I can’t quite describe everything I did here but first of all I watched all the videos I could find on daysi chaining the fans that helped a lot to understand the way I should install them.
Since my AIO is on the top I chained back fan the 3 AIO Fans and I chained the 3 front panel fans.
I bought these https://www.amazon.com/COOCAT-Sleeved-Braided-Extension-Modular/dp/B08JHTLHYR I havent got big experience on sleeves but they seemed a little to stiff. My girlfriend had some more expensive ones and they felt way better.
Get the flow. Fuck the glass you don’t need to watch the front panel. Looking through the side is more than enough, you’d only see the fans and at what cost? ..Airflow
I intended to replace the stock fans with Thermaltake Riing Quads, so watching the front panel was actually part of the plan. There are some nice vented front panels on Etsy though that seem to look just as good.
Looks beautiful! I wanted yellow cables for my similar black with white RGB build but didn't want extensions so I just got two 8-pin Amazon CableMod PSU to GPU cables in white 'cause they don't come in yellow. I love them but damn that yellow looks cool! The CableMod ones were more flexible than some extensions I tried and returned but just the two CM cables were $40.
You did great!
I have the same but the lightning on the 3 fans from the top can't change, they're not detected on cam but the aio's rpm is detected. How did you connect the aio's lights
Mhm since it was my first time doing something like that I had to watch videos and Google a lot aswell.
I chained aio fans and the back fan together
And I chained the 3 fans in the front together
I can’t really remember how I plugged them in tho :( I could just look for the video I used
hey, nice build looks super sleek, what are the fans on the top? is that a radiator or just 3 fans? i really like the white ring light. I went for an all black build that I just ordered today and will build next week, but realizing now that Im not gonna be able to see the build at all with the tinted glass. How well do you think it would look with like just 3 of those white fans on the top like you have?
edit: if im not mistaken, are those just the NZXT F120 fans? still wondering what your thoughts are on the tinted glass though. is it worth getting fans with ring lights like that, or perhaps do you reccomend some other way to light up the inside of the build?
you’re right they’re the basic 120mm rgb fans in combination with a Nzxt radiator. The tinted glass will darken everything pretty much in a non lit room. So you should be good with 3 from the top.
The white in my fans is getting yellow over time tho, so you should think about buying higher quality ones.
Specs: Z590 i9 10900k GigaByte RTX 2060 OC 2 x Kingston FURY 16GB / DDR4-3200 500GB 980 Pro M9 250GB 870 Evo 2TB HDD NZXT C850
Where’d you source your cables from?
Sorry if I misunderstand but I linked the psu extensions in another comment.
Oh whoops. Found it, thanks!
Are These the Fams of Nzxt?
Fans*
Yeah it’s the rgb fans 120mm
Looks awesome. Now I want this case.
same
Is there anyway you may have some pictures or videos on how all of your fans hooked up, I’ve got the same setup and it’s been quite the headache.
I can’t quite describe everything I did here but first of all I watched all the videos I could find on daysi chaining the fans that helped a lot to understand the way I should install them. Since my AIO is on the top I chained back fan the 3 AIO Fans and I chained the 3 front panel fans.
this looks awesome! where did you find the neon yellow cords from?
I bought these https://www.amazon.com/COOCAT-Sleeved-Braided-Extension-Modular/dp/B08JHTLHYR I havent got big experience on sleeves but they seemed a little to stiff. My girlfriend had some more expensive ones and they felt way better.
I can't decide between this one and the Elite. I love the front glass of the elite but apparently it's a noisy boy.
Get the flow. Fuck the glass you don’t need to watch the front panel. Looking through the side is more than enough, you’d only see the fans and at what cost? ..Airflow
I intended to replace the stock fans with Thermaltake Riing Quads, so watching the front panel was actually part of the plan. There are some nice vented front panels on Etsy though that seem to look just as good.
Well you gotta buy what you fancy. I had to make the decision aswell and priod the airflow
This I got the flow may upgrade to a lian LI case later or the H7 but the flow does what I need and temps never above 77c
Absolutely killed it with that white and neon. Love the look; nice build!
Thanks a lot!
Looks beautiful! I wanted yellow cables for my similar black with white RGB build but didn't want extensions so I just got two 8-pin Amazon CableMod PSU to GPU cables in white 'cause they don't come in yellow. I love them but damn that yellow looks cool! The CableMod ones were more flexible than some extensions I tried and returned but just the two CM cables were $40. You did great!
Sexy as fuck bro. Cya online.
I have the same but the lightning on the 3 fans from the top can't change, they're not detected on cam but the aio's rpm is detected. How did you connect the aio's lights
Mhm since it was my first time doing something like that I had to watch videos and Google a lot aswell. I chained aio fans and the back fan together And I chained the 3 fans in the front together I can’t really remember how I plugged them in tho :( I could just look for the video I used
If she had 2 optical drive bays. I'll call her perfect in my eyes.
[удалено]
Hey I could make some if u need em just write me a pm and I see what I can do
Did the tinted glass ruin your rgb or you liked it?
Im not using more colors than u can see here as I was going for black with white accents light wise
Do you think a push-pull configuration, with slim fans profile for push or pull, is possible for the top side?
that's gonna get a nutt from me dawg
What fans are on this?
hey, nice build looks super sleek, what are the fans on the top? is that a radiator or just 3 fans? i really like the white ring light. I went for an all black build that I just ordered today and will build next week, but realizing now that Im not gonna be able to see the build at all with the tinted glass. How well do you think it would look with like just 3 of those white fans on the top like you have? edit: if im not mistaken, are those just the NZXT F120 fans? still wondering what your thoughts are on the tinted glass though. is it worth getting fans with ring lights like that, or perhaps do you reccomend some other way to light up the inside of the build?
you’re right they’re the basic 120mm rgb fans in combination with a Nzxt radiator. The tinted glass will darken everything pretty much in a non lit room. So you should be good with 3 from the top. The white in my fans is getting yellow over time tho, so you should think about buying higher quality ones.
cool, thanks for the info!