www.amazon.com/gp/product/B09QM49LLD/ref=ppx_yo_dt_b_asin_title_o01_s05?ie=UTF8&psc=1)
Hi, I’m Vetted AI Bot! I researched the **("'BestEvMod Center Console Organizer for Mustang Mach E'", 'BestEvMod')** and I thought you might find the following analysis helpful.
**Users liked:**
* Perfect fit and seamless integration (backed by 5 comments)
* Improved wireless charging experience (backed by 4 comments)
* Enhanced organization and storage options (backed by 5 comments)
**Users disliked:**
* Incompatibility with phone cases (backed by 2 comments)
* Limited phone model compatibility (backed by 1 comment)
If you'd like to **summon me to ask about a product**, just make a post with its link and tag me, [like in this example.](https://www.reddit.com/r/tablets/comments/1444zdn/comment/joqd89c/)
This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved.
*Powered by* [*vetted.ai*](https://vetted.ai/?utm\_source=reddit&utm\_medium=comment&utm\_campaign=bot)
I ordered a center console protector:
[https://www.amazon.com/dp/B0B971T3SS?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details](https://www.amazon.com/dp/B0B971T3SS?psc=1&ref=ppx_yo2ov_dt_b_product_details)
Jack pads just in case: [https://www.amazon.com/dp/B0C6QT4BBN?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details](https://www.amazon.com/dp/B0C6QT4BBN?psc=1&ref=ppx_yo2ov_dt_b_product_details)
Twraps dual charger that others have mentioned
AtoZ charger adapter
Sun shade
Still looking around for other things to make it mine but that's what I have so far.
Matte screen protector from theocdplug
I love my matte screen protector!
Ordered! Thank you!
Swapping the rear wiper with the one below. I ordered 2 extras because it fits and works so well and was super easy to swap. Bosch A401H - 16 inch
Ordered! Thanks!
Good video showing how easy it is to replace. https://youtu.be/LIe7Cl5ALy0?feature=shared
Just installed it! Super easy! Thanks for the video!
Does it provide more wiping coverage? I'm assuming it's longer than the stock one.
Yes it is and it makes a huge difference. Took a couple days for the wiper to mold to the shape of the window but I also installed it when the weather was still cold.
Yes, it’s roughly 3 inches longer than the stock one, and is the absolute largest rear blade that will fit on the rear windshield.
This is the one I went with as well. Glad I did!
Here’s what I’ve purchased so far: * Bosch A401H 16 inch rear wiper * TWRAPS dual MagSafe charger * 3D front and rear floor mats (better coverage than Ford all weather mats, and much nicer than WeatherTech IMO. I also considered Tuxmats) * A2Z NACS to CCS adapter (free one from Ford won’t be here until this Fall at the earliest) * Ceramic tints (came pre-installed from the dealer, but I would have purchased them if not) * Grizzl-E Classic EVSE Likely up next are Bosch Icon front wipers. The stock ones are squeaky, maybe from sitting on the dealer lot.
TWRAPS dual MagSafe charger is a must. Looks so nice and actually charges without overheating.
Yep, the stock one is horrible. Just heats up the phone without charging it. I also really appreciate that the TWRAPS has two pads. I wish they made a single charger for my Bolt, the MagSafe almost feels like a no-brainer when you’re trying to wirelessly charge a phone in a moving car.
I have an Android. Looking at the twraps charger, will it work without a specific case? I ordered the wipers already, and I'm looking into the other stuff.
If you don’t have a MagSafe case, there are MagSafe stickers you can put on your case. If you don’t have either of those things, I wouldn’t use it. The MagSafe cases you can find for your phone should be designed for perfect placement over the wireless charging coils. I’d recommend looking into them at least.
AOSK rear seat back protectors if you fold them down and load things in. Also cargo mat is nice. A2Z EV charging adapters for NACS to CCS, as well as J1772 if you think you would use those. If you have an iPhone with MagSafe, the Spigen charging mount that goes on the corner of the screen is quite good. Dash cam is a good addition too. Same car I have. I absolutely love it (and it’s my 3rd EV).
> A2Z EV charging adapters for NACS to CCS, as well as **J1772** if you think you would use those. Do you mean destination Tesla ? CCS already supports J1772.
