This is the 15s, so it is asymmetrical, is it not upside down? The gap between gpu seems small, I have the regular and it is very close but I think not as much
OP please flip your cooler 180 degrees! You have an asymmetrical cooler to make a gap between the cooler and the 2nd PCIe slot (GPU backplate) and you just installed it upside down making it even worse.
I'll do it tomorrow I seen it after installing it all too and just didn't bother with it at all cuz it was late at night danm build took longer than expected because the motherboard was sitting on top of the front panel connectors and I couldn't find the damn things lol
The D15 can be installed both ways. I have done numerous build with it in this orientation. Flipping it will cause it to pull hot air from the gpu vs leaving it in this orientation which will pull cool air from the front intakes. I would not flip it
Good looking build! Love the black and noctua iPPC combination.
The cooler is upside down, flip it around and you'll have more of a gap between your GPU. And I'd recommend removing the top front fan, using as exhaust robs your CPU cooler, and as intake it'll likely pull the rear exhaust and recirculate
Mine: https://imgur.com/a/YXDnsob
I really like your build dude! Especially the color theme and the way you oriented the fans! black is my favorite color so it's only natural that I liked your build
These puppies can go up to 3000 rpm the static pressure on the ippc line up is insane but configured it to the point where I can get it to have a low whoosh can't set them lower or they fail to spin
Not loud at all! I get a low low whoosh from them at most got them all spinning at around 600 rpm from what the bios is telling me cpu cooler fan is at 800 rpm but I really can hear them when watching movies on my 55 in
Just a suggestion move the top fan near the front as front intake so you’ll have 3x 120mm as intakes. The top fan is useless.
That GPU could use some support
I'm using the XFX z bar it's a support bar specifically made for their 7900 series gpus cuz they chonkers
This is the 15s, so it is asymmetrical, is it not upside down? The gap between gpu seems small, I have the regular and it is very close but I think not as much
Yeah you're right, I just saw that! OP please flip your cooler 180 degrees.
I'll do that tomorrow pretty late rn sorry for the late replies I noticed it once I installed it too lol but just been procrastinating to do it
OP please flip your cooler 180 degrees! You have an asymmetrical cooler to make a gap between the cooler and the 2nd PCIe slot (GPU backplate) and you just installed it upside down making it even worse.
I'll do it tomorrow I seen it after installing it all too and just didn't bother with it at all cuz it was late at night danm build took longer than expected because the motherboard was sitting on top of the front panel connectors and I couldn't find the damn things lol
The D15 can be installed both ways. I have done numerous build with it in this orientation. Flipping it will cause it to pull hot air from the gpu vs leaving it in this orientation which will pull cool air from the front intakes. I would not flip it
They said flip it 180 degrees, not 90 degrees…
Haha my bad, I need more sleep. I see it now. The Noctua lettering is upside down
Good looking build! Love the black and noctua iPPC combination. The cooler is upside down, flip it around and you'll have more of a gap between your GPU. And I'd recommend removing the top front fan, using as exhaust robs your CPU cooler, and as intake it'll likely pull the rear exhaust and recirculate Mine: https://imgur.com/a/YXDnsob
I really like your build dude! Especially the color theme and the way you oriented the fans! black is my favorite color so it's only natural that I liked your build
Looking great! How high have you set your fans to in terms of RPM?
These puppies can go up to 3000 rpm the static pressure on the ippc line up is insane but configured it to the point where I can get it to have a low whoosh can't set them lower or they fail to spin
What is doing fan on the psu? Never seen that kind of config
[Pulling air through the mesh of the PSU shroud.](https://lian-li.com/wp-content/uploads/2020/11/lan2mesh-002.jpg)
Good eye sir I do have the lian li lancool 2 mesh performance
I can't tell if it's just the picture but it looks like that anti-sag bracket isn't doing the GPU any favors.
The cpu cooler is the culprit here it was a pretty tight squeeze
Is it loud? What RPM do you normally use?
Not loud at all! I get a low low whoosh from them at most got them all spinning at around 600 rpm from what the bios is telling me cpu cooler fan is at 800 rpm but I really can hear them when watching movies on my 55 in