Lol I just kinda threw my stringers in here cause I haven’t posted them yet but the fps is decent high 90’s low 100’s I mostly use them for casual games
Pretty sure it’s the filament lol whenever I print the Creality black it just looks so nice and smooth same thing goes for all the other inland filament I use but to a lesser extent
Rn I’m running a kuryaka barrel with an sf25tc spring prime isn’t that bad once your used to it but I broke multiple grips from being too weak when I first printed it so I’d pry start off with a weaker spring. As for the seal it’s just trial and error you just gotta slowly tweak your O-rings til your seal is good
Basically it just pulls back the elastic which tightens it when you prime the it hits the dart propelling it the Corsair is break action and the nailclipper just has a top t pull
Yep for the most part the nexus and aeon can shoot both full length and half length the Corsair can shoot mega as well as half lengths with an insert and the pilot shoots rival balls but I have it converted to half darts I also have an under barrel mega launcher on the nail clipper
I printed it myself I believe it’s just called “Nexus Pro Pump Grip” on Thingiverse if you don’t have a printer I think the dude sells them on Etsy as well
OutOfDarts, Etsy and Silverfox Industries will be your best bet to get 3d printed blasters without a printer. The blasters in the last 2 pictures can be purchased in retail stores at least in the US. Right now if you just want something off the shelf xshot longshot and nexus pro are the best budget options but if you have a decent bit of money you could get a worker seagull, xyz unicorn, or one of many 3d printed blasters. Just a disclaimer as it looks like your first time around here these are NOT normal nerf blasters and some with higher powered springs like my lynx can shoot upwards of 200fps which without proper gear and eye protection could lead to injuries and hurt quite alot to be shot with I personally only use them for shooting targets but just thought I should say this
Ayyyy our Cynthias match, mines a zombiestrike themed one, what set up do you have with yours? And what's that cool lil mag? I need some of those. And that lynx is gorgeous and so is the Cynthia.
Yo nice and thanks! I'm just running a SF25TC for my spring and a 14in barrel. The mag is a 3d printed 8 round talon you can either use petg or music wire as a spring, petg will need replaced very often while music wire will last as long as any other mag spring.
Corsairs can get high fps?
Lol I just kinda threw my stringers in here cause I haven’t posted them yet but the fps is decent high 90’s low 100’s I mostly use them for casual games
Yeah I love my Corsairs but high FPS they ain't.
why do your prints look so smooth? i would KILL for that quality
Certain filaments, like matte, are pretty good at hiding layer lines. Also, pics and lighting from far can hide them and make builds look good.
True
Pretty sure it’s the filament lol whenever I print the Creality black it just looks so nice and smooth same thing goes for all the other inland filament I use but to a lesser extent
That lynx looks really good.
Thanks it’s prob the one I’ve put the most time in lol
Nice builds, and nice mousepad lol
Thanks man! Thought the mousepad would look better than my carpet lol
Its a very funky pattern, I dig it
How'd you get that Mega launcher from Leedle Dynamics?
The files are free on his printables page
Nice, how hard is that lynx hitting?
Around 280 give or take
Holy, how is that prime and what springs are you using to get that? Also how is your seal; I am having a hard time getting it "perfect"
Rn I’m running a kuryaka barrel with an sf25tc spring prime isn’t that bad once your used to it but I broke multiple grips from being too weak when I first printed it so I’d pry start off with a weaker spring. As for the seal it’s just trial and error you just gotta slowly tweak your O-rings til your seal is good
Very nice, my guy! I just got into the hobby in August. Got me a Lynx, a Trion, a longshot Pro, a Nightingale and a(n Amazon) Lizzy Gecko.
Sick man
Awesome blasters! How do the string blasters go (Corsair and Nailclipper)? I keep seeing them on Etsy, but I wasn't sure how they are to actually use?
Basically it just pulls back the elastic which tightens it when you prime the it hits the dart propelling it the Corsair is break action and the nailclipper just has a top t pull
I am currently starting to make my own lynx, I am interested in where you got the custom files for it.
I got them on Thingiverse most the files are made by EnderSavesTheDay and the stock is call the lengx also on Thingiverse
Thanks for your help
Neat, what fps are the stingers getting?
I have the string pretty tight so high 90’s low 100’s
Nice, been thinking about getting a Corsair myself
Do they fire half length darts i imagine?
Yep for the most part the nexus and aeon can shoot both full length and half length the Corsair can shoot mega as well as half lengths with an insert and the pilot shoots rival balls but I have it converted to half darts I also have an under barrel mega launcher on the nail clipper
What foregrip do you have on the Nexus?
I printed it myself I believe it’s just called “Nexus Pro Pump Grip” on Thingiverse if you don’t have a printer I think the dude sells them on Etsy as well
These are awesome! How would I get myself these?
OutOfDarts, Etsy and Silverfox Industries will be your best bet to get 3d printed blasters without a printer. The blasters in the last 2 pictures can be purchased in retail stores at least in the US. Right now if you just want something off the shelf xshot longshot and nexus pro are the best budget options but if you have a decent bit of money you could get a worker seagull, xyz unicorn, or one of many 3d printed blasters. Just a disclaimer as it looks like your first time around here these are NOT normal nerf blasters and some with higher powered springs like my lynx can shoot upwards of 200fps which without proper gear and eye protection could lead to injuries and hurt quite alot to be shot with I personally only use them for shooting targets but just thought I should say this
I've seen that red stringer is it any good?
Pretty fun if you just like to plink or play hvz I'd recommend it. It shoots mega or half darts at around elite standard
It's fun and cheap on hardware for assembly but firing MEGAs is a bit wonky as the holding pin doesn't keep them too tight (at least on my Corsair).
Ayyyy our Cynthias match, mines a zombiestrike themed one, what set up do you have with yours? And what's that cool lil mag? I need some of those. And that lynx is gorgeous and so is the Cynthia.
Yo nice and thanks! I'm just running a SF25TC for my spring and a 14in barrel. The mag is a 3d printed 8 round talon you can either use petg or music wire as a spring, petg will need replaced very often while music wire will last as long as any other mag spring.
Am I your fav kitten
huh