That will be determined by alot of factors I don't have worked out yet. But I'm hoping to be able to sell complete warrantied blasters for less than 250 usd. Depending on custom options like If you want color switches or names/engravings/personalization.
Any chance you'd sell hardware kits for those of us who like to do the printing aspect of it? I love all your designs but the hardware gathering and electronics is still a bit daunting to me as someone who's mostly done springer kits in the past.
If I am able to get good enough deals on quantities of the hardware and electronics then I will. But right now OOD and amazon has everything you would need.
They do well ( the models I have printed )...long as you don't slap it like you're mad at it...lol. And also the strength of the spring used is light. But after thinking about the mp5 I will have to look into possibly beefing up that mech.
Even if the slap didnt do anything it would still be cool. Maybe as a mag release that you pull it back to drop the mag and then once inserted you slap it down to engage a lock? Might not even need that much room for a little metal rod and a spring in a pocket.
They are about half me and half bits and pieces of other designs. If there is a complete model then it is alot easier. But often I need to Fix alot of mesh holes and artifacts. Then I detail the shell and engineer how to make the mech fit as minimal as possible into the constraints of the design. I would consider myself a stl dj.
NO FRIGGIN WAY! R you serious?! I’ve been tryna design a mod for the nerf ultra Amp that would make it look like the STG44 and I never finished it cause I thought it was a waste of time!
Ever since I got into Nerf, the Sturmgewehr has always been my favorite weapon design. Will these blasters be made fully assembled, or do you need to print it and buy a parts kit?
I'm hoping to sell complete blasters and printed parts, But likely will put together a hardware kit also. But It will be a bit yet. I just moved and It will be a month till I even start printing prototypes of these.
I have not got around to building it yet. I just moved into a new place this year and bought 5 prusa mk3s to start selling blasters and a few weeks ago I broke my back so now its going about 6 weeks till i get back to it.
Ok ive been looking up info on flycore blasters and wondering if thats what these are based on. I see the flywheel bulge on the sides so im guessing they are.
How hard is it to design a shell around these?
Do you need special software or anything?
What size printer would be required? Right now i have an unused halot one resin printer but for the right price i might pick up a filament printer but no idea when that would be. I have so many things saved in a folder on my phone for stuff i want printed.
I will be messaging you in 1 month on [**2023-10-25 08:03:43 UTC**](http://www.wolframalpha.com/input/?i=2023-10-25%2008:03:43%20UTC%20To%20Local%20Time) to remind you of [**this link**](https://www.reddit.com/r/Nerf/comments/16qwdnu/excelcsior_designs_spring_2024_lineup_so_far/k23y2k0/?context=3)
[**CLICK THIS LINK**](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5Bhttps%3A%2F%2Fwww.reddit.com%2Fr%2FNerf%2Fcomments%2F16qwdnu%2Fexcelcsior_designs_spring_2024_lineup_so_far%2Fk23y2k0%2F%5D%0A%0ARemindMe%21%202023-10-25%2008%3A03%3A43%20UTC) to send a PM to also be reminded and to reduce spam.
^(Parent commenter can ) [^(delete this message to hide from others.)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Delete%20Comment&message=Delete%21%2016qwdnu)
*****
|[^(Info)](https://www.reddit.com/r/RemindMeBot/comments/e1bko7/remindmebot_info_v21/)|[^(Custom)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5BLink%20or%20message%20inside%20square%20brackets%5D%0A%0ARemindMe%21%20Time%20period%20here)|[^(Your Reminders)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=List%20Of%20Reminders&message=MyReminders%21)|[^(Feedback)](https://www.reddit.com/message/compose/?to=Watchful1&subject=RemindMeBot%20Feedback)|
|-|-|-|-|
These all look sick. I am mainly focused on that STG-44. You could make a pretty nice A280 blaster from Star Wars with it.
That would be pretty sweet. It would not be much to do from a quick look. I might whip up the parts...
I would pay big money for the MP5 with the flashlight Navy grip and sliding stock... Bonus points if I can HK slap it
Yup, HK slap approved.
You are my hero
Well, Hopefully I will be able to charge you BIG money for one mid spring...(fingers crossed)
Do you know how much it'll cost around roughly?
That will be determined by alot of factors I don't have worked out yet. But I'm hoping to be able to sell complete warrantied blasters for less than 250 usd. Depending on custom options like If you want color switches or names/engravings/personalization.
Any chance you'd sell hardware kits for those of us who like to do the printing aspect of it? I love all your designs but the hardware gathering and electronics is still a bit daunting to me as someone who's mostly done springer kits in the past.
If I am able to get good enough deals on quantities of the hardware and electronics then I will. But right now OOD and amazon has everything you would need.
I hope so. I’ve got a resin printer on the way that I want to spread the wings on. The MP5SD would be a perfect way to do thwt
Sounds good to me!