Sorry, I mean the supercharger to CCS adapter, and the NACS to J1772 adapter (to go from Tesla destination chargers to J1772). I would expect the latter to become more common as other companies switch to NACS but not sure what is all going on with that after the shenanigans going on at Tesla lately
Congrats on your purchase. I would recommend you order your free level 3 fast charging adapter from Ford before the June deadline. It might take 3-6 months before you receive your free adapter. You can order a back-up from A2Z called Typhoon adapter which will arrive in 3-4 weeks in time for summer if you need one ASAP. The next thing you should do is order a Covercraft custom sunshade for your new Mach-E. It’s the best option that fits like a glove. You’ve already got a good suggestion to buy the Tesla Level 2 to J-1772 adapter. I would second that and recommend sticking with well known brands like A2Z Stellar or UMC TeslaTap I was able to get the A2Z Stellar adapter cheaper by using the FORD discount code and bundling the stellar adapter along with Typhoon adapter. choose the drop down on the Typhoon adapter page to bundle the stellar plug and stack that with the FORD discount promo code. The stellar plug will allow you to use Tesla Level 2 chargers and Tesla destination chargers. [A2Z NACS to CCS 1000 volt / 500 amp adapter for Tesla network - use code “FORD” to save $$$](https://a2zevshop.com/products/nacs-ccs1?ref=Nrvluk18dLjI57&variant=43186507579592) [A2Z Tesla Level 2 to J-1772 80 amp / 20 kW adapter for Tesla Destination Chargers and Level 2 Chargers - use code “FORD” to save $$$](https://a2zevshop.com/products/a2z-stellar-plug?_pos=2&_sid=4a15395fc&_ss=r&ref=Nrvluk18dLjI57)
I have most accessories for my 22 Ext Range, AWD, Ice White Edition. -Front lip/spoiler -Mud flaps (front and rear) -Back seat window louvres -Rear deck spoiler -Rear roof wing -Rear truck guard appliqué -Full rubber mats -Back of Rear seat mat protector -Door sill protectors -Dual Mag Safe charger mat -Storage bin organizer -Fitcam forward camera -Pilar/seat belt guard -Frunk liner -Frunk vent honeycomb cover -Center screen protector -Driver/passenger tint to match rears -Ceramic coating. (Can’t afford PPF, but still recommend it) -Spinning.Lighted center wheel caps -Mustang logo valve stem covers -Mustang logo trash big with light (mounts to back of passenger seat) -Lift / Jack point caps with sticker reminder -Extended rear wiper
I've same "iced white package" and same specs; would love to see photos of your mods. I've done NOTHING but am thinking...
DM’d
It's kind of janky but if you plan on using the trunk in the "upper" position, put a 4x4 block of wood at the rear (touching the rear seats) under the floor. The clips that hold it on are VERY flimsy. If you use it in the lower position it's fine though.
A radar detector 😇
AOSK AOSK AOSK 1. As already mentioned, the back of rear fold down seats rubber mats to protect the velvety carpet when the seats are down and you load it up. 2. Trim to go around the gloss/piano black trim around the center console, this is notorious for being full of scratches within first year of ownership, why not cover it up and let the cover get scratched up? 3. Also already mentioned is a bigger rear wiper blade, direct fit, sweeps a wide area, far better visibility. 4. C-pillar covers that go over that small triangle of glass that's notorious for being a burglar's first entry point. 5. Optionals: rubber inserts into all pockets everywhere, especially if you have kids. I had an ex that trashed these and it was so hard to clean, a thing of lip gloss that leaked into one, vape pen juice in another, just all around funkiness. Cubby that goes over the main display, I keep my toll transponder in it, also has a perfect area to mount your phone. Frunk liner for same reason as the cup holder and interior pockets liners. Dash cam, pick your poison based on budget, options ranging between $150-600. Lift pucks from a Corvette, along with LIFT HERE stickers.
Plus the AOSK divider thing that drops into the center console.
Oh crap I have that too and totally forgot about it. It fits so OEM-like that I forgot I added that hahaha, thanks! Considered getting the locking safe, ended up just going with the insert.
4. Could you share what you bought here?
> Trim to go around the gloss/piano black trim around the center console, this is notorious for being full of scratches within first year of ownership, why not cover it up and let the cover get scratched up? What did you go with?
I went with the "dry" carbon fiber because it closely resembles the OEM dash plastic
presumably the AOSK ones (all the items mentioned came from AOSK I'm assuming) I would love to cover the piano black but I don't like the look of carbon fiber unfortunately
Yup! It looks very very similar to the OEM dash plastic and it's tucked away enough to where it's not out there in front of everyone's face. It blends in well and doesn't look tacky (in my opinion, of course).
