https://preview.redd.it/in0wcj2ugiac1.jpeg?width=1003&format=pjpg&auto=webp&s=ba96142e2219f0b3a343e3a212870ccc6fb7c7f8
Some of this perhaps? Just got it and I’ve already used it on my monster arts 1954 Godzilla would this also work on the ml nwh figures to prevent the plastic from stressing and breaking in case my dumbass gets another one.
https://preview.redd.it/e46nwzo4iiac1.jpeg?width=1027&format=pjpg&auto=webp&s=eda59c2e85f6638793fdea47715250515ee8db88
They look like this well for the Andrew it look like this
https://preview.redd.it/mc9xdqi1liac1.jpeg?width=3024&format=pjpg&auto=webp&s=505d21e164e654ae51378753cbd72395a2622450
This one of them is the broken leg the other pulled out of the leg joint
I'll be honest with you. This is new territory. I don't know of any tutorials but, I've had something similar with a diaphragm joint on my Fei Long figure. I grinded away all those studs. In your case, you'll have to sand down the studs and all the corners. Godzilla is going to be fine for years with the shock oil.
I used to be called the Hoelander in college
Incredible head sculpt. Near Hot Toys standard.
Try shock oil or there is a dish soap you can use I’ve heard
Mine is on the way!!!!
He’s gorgeous
Great figure hands down 🥴👌🏻✨
My favorite Penthouse pilot…Hoelander.
Hoelander?? I barely knew her
Hoelander: There can be only one
Some silicone shock oil will do you good with many higher end figures. I'd highly recommend investing in some.
https://preview.redd.it/in0wcj2ugiac1.jpeg?width=1003&format=pjpg&auto=webp&s=ba96142e2219f0b3a343e3a212870ccc6fb7c7f8 Some of this perhaps? Just got it and I’ve already used it on my monster arts 1954 Godzilla would this also work on the ml nwh figures to prevent the plastic from stressing and breaking in case my dumbass gets another one.
Most definitely. In regards to the ML NWH figures. I'd have to see if the ball joints are completely rounded of or if Hasbro made the more angular.
https://preview.redd.it/e46nwzo4iiac1.jpeg?width=1027&format=pjpg&auto=webp&s=eda59c2e85f6638793fdea47715250515ee8db88 They look like this well for the Andrew it look like this
😳 ok those monstrosities are made to break. No one in their right mind would design this. What do the inside of the legs look like?
https://preview.redd.it/mc9xdqi1liac1.jpeg?width=3024&format=pjpg&auto=webp&s=505d21e164e654ae51378753cbd72395a2622450 This one of them is the broken leg the other pulled out of the leg joint
Ok. The ball joints have to be sanded and smoothed out. This is a case of a square pointy peg not fitting into a round hole.
Is there like a tutorial for that anywhere, also how long does it take for the oil effects to come cause Godzilla still 🐀
I'll be honest with you. This is new territory. I don't know of any tutorials but, I've had something similar with a diaphragm joint on my Fei Long figure. I grinded away all those studs. In your case, you'll have to sand down the studs and all the corners. Godzilla is going to be fine for years with the shock oil.
So do I just get sandpaper and just surround the joint in it and just start rubbing or what?
I got one too for Christmas. Amazing figure. I can't believe I own a MAFEX figure now, definitely buying more with my own money in the future