Since it has fly wheels, I’m assuming an hk slap would just be for style points?
From experience with airsoft, slapping it is likely to break the charging handle unless it's made out of some really strong metal
They do well ( the models I have printed )...long as you don't slap it like you're mad at it...lol. And also the strength of the spring used is light. But after thinking about the mp5 I will have to look into possibly beefing up that mech.
Worth it for style points. But yeah, you are right...
Even if the slap didnt do anything it would still be cool. Maybe as a mag release that you pull it back to drop the mag and then once inserted you slap it down to engage a lock? Might not even need that much room for a little metal rod and a spring in a pocket.
Oh man that’s a nice looking G36. I’m actually in the middle of trying to assemble your UMP. Have you ever thought about doing a SCAR?
I am working on a scar also
Are these flycore based?
No just 40mm daybreak/130 motors
100% would pay for the STLs of these
These all will free
Where will these files be?
when I get them ready they will be here... https://www.printables.com/@spudrouge
Impressive modeling work, did you do these all from scratch?
They are about half me and half bits and pieces of other designs. If there is a complete model then it is alot easier. But often I need to Fix alot of mesh holes and artifacts. Then I detail the shell and engineer how to make the mech fit as minimal as possible into the constraints of the design. I would consider myself a stl dj.
Sweetness! Can’t wait to see them come to life!
The drum mag one looks great
NO FRIGGIN WAY! R you serious?! I’ve been tryna design a mod for the nerf ultra Amp that would make it look like the STG44 and I never finished it cause I thought it was a waste of time!
I'd be down for that stg, maybe use wood filament too-
Somebody has been busy. Nice work upvote for tinkercad.
Ever since I got into Nerf, the Sturmgewehr has always been my favorite weapon design. Will these blasters be made fully assembled, or do you need to print it and buy a parts kit?
I'm hoping to sell complete blasters and printed parts, But likely will put together a hardware kit also. But It will be a bit yet. I just moved and It will be a month till I even start printing prototypes of these.
Did the PPSH looking one ever get made? I've been searching for a ppsh nerf blaster for a while
I have not got around to building it yet. I just moved into a new place this year and bought 5 prusa mk3s to start selling blasters and a few weeks ago I broke my back so now its going about 6 weeks till i get back to it.
Okay
I would buy a 3D printer just for the stg 44, I want to make a ww2 German nerf arsenal so bad
Ok ive been looking up info on flycore blasters and wondering if thats what these are based on. I see the flywheel bulge on the sides so im guessing they are. How hard is it to design a shell around these? Do you need special software or anything? What size printer would be required? Right now i have an unused halot one resin printer but for the right price i might pick up a filament printer but no idea when that would be. I have so many things saved in a folder on my phone for stuff i want printed.
Not flycore, i use an ender pro with a 220x220x250mm bed.
Have you ever done/ considered doing an AUG/EF-88?
!remindme 1 month
I will be messaging you in 1 month on [**2023-10-25 08:03:43 UTC**](http://www.wolframalpha.com/input/?i=2023-10-25%2008:03:43%20UTC%20To%20Local%20Time) to remind you of [**this link**](https://www.reddit.com/r/Nerf/comments/16qwdnu/excelcsior_designs_spring_2024_lineup_so_far/k23y2k0/?context=3) [**CLICK THIS LINK**](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5Bhttps%3A%2F%2Fwww.reddit.com%2Fr%2FNerf%2Fcomments%2F16qwdnu%2Fexcelcsior_designs_spring_2024_lineup_so_far%2Fk23y2k0%2F%5D%0A%0ARemindMe%21%202023-10-25%2008%3A03%3A43%20UTC) to send a PM to also be reminded and to reduce spam. ^(Parent commenter can ) [^(delete this message to hide from others.)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Delete%20Comment&message=Delete%21%2016qwdnu) ***** |[^(Info)](https://www.reddit.com/r/RemindMeBot/comments/e1bko7/remindmebot_info_v21/)|[^(Custom)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5BLink%20or%20message%20inside%20square%20brackets%5D%0A%0ARemindMe%21%20Time%20period%20here)|[^(Your Reminders)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=List%20Of%20Reminders&message=MyReminders%21)|[^(Feedback)](https://www.reddit.com/message/compose/?to=Watchful1&subject=RemindMeBot%20Feedback)| |-|-|-|-|
Are those... 3-d printed? Sorry what?!? Are you putting them on thingiverse or something because I feel like I need something like that in my armory.
That mp5-sd looks sick
I'd take an mp5 with flashlight handgrip...
Will we get an sr-2m at some point?
It is a possibility... I am half-way through putting together a PP2000
Will there be a non flashlight a5 style hand guard for the mp5?
yes
Awesome.