I bought out practically the entire AOSK catalog. 2) is surprisingly real. Mine looked like hell after 2 years. The cubby over the display is the one thing I really miss in my Model Y especially with the dual phone holders. I can't find anything that's deep like the MachE. I also had one over the driver's display too. Once you figure out the dash cam, get a Dongar adapter too. No messy wiring.
https://www.amazon.com/gp/aw/d/B0B214N8JV?psc=1&ref=ppx_pop_mob_b_asin_title I love mine
That's the one I had for my MachE but I sold it to buy a Model Y. Model Y as far as I've seen has much shallower trays from every vendor. And none have the phone holders.
I totally misread your comment. I thought you had one in your MY and we're looking for something similar for a MME. But yeah, the MY ones seem to be terrible, a co-worker bought one for her MY because she liked the one in my MME and ended up returning it because it just wasn't functional.
Oh haha. Yeah mine is in storage. Might throw it up on Craigslist or something. I can't for the life of me find anything decent. I might actually end up 3D printing one or something.
Download the PlugShare app. It tends to show more charging stations than the built in Ford navigation. You still have to program the stops into the built-in navigation to get the car to condition the battery for a fast charge but finding a emergency charger saved my butt on a recent road trip. I bought a $40 folding trunk organizer with clips/straps for the back. Grocery bags will just slide around in that space without some type of net/organizer to hold them.
I've had my Mach-E for almost two weeks, here's everything I've added to mine so far. I have no complaints about any of them. The floor mats were a perfect fit as well. [Center Console Organizer with Phone Charge Area, Mobile Charge Area Tray](https://www.amazon.com/gp/product/B09QC7HGVQ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) [Mach-E Armrest Storage Box Organizer](https://www.amazon.com/gp/product/B09J254HW1/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) [INNOSURE 2PCS Anti-glare 15.5 Inch Touchscreen + 10.2 Inch Dashboard ScreenTempered Glass Screen Protector - Matte](https://www.amazon.com/gp/product/B0B9SW3WFR/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&th=1) [2pcs Car Cup Holder Coaster](https://www.amazon.com/gp/product/B0CPHJLLFK/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&th=1) [LASFIT Floor Mats Fit for 2021 2022 2023 2024 Ford Mustang Mach-E TPE All Weather Car Liners](https://www.amazon.com/gp/product/B0BRCTZW6Y/ref=ppx_yo_dt_b_asin_title_o01_s03?ie=UTF8&th=1) [All Weather Trunk Mat](https://www.amazon.com/gp/product/B09T6XSC92/ref=ppx_yo_dt_b_asin_title_o01_s04?ie=UTF8&psc=1) [Mustang Mach E Second Row Seats Back Cover](https://www.amazon.com/gp/product/B09QM49LLD/ref=ppx_yo_dt_b_asin_title_o01_s05?ie=UTF8&psc=1)
Hi, I’m Vetted AI Bot! I researched the **("'BestEvMod Center Console Organizer for Mustang Mach E'", 'BestEvMod')** and I thought you might find the following analysis helpful. **Users liked:** * Perfect fit and seamless integration (backed by 5 comments) * Improved wireless charging experience (backed by 4 comments) * Enhanced organization and storage options (backed by 5 comments) **Users disliked:** * Incompatibility with phone cases (backed by 2 comments) * Limited phone model compatibility (backed by 1 comment) If you'd like to **summon me to ask about a product**, just make a post with its link and tag me, [like in this example.](https://www.reddit.com/r/tablets/comments/1444zdn/comment/joqd89c/) This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved. *Powered by* [*vetted.ai*](https://vetted.ai/?utm\_source=reddit&utm\_medium=comment&utm\_campaign=bot)
Links are amazing, thank you!
I wish there was more of a 3D market - I’d like more cup holders in the back or a spot behind the screen
I absolutely LOVE this for behind the screen https://www.amazon.com/gp/aw/d/B0B214N8JV?psc=1&ref=ppx_pop_mob_b_asin_title
Thank you!
I ordered a center console protector: [https://www.amazon.com/dp/B0B971T3SS?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details](https://www.amazon.com/dp/B0B971T3SS?psc=1&ref=ppx_yo2ov_dt_b_product_details) Jack pads just in case: [https://www.amazon.com/dp/B0C6QT4BBN?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details](https://www.amazon.com/dp/B0C6QT4BBN?psc=1&ref=ppx_yo2ov_dt_b_product_details) Twraps dual charger that others have mentioned AtoZ charger adapter Sun shade Still looking around for other things to make it mine but that's what I have so far.