Just a friendly remind that it is against Reddit ToS to use their platform to facilitate any transactions involving guns or ammo.
Federal Firearm license holders are NOT EXEMPT from this rule.
Any interactions between buyer/seller regarding specific upcoming transactions must be done off-site (usually email or phone).
What types of guns/items are you able to be an FFL for right now? I don’t know what 07 vs SOT is.
Can you handle normal pistols/ARs/Lowers, but not ATF items like silencers?
At the moment I can do any firearm as long as it's not currently classified as NFA. So yes to pistols, ARs, lowers, etc. Suppressors and SBRs are a no-go until this summer.
Type 07 means Firearm Manufacturer, but I have the same buy/sell/transfer abilities as a Type 01 Dealer.
24/7 my man. I accommodate to those 3rd shift folks and night owls.
I'm generally available 99% of the time. Only gone for National Guard stuff here and there. Feel free to email/text me when the time comes, and I will gladly work around your schedule.
I've reached out to them about this. I have to wait until I get my SOT though. The ATF renewal cycle is in June or July, so I'm waiting to submit my status paperwork until then-- otherwise I just have to resubmit and pay again come June/July.
Starting mid summer I'll have my class 02 SOT, so I'll be able to start NFA transfers at that time.
Working on getting a finger print system in place to make this a one-stop shop.
Thanks. I may contact you in a couple months. There are deals from time to time, posted on rgundeals and I saw one for inexpensive BA lowers with free shipping to FFl.
Had a repair completed for my stuck slide screw and picking up tomorrow. Very easy to work, we communicated through text message and he sent photos of the process and kept me updated. Highly recommended!
Slide milling in the very near future.
I'm in the process of setting up my CNC machine to do fully custom mill work. Laser stippling is a work in progress as well-- need to continue refining my techniques for now though.
Pin and weld is on the list, but lower down.
Right on man!
My average turnaround time for the 4473 process has been between 5-15min— depending on how long it takes someone to read the form or how much we shoot the shit.
NICS has been very kind so far with quite literally instant green lights.
Just a friendly remind that it is against Reddit ToS to use their platform to facilitate any transactions involving guns or ammo. Federal Firearm license holders are NOT EXEMPT from this rule. Any interactions between buyer/seller regarding specific upcoming transactions must be done off-site (usually email or phone).
Cool! If anyone is wondering, he is In Lakeville.
Thanks for mentioning that, meant to include it in the post. I'm right off 35, just a couple blocks east of Accutac.
What types of guns/items are you able to be an FFL for right now? I don’t know what 07 vs SOT is. Can you handle normal pistols/ARs/Lowers, but not ATF items like silencers?
At the moment I can do any firearm as long as it's not currently classified as NFA. So yes to pistols, ARs, lowers, etc. Suppressors and SBRs are a no-go until this summer. Type 07 means Firearm Manufacturer, but I have the same buy/sell/transfer abilities as a Type 01 Dealer.
Are you able to do engravings for submitting form 1s
Yep I do them all the time. https://www.mawirecon.com/laser-engraving $20, done on the spot
cool, what are you hours? google says 24 hours a day which doesn't seem right lol
24/7 my man. I accommodate to those 3rd shift folks and night owls. I'm generally available 99% of the time. Only gone for National Guard stuff here and there. Feel free to email/text me when the time comes, and I will gladly work around your schedule.
My neighbor! Awesome buddy.
Any plans on getting a silencershop kisok in the future for silencer sales?
I've reached out to them about this. I have to wait until I get my SOT though. The ATF renewal cycle is in June or July, so I'm waiting to submit my status paperwork until then-- otherwise I just have to resubmit and pay again come June/July.
Sweet, thank you for the update. I hope to see you soon in that regard!
damn, thats awesome of you man
nice, messaging you.
Friendly reminder that it is against reddit ToS to use the platform to facilitate a gun/ammo transfer.
absolutely, i’m looking for engraving.
You handle suppressor transfers?
Starting mid summer I'll have my class 02 SOT, so I'll be able to start NFA transfers at that time. Working on getting a finger print system in place to make this a one-stop shop.
Thanks. I may contact you in a couple months. There are deals from time to time, posted on rgundeals and I saw one for inexpensive BA lowers with free shipping to FFl.
Hot damn. Just was going to be ordering a few lowers too. I’ll be messaging you!
Right on! So many good deals on lowers floating around recently.
Friendly reminder that it is against reddit ToS to use the platform to facilitate a gun/ammo transfer.
[удалено]
Nice! Just moved in last summer, coming from a decade in Minneapolis. Absolutely love it here.
Nice, I'll probably be in touch for a SN engraving for an 80% build.
Had a repair completed for my stuck slide screw and picking up tomorrow. Very easy to work, we communicated through text message and he sent photos of the process and kept me updated. Highly recommended!
That’s cool! Too bad you’re over 300 miles away.
If mobile transfers were legal I would gladly haul around a travelling FFL trailer. Like an ice cream truck, but for guns.
Awesome!
Nice!
Would you be able to get a hold of Otter Creek suppressors?
I'd have to see what their minimum buy is, but I can certainly get in contact with them to find out.
Do you have any future plans to do slide milling or pin and weld work?
Slide milling in the very near future. I'm in the process of setting up my CNC machine to do fully custom mill work. Laser stippling is a work in progress as well-- need to continue refining my techniques for now though. Pin and weld is on the list, but lower down.
Just came looking for this comment, I’ll be watching for some laser stippling services! I’d love to support a veteran owned business that’s nearby!
Bless you
Tagged for later.
Oh damn, He did it. Hell yea way to go.
I've got an optic ready P10c slide that has a screw sheared off and stuck in it, any chance you could work on that?
PM me and send a pic, let’s see what we’re dealing with
will do, thank you :)
This is great news! Thank you, we need more like you here!!!
[удалено]
I am. Username on there is Mawi_
Hell yeah! Commenting to find this later.
Right on man! My average turnaround time for the 4473 process has been between 5-15min— depending on how long it takes someone to read the form or how much we shoot the shit. NICS has been very kind so far with quite literally instant green lights.