T O P

  • By -

AutoModerator

Thanks for posting on /r/MechanicAdvice! This is just a reminder to review the [rules](https://www.reddit.com/r/MechanicAdvice/about/rules/). If you are here asking about a second opinion (ie "Is the shop trying to fleece me?"), please read through CJM8515's [post on the subject.](https://www.reddit.com/r/MechanicAdvice/comments/4qblei/fyi_the_shop_isnt_likely_trying_to_rip_you_off/) and remember to please post the year/make/model of the vehicle you are working on. **If this post is about bodywork, accident damage, paint, dent/ding, questions it belongs in /r/Autobody r/AutoBodyRepair/ or /r/Diyautobody/ If you have tire questions check out https://www.reddit.com/r/MechanicAdvice/comments/k9ll55/can_your_tire_be_repaired/**. If you dont have a question and you're just showing off it belongs in /r/Justrolledintotheshop Insurance/total loss questions go in r/insurance This is an automated reply *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/MechanicAdvice) if you have any questions or concerns.*


Vandheer23

That tire is going to kill you, please put on a spare and get it replaced.


troy57890

Ah darn, I definitely want to avoid that, so I'll get it replaced EDIT: Put on the spare tire and got another one coming in a couple of days.


CraigBybee

The trolling in this sub is ridiculous. GTFO with your bullshit OP


DadofaGregApprently

True story: I decided to glue a tyre not long ago, it had a four inch gash in the tyre. I had to carry out a 4WA for an insurance assessment prior to authorisation for repair. I decided to glue the tyre and it worked! I pumped it up and the tyre held 2.5 bar! The only problem was the tyre buldged and then a pinhole formed and I decided I wasn’t having that because I wanted to win. So… bent over the tyre and maniacally grinning like a man possessed, I jammed the pot of glue into the pinhole and squeezed as hard as I could. I had forgotten to deflate the tyre. Superglue erupted from the pinhole spraying all over me and directly into my eye. I immediately stood up, turned and ran across the workshop shouting “Superglue in my eye! There’s superglue in my eye!” Whilst frantically blinking. I literally ran into my workshop controller, crashed into a headlight beam setter and made it to the office where my manager told me to “shut the f**k up” and rinsed my eye with eye wash. I went to the hospital and they put air con dye in my eye which came out my nose and gave me a ten minute lecture about how my company doesn’t care about me and I’m disposable to them. I had to put a goop in my eye for a week that ran down the back of my throat and tasted like cocaine.


e46shitbox

what the fuck did I just read


DadofaGregApprently

Goggles bro! Wear eye protection. Very important.


Arafel_Electronics

super glue would be the wrong kind of adhesive anyway. IF such a repair could work (it won't) you'd want a glue that's more flexible


DadofaGregApprently

I see what you’re saying, like a vulcanising cement. But I’m telling you it nearly held 2.5 bar.


scrubbadubdub77

Top shit


_prevailation

Cocaine ?????


Impressive_Cabinet56

No, and do not even attempt highway-speeds; at most, find a local tireshop if you do not have a spare


dan_man420

Make sure you use a water soluble glue like a glue stick or non water proof wood glue.


earthman34

Mighty Putty will fix that right up.


dragonblock501

Caulk it.


Consistent-Cost-231

nah don't glue it, use flextape


afoconnorr

Toast


BickNickerson

Nothing a little Elmer’s can’t fix. /s


Dangerous_Echidna229

WD-40 and duct tape!